kogan KAWFAD1300A AC1300 Dual-Band USB 3.0 Beamforming Wi-Fi Adapter User Guide
- June 6, 2024
- Kogan
Table of Contents
kogan KAWFAD1300A AC1300 Dual-Band USB 3.0 Beamforming Wi-Fi Adapter User
Guide
SYSTEM REQUIREMENTS
- Windows XP or above
- MAC OS X
- USB 2.0 port or above
IN THE BOX
- 1 x AC1300 Dual Band USB Adapter
- 1x USB Mini Dock
- 1 x User Guide
INSTALLATION
IMPORTANT: For proper operation, do not connect the AC1300 Dual Band Adapter
to your computer before you install the software. If you do, wait for the
Found New Hardware screen to display and click on “Cancel”; otherwise, the
installation process will likely be adversely affected.
Please download latest drivers then proceed. Driver download links are
available at Kogan.com. Once downloaded, double click the application file
“Setup”.
Wait for the installer to run. Click on “Next” to continue with the
installation.
The installer will automatically install the program. When done you will see
the picture like below, please select “Yes, I want to restart my computer now”
and click on
“Finish” to reboot your computer
With the computer now turned on, insert the AC1300 Dual Band Adapter into an
open USB port
The status screen will display, indicating that the installation is in
progress. No action is needed at this point.
When completing the Found New Hardware Wizard screen displays, it indicates
that the installation has been completed and your AC1300 Dual Band Adapter is
ready for
configuration.
CONFIGURATION
Once the installation is complete, you can configure the AC1300 Dual Band
Adapter to connect to a wireless access point (AP). The wireless configuration
utility will start
automatically and you’ll also find a tray icon at the lower right in your
Windows systems tray.
-
Click the tray icon and select the icon to open a configuration utility.
-
The configuration utility will scan for wireless networks within range. Click “Refresh” to refresh the list of available wireless networks. To join a particular network that displays, just select it and click “Add to Profile.”
-
If the wireless network uses encryption, you need to input the correct encryption key. The configuration utility automatically suggests the correct authentication type (see the drop-down list) and you should not change the suggested value.
Note: For WPA/WPA2 networks, you need to select the correct encryption type, as well (AES or TKIP).
These settings depend on how the wireless network is set up. Only the owner of the wireless network can provide the required information -
If the wireless access point is successfully connected, it will be displayed here as such.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require,
head online to help.kogan.com
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>