AFTERSHOKZ OpenMove AS660 Wireless Bone Conduction Open-Ear Bluetooth Headphones User Guide

AFTERSHOKZ OpenMove AS660 User Guide

How to Set Up OpenMove

1. Charge
   Charge the headphones with the included Type-C charging cable. The LED indicator will change from red to blue when charging is complete.

2. Pair
   Begin with your headphones powered off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.

3. Connect
   Open your device’s Bluetooth® menu and select “OpenMove by AfterShokz.” Audrey will say “connected” and the LED indicator will flash blue one time.

Let us take care of you! Protect your headphones against defects.
Make sure to register your SE at
register.aftershokz.com

Multifunction Button (A)

Volume+ / Power Button (B); Volume- Button (C)

Specifications

LED Indicator

Multipoint Pairing

Multipoint pairing allows OpenMove to be connected to two devices at once, allowing users to seamlessly transition between the two.

1. Begin with your headphones powered off.
2. Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “multipoint enabled”.
4. Open your first device’s Bluetooth® menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
7. Open your second device’s Bluetooth® menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
8. Turn your headphones off.
9. Turn your headphones on. Your headphones are now connected to both devices. Audrey says “connected” and “device 2 connected”.
10. To turn multipoint pairing off: Press and hold the multifunction button and volume- button for 3 seconds. Audrey says “multipoint disabled”.

More information: bit.ly/aftershokzpairing

How to Reset Your Headphones

1. Begin with your headphones powered off.
2. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
4. Turn your headphones off. OpenMove is now reset and can be re-paired to your device.

Optional Accessories

Earplugs (D)

Use earplugs with headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.

1. Roll earplugs firmly between fingers and place in ears.
2. To adjust EQ settings for earplugs, press and hold volume+ and volume- buttons simultaneously while music is playing. Continue through options until “earplug mode.”
3. Switch EQ to other settings when you take out the earplugs.

Manufacturer

AfterShokz LLC

3200 Gracie Kiltz Lane, 4th floor, Austin, TX 78758

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>