MINISFORUM UN12S Mini Pc Instruction Manual
- June 9, 2024
- MINISFORUM
Table of Contents
MINISFORUM UN12S Mini Pc
Using Your Mini PC
Getting Started With Your Mini PC
Connect the display to the Mini PC’s HDMI™ port/ USB-C Port.
Connect the keyboard and mouse.
Connect the keyboard and mouse.
Turn on the power and start the Mini PC.
Turn Off Your Mini PC
If the Mini PC is frozen or slow to respond, press and hold the power button at least for 7 O seconds to force it shutdown.
Putting You Mini PC To Sleep
To put your Mini PC on Sleep mode, press the Power button once.
Installation Operation
Remove the foot mats, use a tool to unscrew the bottom shell screws, and then use a tool to open the bottom shell from the “FRONT” side.
DIV DDR
Install the Memory into the SO0IMM Slot by inserting it slantly into the buckles on both sides and fix it.
DIV SSD
Install the 550 into its slot by inserting it slantly and fix it with
screws.
DIV HDD
Put the HDD on the bottom cover and fix it with included screws, then connect the SATA cable.
Close the bottom cover and tighten the screws, then reattach the foot pads.
VESA
Mount Your Mini PC to a VESA Compatible Device
Please follow the steps below to install the Mini PC to a compatible VESA
compatible device:
-
Install the VESA Mount on the back of the device with the included screws. {A)
-
Place Mini PC upside down on a flat and stable surface and install the included screws to the screw holes of the bottom of the Mini PC.
Warning! Do not over tighten the screws as it may damage to your Mini PC. -
Fix the Mini PC to the VESA Mount of the monitor. (B)
Safety Information
Read and follow all instructions in the documentation before you operate your system to ensure your safety.
Safety Precautions
- Dust, moisture and drastic temperature changes will affect the product life, so please try to avoid placing the product in these places.
- The suitable temperature for the Notebook PC and accessories is 0°c ~ 35°C.
- Before you using this product, make sure you leave enough space around the system for ventilation. Please don’t block or cover these openings. Never insert objects of any kind into the ventilation openings.
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
- When you use the power extension cords, the total current of all connected products should be within the rated current of cables, ensuring stable operation.
Maintenance Guideline
- Do not step on the power cord or put anything on your Mini PC.
- Do not spill water or any other liquid over this product.
- There’s still some current passing through even when the system is off. To avoid severe damage caused by possible electric shock, plug out all power cables from sockets temporarily before cleaning or moving this product.
- If you encounter the following technical problems with the product unplug the power cord and contact a qualified service technician or your retailer.
FAQ
- The start-up speed may be slow in the following situations: unexpected restart, BIOS reset, memory bank replacement, and SSD replacement. Generally speaking, the start-up speed will return to normal after one successful power-on and power-off process.
- The core graphics card will occupy a part of the memory as GPU-specific memory.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna_
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected_
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, Human proximity to the antenna shall not
be less than 20cm(8 inches)during normal operation.
Caution : Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
Contact information
- Manufacturer : Micro Computer (HK) Tech Limited
- Website : https://www.miniscloud.com
- Address : FLAT /RM 18, 28/F, Shui On Centre, 6-8 Harbour Road, Waterfront Wan Chai , Hong Kong
- TEL: 852-23860910
Online Technical Support
- Website: https://www.minisforum.com/new/support
- Email: [email protected]