Kogan Interactive 20-sided Baby Playpen User Guide

Kogan Interactive 20-sided Baby Playpen User Guide

SAFETY & WARNINGS

Warning

• This product should be assembled by an adult.
• Keep away from fire or any source of ignition.
• Ensure the installation area is ventilated.
• Place in a well-lit room.
• Do not use the product upside down.
• Check that all parts are assembled well and are stable before use.
• Packing materials are not toys, keep them away from children.
• The recommended age for the product usage is 3 months – 6 years.
•  Supervise children while they are playing inside the playpen. Do not allow them to climb the playpen.

Surface Recommendations

Do not place on the sand surface or uneven ground

Do not place in water or water seepage

Place on a flat, spacious floor

COMPONENTS

Door Panel (x1)                                       Small Panels (x18)

Game Panel with Sound Elements (x1)                        Base Connectors (x20)

INSTALLATION

Step 1

Insert a small panel into a base connector.

Step 2

Align a second small panel parallel with the first small panel. Insert the second small panel into the base connector and at the opening of the first small panel as shown in the image.
Ensure the small panels are fixed firmly.

Step 3

Repeat step 2 to attach the remaining small panels and the base connector. Attach the door panel and game panel by following the step 2 instructions to complete the playpen as shown in the image.
Ensure the playpen is properly installed and firmly fixed on the surface before use.

Step 4

To open the door panel, slide the lock to the right. To close the door panel, slide the lock to the left.

Note: Each panel will be connected to a base connector with a suction cup. This enables the playpen to stand firmly.

Tips:

• To increase the stability of the playpen, ensure to fix firmly.
• Check regularly whether the small panels are attached firmly on the surface.
• Ensure to disassemble the playpen carefully and gently.

CLEANING & CARE

• Clean the suction cups regularly.
• Use sponge and soapy water or other non-corrosive cleaning agents to clean the roduct.

TROUBLESHOOTING

The suction cups of base connectors are not sticking.

| The surface may be rough. Ensure to assemble the playpen on a smooth flat surface so that the suction cup can stick firmly on the surface.

See the Safety & Warnings section of this user guide.

---|---
If there is any debris on the suction cups, clean them with water.
If the suction cups have poor suction capability, soak it in boiling water and then paste it on the smooth flat surface when it is hot.

SPECIFICATIONS

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.

Read More About This Manual & Download PDF:

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>