AFTERSHOKZ ASC100 OpenComm Wireless Stereo Bone Conduction Bluetooth Headset Instructions
- June 6, 2024
- AfterShokz
Table of Contents
AFTERSHOKZ ASC100 OpenComm Wireless Stereo Bone Conduction Bluetooth
Headset
Storage and Maintenance
- Store the product in a cool and dry place. The working temperature should be0~45°C(32~113°F).
- Clean the product with a soft dry cloth.
Note
Design and specifications are subject to change without notice. For the most
up-to-date product information, please visit
www.aftershokz.com.
Warranty
AfterShokz LLC gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.aftershokz.com or contact the local distributor. Before putting the product into operation, please observe the respective country-specific regulations.
Hereby, AfterShokz LLC declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU Directive requirements. The complete declaration of conformity can be found at: https://aftershokz.com/pages/policies
- Frequency range (MHz) and power:
- Frequency range: 2402-2480MHz
- Maximum RF output power of the product: ＜10 dBm
Caution: Risk of explosion if the battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.
This WEEE logo (shown on the left) means that this product must not be
discarded as household waste, and should be delivered to an appropriate
collection facility for recycling. Proper disposal and recycling help protect
natural resources, human health and the environment. For more information on
the disposal and recycling of this product, contact your local municipality,
disposal service, or the shop where you bought this product.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The product complies with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>