tzumi Desk Lamp Wireless Charging User Manual
- June 6, 2024
- Tzumi
Table of Contents
ATMOSPHERES
Desk Lamp
w/Wireless Charging
Manual
INTRODUCTION
The Atmospheres Desk Lamp w/Wireless Charging is a part of tzumi’s continuing pursuit for creating highly efficient and convenient products for our customers. The Desk Lamp’s distinctive design allows it to be not only a desk/reading lamp, but also an apropos, innovative decoration for your living room, bedroom, or office. In addition, the Desk Lamp offers speedy Qi charging for all your compatible devices.
- Touch controls
- Energy-saving LED
- Multi-angle design
- Wireless Charging
WHAT’S IN THE BOX?
1- Desk Lamp w/ Wireless Charging
1- USB Cable
1- User Manual
DESK LAMP DIAGRAM
USING THE DESK LAMP
- Connect the USB cable to the lamp and plug the other end into a power outlet.
- Press the ON/OFF button to turn the lamp ON or OFF.
- Slide your finger across the brightness area to increase or decrease the brightness.
- Wireless Charging – If your smartphone has Qi wireless charging capabilities, it will automatically begin charging when it is placed against the Desk Lamp’s base. The Wireless charging indicator will light up blue when the device is charging. The wireless charging indicator will turn off when the device is removed or not properly aligned on the base.
SPECS
| Voltage: | DC 5V |
|---|---|
| Power: | 4W (Dimmable) |
| Wireless Charger Output: | 5W |
| Dimensions: | 15′ x 3′ (38.1 x 7.62 cm) |
180° Rotating Base
72″ Power Cord
IMPORTANT SAFEGUARDS
- This lamp should be used in between this temperature fange: -13° F to 95° F (-25°C to +35°C); relative humidity cannot exceed 98%.
- The lamp is for indoor use only.
- Please do not use/place the lamp in any kind of wet environment.
- Do not use solvents, abrasives, or aerosol cleaners to Clean the lamp as discoloring may occur.
- Please unplug the power adapter if the lamp is not being used for long periods of time.
- Please do not take the lamp apart and/or attempt to repair it by yourself.
- Do not place the power supply near heat or in direct sunlight.
- Do not place the lamp close to flammable items.
- Do not place the lamp in an unstable environment or on the slope which is greater than 6°.
- Please do not place metals or flammable items in the open spaces/holes in the lamp.
- If you encounter an abnormal situation when using the lamp (e.g. smoking, fumes, unpleasant odors, etc.) immediately unplug the lamp.
- Please do not touch the plug if your hands are wet.
- The power cord cannot be knotted, tied into a bundle, etc., please let the wire stretch normally.
- Do not use multi-function adapter plugs to plug in the lamp’s power adapter.
- Do not use the lamp when the power cord is damaged. It the cord is damaged, please contact tzumi customer support for replacement.
It you have any other questions or issues with product use and/or care, please contact tzumi Technical Support at: [email protected] or 1-855-GO-TZUMI.
tzumi™ Inc. Distributed by tzumi Inc. NY, NY 10016. © Copyright 2024 umi Inc.
All Rights Reserved. Made in China. Other trademarks and trade names are those
ot their
fespective owners, Subject to change without prior notice,