binardat 5Port2.5Gv 2.5G
Series
Ethernet Switch User Manual

binardat 5Port2.5Gv 2.5G
Series
Ethernet Switch

Product Information

Specifications

• Model: 2.5G Series Ethernet Switch
• Ports: 5-port or 8-port
• Forwarding Capability: Line speed per port
• Port Types: 10M/100M/1G/2.5Gbps RJ45/PoE

Product Characteristics
The 2.5G Series Ethernet Switch is a 5-port or 8-port switch with line speed forwarding capability per port. It features 5-port/8-port 10M/100M/1G/2.5Gbps RJ45/PoE ports, providing good network adaptability for applications such as security monitoring, diskless NAS, startup, and wireless networking.

Product Display

5-Port 2.5G Ethernet Switch

• 5 * 10M/100M/1G/2.5Gbps RJ45 Port
• Power Indicator

5-Port 2.5G PoE Ethernet Switch

• 5 * 10M/100M/1G/2.5Gbps RJ45 Port
• 2.5 * 10M/100M/1G/2.5Gbps PoE Port
• Power Indicator

8-Port 2.5G Ethernet Switch

• 8 * 10M/100M/1G/2.5Gbps RJ45 Port
• Power Indicator

8-Port 2.5G PoE Ethernet Switch

• 8 * 10M/100M/1G/2.5Gbps RJ45 Port
• 4.8 * 10M/100M/1G/2.5Gbps PoE Port
• Power Indicator

Indicator Definition

• PWR: When on, the switch is connected to the power supply.
• PoE: When on, PoE starts to supply power.
• LED Indicator: Left orange – 2.5Gbps transmission rate, green – 1Gbps transmission rate. Right green – 10/100M transmission rate.

Product Supporting List

• One switch (depending on the selected model)
• One power adapter
• A user manual and warranty card

Product Usage Instructions

Installation Guide

Power Socket Specification
The power line of the switch adopts a single-phase two-wire power socket. The left foot is zero line and the right foot is live line. Please check before operation.

Connect the Power Cord

1. Check that the selected power supply is consistent with the power supply requirements marked on the switch.
2. For the external type, connect the power adapter, connect AC100~240V, 50~60Hz, and DC input 52V as shown in the schematic diagram of power connection.

Post-Installation Inspection
After installation, please check the following items:

1. Check whether there is enough heat dissipation space around the switch and whether the air circulation is smooth.
2. Check whether the power supply of the power socket meets the specification of the switch.
3. Check that the power supply, switch, rack, and other equipment are properly grounded to avoid unnecessary damage and ensure safety.

Cleaning and Maintenance
In order to avoid the danger of electric shock, do not open the shell when the switch is working, and do not open it by yourself even when it is not charged. Before cleaning the switch, pull out the power plug of the switch. Do not wipe it with wet fabric or clean it with liquid. Avoid placing other heavy objects on the surface of the switch to avoid accidents.

Product Application

5 PoE 2.5G Application Example
This example shows a built-in dial-up routing function using a 5-port 2.5G PoE Ethernet Switch. It can be used for various applications such as connecting computers, cameras, recreational machines, and IPTV.

8 PoE 2.5G Application Example
This example shows a router dialing connection using an 8-port 2.5G PoE Ethernet Switch. It can be used with or without a route dialing function.

FAQ

• Q: What are the supported transmission rates of the switch?
  A: The switch supports 2.5Gbps, 1Gbps, and 10/100Mbps transmission rates.

• Q: Can I clean the switch with liquid?
  A: No, do not clean the switch with liquid. Use a dry cloth to wipe it.

Product introduction

5‑port / 8‑port 2.5Gbps switch, with line speed forwarding capability per port. With 5‑port / 8‑port 10M / 100M / 1G / 2.5Gbps RJ45/PoE port, this series of switches has good network adaptability for applications such as security monitoring, diskless NAS, startup and wireless networking.

Product characteristics

• Each port supports MDI / MDIX auto flip and duplex/rate self-negotiation.
• Support IEEE 802.3x full duplex flow control and backpressure half duplex flow control.
• Support IEEE 802.3af/at/poe++/BT(PoE switch only)
• Energy saving technology is adopted to automatically adjust the signal strength by detecting the length of network cable and workload, so as to effectively reduce energy consumption.
• The equipment meets the national CCC standard, fully meets the requirements of safety regulations, and is safe and reliable.
• Plug and play, no management required.
• Dynamic LED indicator provides simple working status prompt and troubleshooting.

Product display

Schematic diagram of front panel

1. 5*10M/100M/1G/2.5Gbps Rj45 Port
2. 5*10M/100M/1G/2.5Gbps PoE Port
3. 8*10M/100M/1G/2.5Gbps Rj45 Port
4. 8*10M/100M/1G/2.5Gbps PoE Port

Indicator definition

• PWR: When on, the switch is connected to the power supply
• PoE: When on, PoE starts to supply power
• LED indicator:

the indicator light is green: the transmission rate is 10 / 100M

Schematic diagram of rear panel

1. 5Port 2.5G Desktop style
2. 8Port 2.5G Desktop style

Product supporting list

Installation guide

Power socket specification
The power line of the switch adopts a single‑phase two‑wire power socket. The left foot is zero line and the right foot is live line. Please check before operation.

Connect the power cord

1. Check that the selected power supply is consistent with the power supply requirements marked on the switch;
2. For the external type, connect the power adapter, connect AC100 ~ 240V, 50 ~ 60Hz, and DC input 52V, as shown in Figure 1.1.2.

Post-installation inspection

Please check the following items after installation:

1. Check whether there is enough heat dissipation space around the switch and whether the air circulation is smooth；
2. Check whether the power supply of the power socket meets the specification of the switch；
3. Check that the power supply, switch, rack, and other equipment are properly grounded；

Matters needing attention

To avoid equipment damage and personal injury caused by improper use, please follow the following precautions:

• During installation, keep the power off, wear an anti‑static wrist, and ensure that the anti‑static wrist is in good contact with the skin to avoid potential safety hazards；
• The switch can work normally only under the correct power supply. Please confirm that the power supply voltage is consistent with the voltage marked by the switch;
• Before the switch is powered on, please confirm that it will not cause an overload of the power circuit, so as not to affect the normal operation of the switch or even cause unnecessary damage
• In order to avoid the danger of electric shock, do not open the shell when the switch is working, and do not open it by yourself even when it is not charged;
• Before cleaning the switch, pull out the power plug of the switch. Do not wipe it with wet fabric or clean it with liquid;
• Avoid placing other heavy objects on the surface of the switch to avoid accidents.

Product application

5PoE 2.5G Application example:

Connection example of optical cat’s own router

Schematic diagram of switch bottom

The bottom of the switch is equipped with a wall jack (Jack size: 5mm * 5mm)

8PoE 2.5G Application example:

Connection example of Optical Cat’s own router

Schematic diagram of switch bottom

The bottom of the switch is equipped with a wall jack (Jack size: 5mm * 5mm)

Technical parameter

Model| 5Port 2.5G(2G05‑041G)| 5PoE 2.5G(2G05‑041GP)| 8Port 2.5G(2G08‑080G)| 8PoE 2.5G(2G08‑080GP)
---|---|---|---|---
Fixed Port| 510M/100M/1Gbps/2.5Gbps  RJ45  port| 510M/100M/1Gbps/2.5Gbps PoE port| 810M/100M/1Gbps/2.5Gbps  RJ45  port| 810M/100M/1Gbps/2.5Gbps PoE port
PoE ports| | 1  port  supports  IEEE802at/at/poe++/BT(MAX_90

2‑5 port supports IEE802.3at/at(MAX_30W)

| W)| 1 port supports IEEE802at/at/bt(MAX_90W)

2‑8 port supports IEE802.3at/at(MAX_30W)

PoE out Pin|  | Port1:1/2(+),3/6(‑);  4/5(+),7/8(‑)

Port2‑5:1/2(+),3/6(‑)

|  | Port1:1/2(+),3/6(‑);  4/5(+),7/8(‑)

Port2‑8:1/2(+),3/6(‑)

Network protocol| IEEE 802.3/U、IEEE 802.3ab、IEEE 802.3bz、IEEE 802.3x
Port Specification| 10M/100M/1000M/2.5G  Auto
CPU| MIPS-34Kc Up to 800MHz CPU
Packet Buffer|

12Mbit SRAM

Jumbo frame| Up to 12KB
Bandwidth| 80Gbps
Packet Forwarding| 28.8Mpps
MAC Address| 16K
Transmission Distance| 10BASE-T ： Cat3,4,5 UTP(≤250 meter)

100BASE‑TX £ Cat5 or later UTP(150 meter) 2500/1000BASE‑TX £Cat6 or later UTP(150 meter)

LED Indicator| PWR: When on, the switch is connected to the power supply When the left network port lights orange, the transmission rate is 2.5Gbps

When the left network port lights green, the transmission rate is 1Gbps

When the green network port light on the right is on, the transmission rate is 10 / 100M

| PWR: When on, the switch is connected to the power supply PoE: When on, PoE starts to supply power

When the left network port lights orange, the transmission rate is 2.5Gbps

When the left network port lights green, the transmission rate is 1Gbps

When the green network port light on the right is on, the transmission rate is 10 / 100M

| PWR: When on, the switch is connected to the power supply When the left network port lights orange, the transmission rate is 2.5Gbps

When the left network port lights green, the transmission rate is 1Gbps

When the green network port light on the right is on, the transmission rate is 10 / 100M

| PWR: When on, the switch is connected to the power supply PoE: When on, PoE starts to supply power

When the left network port lights orange, the transmission rate is 2.5Gbps

When the left network port lights green, the transmission rate is 1Gbps

When the green network port light on the right is on, the transmission rate is 10 / 100M

Operating Temperature/ Humidity| -10～+55°C；5%～90% RH Non coagulation
Storage Temperature/ Humidity| -40～+75°C；5%～95% RH Non coagulation

Power

| Adaptor;MAX 650W(AC100-240V 50/60HZ MAX0.9A)|

Adaptor;MAX 650W(AC100-240V 50/60HZ MAX0.9A)

|

Adaptor;MAX 120W(AC100-240V 50/60HZ MAX1.5A)

|

Adaptor;MAX 15W(AC100-240V 50/60HZ MAX 0.3A)

Product size/Packing size (LWH）| 160mm112mm31mm

193mm131mm91mm

| 223mm113mm28mm 305mm205mm55mm
N.W/G.W(kg)| 0.58kg/1.09kg| 0.7kg/1.1kg
Installation| Desktop(optional wall+machine hanger parts)
Lightning protection level| 3KV 8/20us；IP30
Certificate| CE mark, commercial；CE/LVD EN60950； FCC Part 15 Class B；RoHS；
Warranty| Whole device for 1 year(Accessories not included)

Product parameters and appearance are subject to update or change without notice. Please refer to the official website by yourself.

Product packing list

Open the product packing box and take out the objects carefully. Please check the packing list carefully to ensure that all items are included and undamaged. If there is any shortage or damage of accessories, please contact us in time.

• 1 switch
• 1 power adapter
• 1 user manual

Warranty

Get help or claim warranty

Visit Here:
www.binardat.com/support/ or Scan QR Code

Wuhan niannianxingchen Technology Co., Ltd.

• No. 349 Guanshan Road, Gaoxin Avenue, Wuhan, Hubei, China.
• support@binardat.com.
• www.binardat.com.

References

• Binardat Store
• Contact Us

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>