logitech G923 Racing Wheel and Pedals For PlayStation 5 Consoles Installation Guide

G923 Racing Wheel and Pedals For PlayStation 5 Consoles

G923
Racing Wheel and Pedals For PlayStation®5 consoles and PlayStation®4 consoles PlayStation®5 PlayStation®4
PlayStation®5 PlayStation®4 PlayStation®5 PlayStation®4
SETUP GUIDE

CONNECTIONS AND MOUNT POINTS

1. Mounting clamps
2. Cable management cleat
3. Optional shifter connection (DB-9 male)
4. USB cable
5. Pedal unit connection (DB-9 female)
6. Power connection
7. Bolt mounting points (uses M6X1 bolts)

OPTIMAL CABLE ROUTING

USB and pedal cables (1, 2) should be routed through inner channels Power and optional shifter cables (3, 4) should be routed through outer channels Cables may be wrapped multiple times around cable management cleat to take in slack
3 ENGLISH

INSTALLATION — PS5TM consoles, PS4TM consoles — PC

Attach power adapter and USB cables as shown Every time your racing wheel connects with your system, it will rotate fully to each side and then to the center to calibrate Your wheel will be ready once this calibration is completed For PC to enable the force feedback and RPM LED features on your G923 Wheel and Pedals, you must install the Logitech G HUB software This can be found at logitechG com/support/G923-ps

TRUEFORCE and advanced features require game integration Visit logitechG com/support/G923-ps for a complete list of supported games

MOUNTING CLAMPS

G923 Racing Wheel is equipped with a built-in clamping system for mounting to a table Push down and rotate clamp knobs to lock or unlock Rotate clamp knobs to tighten or loosen clamps
Note: Clamp extenders should be removed for attachment to thicker tables

BUTTONS

1. Steel paddle shifter
2. Directional pad
3. L2 and R2 buttons
4. L3 button*
5. +/- Setting Adjustment buttons*
6. Steel paddle shifter
7. H, J, K, L buttons
8. Share/Create button
9. R3 button*
10. 24-point selection dial and button
11. OPTIONS button
12. PS button

• Requires supported games on PS5TM consoles/PS4TM consoles Assignable in any game on PC using either in-game assignment or Logitech G HUB software

FORCE FEEDBACK

Your Racing Wheel contains dual motors that will provide force feedback with supported games and systems In supported titles, you will also experience our next generation approach to force feedback: TRUEFORCE TRUEFORCE integrates directly with game physics and audio to unlock high-definition, real-time force feedback Tire grip, suspension, weight, horsepower–even unique engine sound resonance–are immediately and accurately felt through the wheel Supported titles on PlayStation®5 consoles, PlayStation®4 consoles and

PC may implement TRUEFORCE high-definition force feedback For a list of supported titles, visit logitechG com/support/G923-ps
Note: Your Racing Wheel has an overheat protection circuit safeguard to protect it under high-temperature operating conditions In rare instances, force feedback features may shut down during use while controls continue to operate If this occurs, allow the wheel to cool down and power it down by unplugging it If this occurs frequently, contact product support

FEATURES

1. Clutch pedal

2. Brake pedal

3. Throttle pedal

4. Textured heel rest
   

5. Bolt mounting points (uses M6X1 bolts)

6. Patented carpet grip system

7. Carpet grip release clip
   Push towards rear of pedal unit to release

8. Change pedal face position (requires 2 5mm hex key)
   

USING THE DUAL CLUTCH IN-GAME

Using a dual clutch system from a grid start in a race enables you to achieve maximum traction without the need to find the bite point of your clutch pedal – this can give you a significant advantage at the start of a race
To use the dual clutch system in-game:

1. At race start, fully depress the clutch pedal and the button assigned to the dual clutch function (see next section for setting instructions)
2. Select first gear using the Gear Up Paddle and fully depress the gas pedal
3. As soon as you get the green light for race start, immediately release the Dual Clutch button The car should start moving as the bite point of the clutch is engaged
4. Smoothly release your foot from the clutch pedal in order to achieve maximum traction It’s worth practicing this last step and modifying the bite point setting several times to find a method that works for you Once you have it perfected, this feature can help make up several places on the grid

SETTING UP THE DUAL CLUTCH SYSTEM

1. Press and hold the left and right steel paddle shifters L3 and R3 buttons together for two seconds to enter dual clutch setting mode The RPM LEDs will illuminate blue and flash slowly:
   
   Note: Support for the dual clutch function is not possible in some games A list of games that support the dual clutch feature can be found at logitechG com/support/G923-ps
   Note: Whilst in the Dual Clutch setting mode, the RPM LEDs will not respond to the game/SDK

2. Press the button you want to set as the dual clutch button The only valid buttons for this are the L3 and R3 buttons The RPM LEDs will flash red to show that you’re in clutch position setting mode

3. While in your chosen simulation or game with the car still on a track, fully depress the clutch and gas pedals Engage first gear and keep pressing the minus button down until the car begins to move in-game You can adjust the precise bite point of the clutch by using the plus and minus buttons until you are happy with the setting

4. At this point, you may test the dual clutch without leaving the setting mode It is recommended you attempt a race start, stop the car and adjust the bite point and then try again until you are satisfied with the performance of the dual clutch

5. Press the Select button in the middle of the dial on the wheel to exit dual clutch setting mode The RPM LEDs will flash in a sequence from green to blue to show that the setting is saved The RPM LEDs will then go out and begin responding again to RPM output from supported games

RESETTING DUAL CLUTCH SYSTEM

Press and hold the left gear shift, right gear shift, and square button for two seconds The RPM LEDs will all flash four times and then extinguish to indicate that the Dual Clutch system has been reset The button assigned to the Dual Clutch system (L3 or R3) will revert to its normal function

USING LOGITECH G HUB

Logitech G HUB enables the following features on the G923: · Button programming with profiles that can be linked to games · Adjustment of wheel settings, such as Rotation Angle and TRUEFORCE strength · Testing of the various buttons, wheel and pedal functions

G HUB WHEEL SETTINGS

Sensitivity
Alters the output response of the wheel to be more or less sensitive Leaving this slider at 50% will provide a linear 1:1 output Between 51% and 100% will make the wheel increasingly more sensitive around the center movement of the wheel Between 0% and 49% will make the wheel decreasingly sensitive around the center movement of the wheel
Operating Range
The G923 is capable of up to 900 degrees of rotation Reducing this setting will change the point at which the wheel will reach full steering lock This is especially useful if you’re driving a car with a smaller actual steering lock angle, such as a Formula 1 or GT3 car
Centering Spring (for games without force feedback)
Most games that support force feedback already model the correct return to center function of the G923 based on the virtual car It is recommended that the Centering Spring option be turned off for these games
Enabling the Centering Spring option will allow you to override the game features and adjust the strength of the return to center force using the provided slider
Torque
Only available for TRUEFORCE supported games Torque controls the overall force feedback strength for your G923

Audio Effects
Only available for TRUEFORCE supported games Controls the overall strength of the audio-related effects (engine note, rumble strips etc ) when using TrueForcecompatible titles
If you are using your G923 in older titles that do not support TRUEFORCE, then adjustment of the force feedback can be performed from the settings menus of the game title

TESTING YOUR WHEEL AND PEDALS

On the wheel and pedals screens in G HUB, you can check every button and axis on your G923 in order to ensure everything is functioning correctly For the wheel you can also see the effect of altering the Operating range

G HUB PEDALS SETTINGS

Sensitivity
Alters the output response of the pedals to be more or less sensitive Leaving this slider at 50% will provide a linear 1:1 output Between 51% and 100% will make the pedal increasingly more sensitive around the initial movement of the pedal Between 0% and 49% will make the pedal decreasingly sensitive around the initial movement of the pedal
Combined Pedals
If checked, this will set the gas and brake pedals to become two halves of a single axis This will help the pedals operate correctly in older racing titles that do not support separate axes for pedals
Note: If left checked then the pedals will not behave correctly in modern racing titles If you find that just one of your pedals is functioning by accelerating when pressed and braking when released then you should make sure that this option is not checked

QUESTIONS?
Please visit logitechG com/support/G923-ps for more information or to get in touch with a customer representative

©2021 Logitech Logitech, Logitech G, Logi, TRUEFORCE and other Logitech marks are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries ” “, “PlayStation”, “PS5”, and “PS4″are all registered trademarks of Sony Interactive Entertainment Inc All rights reserved All other trademarks are the property of their respective owners Made in China
© 2021 GLogiLogitechLogitech GTRUEFORCE / ” “”PlayStation””PS5″”PS4″ Sony Interactive Entertainment Inc
WEB-621-001211 004

©2021 Logitech Logitech, Logitech G, Logi, TRUEFORCE Logitech Logitech Europe S A / ” “, “PlayStation”, “PS5”, “PS4”, Sony Interactive Entertainment Inc All rights reserved All rights reserved
© 2021 Logitech GLogiTRUEFORCE Logitech Europe S A / PlayStationPS5PS4 PlayStation Shapes Logo Sony Interactive Entertainment Inc

References

• Logitech Support + Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>