AFTERSHOKZ AS650 Air Bone Conduction Wireless Bluetooth Headphone User Guide

June 5, 2024
AfterShokz

How To Set Up Air

  1. Charge
    Charge the headphones with the included micro-USB cable. The LED light will turn from red to blue when charging is complete.

  2. Pair
    Start with your headphones off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED light flashes red and blue.

  3. Connect
    Open your device’s Bluetooth® menu and select “Air By AfterShokz.” Audrey says “Connected” and the LED light will flash blue one time.

Multifunction Button (A)

Function Action Prompt / “Audrey Says™
Play/pause music Click once One beep
Skip to the next song Double-click
while music is playing One beep
4nswer / end call Click once Two / One beep
4nswer call waiting and put the current caller on hold Click once to switch
between callers One beep
4nswer call waiting and ‘tang up on current caller Press and hold for 2
seconds One beep
Reject a call Press and hold for 2 seconds Two beeps
Prompt device assistant Press and hold for 2 seconds Device beep
Redial last number Double-click  ‘Last number redial”

Volume Up / Power Button (B); Volume Down Button (C)

Function Action Prompt / “Audrey Says™”
Power on Press and hold volume+ for 3 seconds. “Welcome to AfterShokz.”
Power off Press and hold volume+ for 3 seconds. “Power off”
Mute Press and hold both buttons for 2 seconds while on a call “Mute on” or

“Mute off”
Change EQ setting| Press and hold both buttons for 3 seconds while music is playing| “Equalization changed”
Check battery status| Click the volume up or down button while music is paused| “Battery high, medium, low (or) charge me”
Adjust volume| Click the volume up or down button to adjust volume| One beep

Specifications

Part number AS650 Frequency response 20Hz~20KHz
Speaker type Bone conduction transducer Sensitivity 100 ± 3dB
Bluetooth® version Bluetooth®  v4.2 Microphone -40dB ± 3dB
Wireless range 33 ft (10m) Battery Rechargeable lithium-ion
Compatible profiles A2DP, AVRCP, HSP, HFP Weight 1.06 oz (30g)
Continuous play Up to 6 Hours Standby time Up to 20 days
Charge time 2 hours Warranty 2 years
Frequency band 2400MHz~2483.5MHz Maximum output power 4dBm
Maximum Charge Voltage 5.25 V Water-resistance IP55
Battery Capacity 183 mAh

LED Indicator

Solid red Charging
Solid blue Charging complete
Flashes red and blue Pairing mode
Flashes blue Incoming call
Flashes red every 2 minutes Low battery

Multipoint Pairing

Multipoint pairing allows Air to be connected to two devices at once, allowing users to seamlessly transition between the two.

  1. Start with your headphones off.
  2. Press and hold volume+ until Audrey says “Pairing” and the LED light flashes red and blue.
  3. Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “Multipoint Enabled.”
  4. Open your first device’s Bluetooth menu and select Air by AfterShokz. Audrey says “Connected”
  5. Turn your headphones off.
  6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “Pairing” and the LED light flashes red and blue.
  7. Open your second device’s Bluetooth menu and select Air by AfterShokz. Audrey says “Connected.”
  8. Turn your headphones off.
  9. Turn your headphones on, Your headphones are now connected to both devices.
    More information: bit.ly/ASMultipoint

How To Reset Your Headphones

  1. Start with your headphones off
  2. Enter pairing mode by pressing and holding volume+ until Audrey says “Pairing” and the LED light flashes red and blue.
  3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
  4. Turn your headphones off. Air is now reset and can be re-paired to your device.

Optional Accessories

Earplugs (D)
Use headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.

  1. Roll earplugs firmly between fingers and place in the ears.
  2. To adjust EQ settings to reduce or enhance bass while wearing earplugs, press and hold volume up and down buttons simultaneously.
  3. Switch EQ to normal condition when you take out the earplugs.

Manufacturer
6057 Corporate Dr., East Syracuse, NY 13057

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

AfterShokz User Manuals

Related Manuals