AFTERSHOKZ Bone Conduction Wireless Headphones Instruction Manual

AFTERSHOKZ Bone Conduction Wireless Headphones

Summary of button functions

1. Power On/ Power Off/Volume up/Next song
2. Volume down/Previous song
3. Magnetic charging port
4. LED indicator
5. Multifunctional buttons: Pause/ Play/ Answer Phone Call/ End Phone Call/Voice Assistant
6. Microphone

Controls

• On: When the headphone is in power-off state, press and hold power button for 3 seconds with blue LED flickering, reminding tone: power on.

• Off: When the headphone is in power-on state, press and hold power button for 5 seconds with red LED flickering once, reminding tone: power off.

• Connect BT: When the headphone is in power-off state, press and hold it for 3 seconds to enter a pairing state with red and blue LEDs flickering and reminding tone: pairing. After the device (smart phone, tablet computer, etc.) discovers BH718, press it to connect.

• Connected successfully: When the headphone is successfully linked to the device, blue LED will flicker every 5 seconds with reminding

• tone: Connected Pause/Play: In the Bluetooth connection music playback state, click the multi-function button to pause, and then click the multi-function button to play;

• Answer/Hang up: In the incoming call state: click the multi-function touch button to answer, long press the multi-function button for 2 seconds to reject the call. In the call state, click the multi-function touch button to hang up

• Vol+: Press the Vol+ once to turn up the volume.

• Vol-: Press the Vol- once to turn down the volume. Next song: Long press “V+” for 2 seconds when music is playing

• Previous song: Long press “V-” for 2 seconds when music is playing

• Voice assistant: Keep Bluetooth link, and double-click the multi-function button to turn on the voice assistant, then double-click it again to exit.

• Enter memory mode: Keep the device power-on (no matter whether it is paired or not), long press the multi-function button for 6 seconds till the tone rings. Thus the device enters the memory play mode, the Bluetooth automatically stops, and the headset will automatically play and loop T card songs in order.

• Exit memory mode: Long press the multi-function button for 6 seconds to exit memory mode, and it will automatically enter Bluetooth pairing mode, showing
  “pairing” (in case of a connection record, it will automatically reconnect to the last device)

• Memory computer mode: Connect the headset, either power-on or power-off, to the computer with a data cable that can transmit data. When the computer displays U disk mode, copy the downloaded song to the U disk in a format of MP3

• Clear pairing information: Press the power button and the volume off button for 5 seconds to clear the pairing information in shutdown mode, Red and Blue light blinks 1 second spontaneously

• Charging: In case of using charging line for charging, connect the headphone with the USB power. During the charging, LED turns red. After charging, the LED turns blue.

Principles of bone conduction

Most of the sound we hear is the result of sound waves passing through our eardrum to make it vibrate so that the sound waves can be conducted to the internal auditory canal.
The other way is that the sound waves are directly conducted to the internal auditory canal through the vibration of the bone instead of the eardrum. This is another way
of people hearing their own sound and this sound con-duction is called bone conduction.

How to wear

Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.

Specifications

• Music play time—— 6.5 hours( 70% volume)
• Standby time—–20 days
• Charging time—-2 hoursS
• BTversion——- -==—————-| –5.3
• Speaker impedance—–80t15%
• Microphone sensitivity———–38t2db
• Product weight——–39gt1g
• Connection distance———-15 meters
• Charging voltage/current——-5V/0.5A

Attention

• Please wear the bone-conduction speakers of the headphone at your cheekbones before your ears and do not put them in your ears.
• Listening to music for an excessive long time mayake you feel uncomfortable, please try to use a medium volume instead of a big one.
• No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds.
• Please take care when using the headphone.
• Do not throw, press the headphone or put it in the water.
• The headphone should keep away from fire, water and high voltage devices.
• It is not for children’s use as it contains small parts.
• Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
• If there is any injury or property loss due to violation of the above contents, we will not bear any responsibility.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. (1) This device may not cause harmful interference, and
2. (2) this device must accept any interference received, including interference that may cause undesired operation.
   Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>