thdstatic Multiple Pendant Light Instruction Manual
- June 13, 2024
- thdstatic
Table of Contents
thdstatic Multiple Pendant Light
INSTRUCTION MANUAL
The installer and/or user must read, understand and follow these instructions
before installing the product. This product must be properly installed before
it is used. If instructions are not followed, the manufacturer will not be
held responsible for any problems or product malfunction.
Failure to follow installation and/or operating instructions voids the
warranty. We recommend that this product be installed by a certified
electrician. In some states or provinces, it is a legal requirement for this
type of product to be installed by a certified electrician, according to the
electrical and building codes effective in the region where the unit is used.
WARNING:
- Risk of electrical shock. Turn off breakerat the panel.
- Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance.
- Do not use outdoor. Residential use only. Indoor use only
HEIGHT ADJUSTMENT
NOTE: It is recommended to make any major adjustments to the height of the light fixture before installation.
- With the power off, measure the distance from the ceiling to the bottom of where you would like your light fixture to hang.
- To retract the wire, gently push it into the light fixture base (fig. 1).
- To extend the wire, push the metal collar while gently pulling the wire down (fig. 2). When the metal collar is released, the wire will be fixed into position.
- fixture over and slide the plastic wire retainer up to the wire nut, to prevent the pendant from slipping down when in use.Once the wire is at the desired length, turn the
WARNING: Risk of electrical shock. Turn off breakeratthe panel.
STEP-BY-STEP INSTALLATION
- Turn off power at the circuit breaker and the light switch.Ensure the power is off before continuing.
- Attach the mounting bracket to the junction box with the two junction box screws. Ensure the screws attached to the mounting bracket point away from the junction box (fig. 3).
- Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector. Connect the black wire (L) from the light fixture to the black supply wire (L) from the junction box using a wire connector. Connect the ground wire (G) from the light fixture to the ground supply wire (G) from the junction box using a wire connector (fig. 4).
- Put the wires into the canopy.
- Mount the canopy onto the mounting bracket and secure it
After-sales Service
Warranty
Thank you for choosing JoollySun lighting. Our after-sales team would be glad
to offer our top after-sales services to all our valued customers.
In case of a defect product and to deliver worry free products, we offer a
limited warranty for different products. All JoollySun pendant light series
enjoy a three-year warranty.
What does this warranty cover?
It covers any defects in material. It covers any defects in workmanship under
normal use.
If a defect in materials or workmanship appears in our products, we will
provide, at your choice, either free repair of the product, free replacement
of the same model number components or a complete refund of the original
purchase price.
2. What will we do to correct our problems?
We will repair the product at no cost if the product is still under warranty.
We will repair any broken parts of the product using new or replacement parts.
We will exchange the defect product with a new one for free.
We will offer a complete refund ofthe original purchase price.
3. What do you need to do?
To obtain warranty services, you must first contact us to determine the
problem and the most appropriate solution for you. The product must be in its
original packaging or the customer can send it in any package.
Any documents or accessories that shipped with the product must be included in
the package.
Please don’t hesitate to contact us if you have any further questions.
Customer service: [email protected]