SCHLAGE B60N Single Cylinder Satin Nickel Deadbolt Installation Guide
- June 6, 2024
- Schlage
Table of Contents
SCHLAGE DEADBOLT
INSTALLATION INTRUCTIONS
SAFETY INFORMATION
Read the precautions and instructions in this manual before installing and
using this lock. Save this manual for future reference.
WARNING If the door needs to be drilled, be familiar with how to use your
drill safely and understand all the door preparation steps before proceeding.
NOTE To ensure a long-lasting finish, remove the locks, or do not install
the locks, prior to painting your door. Periodically clean locks with mild
soap and a soft cloth. Do not use abrasives or harsh chemicals and avoid sharp
or scratching objects.
TOOLS REQUIRED / HARDWARE INCLUDED
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting Screws | 2 |
| BB | Latch/Strike Plate Screws | 4 |
| CC | Mounting Screws | 2 |
| Part | Description | Quantity |
|---|---|---|
| A | Key | 2 |
| B | Exterior Assembly | 1 |
| C | Deadbolt Latch | 1 |
| D | Interior Assembly | 1 |
| E | Faceplate | 1 |
| F | Strike Plate | 1 |
DOOR PREPARATION
NOTE If your door already has holes, skip stepping 4 for installation.
- Using the template over the page, mark the door, drill holes, and chisel out a mortice. Drill from both sides to avoid wood splitting.
- Prepare the door jamb – using the strike plate as a pattern, drill the latch and screw holes, and chisel out a mortice until the strike plate fits flush. To assure proper lock function, the holes in the door jamb must be drilled 28mm deep.
INSTALLATION
INSTALL THE LATCH
A) Attach the correct faceplate
B) Set the latch backset
CAUTION Be sure the latch cam is upright before making any backset adjustment.
INSTALL THE CYLINDER DEADBOLT
INSTALL THE STRIKE PLATE
Allegion (Australia) Pty Ltd
Freephone: 1800 098 094
Email: info.au@allegion.com
www.allegion.com.au
Allegion (New Zealand) Pty Ltd
Freephone: 0800 477 869
Email: nzinfo@allegion.com
www.allegion.co.nz
NZDBZBOLT1020 © 2019 Allegion