HOT-STEAM SGB600 Temperature Control Knob Instructions
- June 13, 2024
- HOT-STEAM
Table of Contents
HOT-STEAM SGB600 Temperature Control Knob
Product Information
Product: SGB SERIES GRAVITY FEED IRON
Model No.: SGB600/SGB700/SGB900
Version: 2111
Part No.: S6017 [Ref. #10] Content: 3pcs
Product Usage Instructions
- Before attempting to troubleshoot the iron, ensure the following:
- Turn off and unplug the iron from the power supply.
- Close the valve on the Water Tank.
- Disconnect the hose from the iron.
- Wait for the iron to cool down.
- To replace the temperature dial, follow these steps:
- Match the inside cut-out of the dial housing to the thermostat stem.
- Install the dial housing on the outer cover to lock it in place with the thermostat stem.
- Insert the dial screw into the dial spring and hold them together.
- Place the dial spring over the dial housing and gently tighten it with a screwdriver.
- Rotate the temperature dial to 0 and up to 5 to ensure smooth operation.
- Regulate the dial tension by loosening or tightening the screw as needed.
Temperarure Dial Replacement
- Part# S6017 [Ref. #10]
- Content: 3pcs
WARNING Before attempting to troubleshoot the iron, turn off and unplug the iron from the power supply. Close the valve on the Water Tank and disconnect the hose from the iron. Wait for the iron to cool down.
Technical Support Steps
- Match the inside cut-out of the dial housing to the thermostat stem, install it on the outer cover to lock it in place
- Insert the dial screw into the dial spring and hold keep them together
- Place over the dial housing and gently tighten with a screwdriver.
- Rotate the temperature dial to 0 and up to 5. Regulate the dial tension by loosening or tightening the screw
Copyright ©2021 Hot-Steam® All rights reserved
For additional assistance contact Hot-Steam Technical Support at
631-393-2811 or support@hot-
steam.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>