Aerpro CAVW01 Infodapter Instruction Manual
- June 8, 2024
- Aerpro
Table of Contents
Aerpro CAVW01 Infodapter
Specifications
-
Product Name: Infodapter
-
Compatible Vehicles: Volkswagen EOS 2009 – 2016, Golf 2008 – 2013, Multivan 2010 – 2015, Passat 2010 – 2015, Polo 2009 – 2014, Scirocco 2011 – 2015, Sharan 2010 – 2015, Tiguan 2011 – 2015,
Touran 2010 – 2015 -
Features: Display vehicle information on aftermarket head unit,use steering wheel controls with compatible head units
-
Additional Requirement: Compatible with Fender OEM Amplified System, Models with White MFD
About
The Infodapter for vehicles allows vehicle information such as climate control, parking sensors, and heated seats to be displayed on any aftermarket head unit with rear camera input. It also enables the use of steering wheel controls with almost every steering wheel control compatible head unit on the market.
CAVW01
INFODAPTER INSTRUCTION MANUAL
for select Volkswagen vehicles
Vehicle Application
- Volkswagen EOS 2009 – 2016
- Volkswagen Golf 2008 – 2013
- Volkswagen Multivan 2010 – 2015
- Volkswagen Passat* 2010 – 2015
- Volkswagen Polo 2009 – 2014
- Volkswagen Scirocco 2011 – 2015 Volkswagen Sharan 2010 – 2015
- Volkswagen Tiguan 2011 – 2015
- Volkswagen Touran 2010 – 2015
- Only for Models with White MFD
- *Compatible with Fender OEM Amplified System
ABOUT
The Infodapter for VW vehicles allows vehicle information such as climate control, parking sensors and heated seats to be displayed on any aftermarket head unit with rear camera input. The Infodapter also allows the use of the steering wheel controls with almost every steering wheel control compatible head unit on the market.
DIP SWITCH SETTINGS
See Fig 1.
Up = Off, Down = On
- On = Pioneer head units. Off = All other head units
- Setting for reverse camera. On = PAL, Off = NTSC. The default setting is Off (NTSC).
- Resets the display settings back to default. If the display settings have been manipulated in a way that it is no longer possible to make adjustments, change the DIP switch #3 from Off to On and back. This will reset the screen settings to the factory defaults. During this procedure the screen background will change to red. While the background is red, no settings can be made.
- Not applicable
INTERFACE CONNECTIONS
STEERING WHEEL
CONTROLS
- À Speech Button
- B/C Track Up/Down
CONFIGURATION MENU
To access the menu, push and hold the speech button for 2 seconds (Fig. 3). This will enable the configuration menu. To navigate through the menu options use the Track Up/Track Down buttons. To select a menu option, push the speech button once.
CONFIGURATION MENU
-
Vehicle Settings
Amplifier Settings- Driver Position – Select Left or Right depending upon vehicle configuration.
- Amplifier Settings – This setting can be used to adjust the gain of the aftermarket head unit, to match the the OEM amplifer volume. (Note this option is only available when an OEM amplifier is detected in the vehicle)
-
Preferences
Park Assist Version – Select according to the colour configuration of the park
assist fitted to the vehicle.
Camera Connected – Select Yes if an optional camera is connected.
Reverse Priority – Select which image (Camera or Park Assist) will be shown
by default when reversing. The driver can select the desired image by pushing
the Speech button (Fig.3) while reversing. (Note this option is only
available when
Camera Connected is set to Yes)
Park Brake Source – Set to one of the following: Brake – Park brake output
active when park brake is on.
Speed – Park brake output active when speed is less than 3KMH Always On – Park
brake output always active.
Restore factory settings – Reverts all Infodapter settings to factory
defaults.
(This does not restore vehicle settings)
If you need assistance setting up or using your Aerpro product now or in the
future, call Aerpro Support Australia
TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST. If you would
like to download a digital copy of this manual, or other Aerpro
manuals/software, please visit the http://aerpro.com website.
Legal Information
Please consult the relevant road traffic laws governing the country in which
this product is being operated.
No liability is accepted for material damage, loss or personal injury,
directly or indirectly, from installation and operation of this product. This
product should only be operated when safe to do so.
www.aerpro.com