HEADRUSH HRSP 5024 Maximus Portable Bluetooth Speaker Instruction Manual
- June 6, 2024
- HeadRush
Table of Contents
WIRELESS SPEAKER
MAXIMUS
HRSP 5024
The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth ®SIG, Inc., and any use of such marks by The Source (Bell) Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.
WHAT’S INCLUDED:
- Bluetooth®speaker
- USB to the micro USB charging cable
- 3.5mm to 3.5mm audio cable
- Instruction Manual
FEATURES:
- Bluetooth ® V4.2
- Hands-free telephone calling
- TWS (True wireless stereo)
- Operating distance up to 10m (33ft.)
- Operation time up to 8 hours (medium volume level)
- 3.5mm line-in
- IPX 5 water-resistant feature
- Convenient adjustable strap
- Internal power bank for charging smartphones or other electronic devices
COMPONENT IDENTIFICATION
- MIC
- Battery indicator LED
- Status indicator LED
- Power ON/OFF
- Decrease volume/Previous track
- Play/Pause
- Increase volume/Next track
- Power bank charging port
- AUX
- Reset hole
- Micro USB
INTRODUCTION
You can use this item with any compatible, Bluetooth® -enabled device to stream music and enjoy hands-free calling. In order to get the best results when using this device, please read this manual first before using it. This unit has IPX 5 rating: Protected gainst low-pressure water jets from all directions.
OPERATION
| TO | DO THIS | LED |
|---|---|---|
| Power ON | Press and hold the C) button. | Blue LED ON. |
| Power OFF | Press and hold the C) button. | Blue LED OFF. |
| Pair | Blue LED flashes to indicate pairing mode. | |
| Disconnect | Press the + and – buttons simultaneously. | Blue LED flashes. |
| Play/Pause/Mute | Press the ► button to play, press again to resume. | |
| Next track | Press and hold the + button. | |
| Previous track | Press and hold the — button. | |
| Increase volume | Press the + button. | |
| Decrease volume | Press the — button. | |
| Answer call | Press the ► button. | |
| End call | Press the ► button. | |
| Reset | Insert the end of a paper clip into the reset hole. |
PAIRING
- Turn the speaker ON.
- Turn the Bluetooth ® ON in your device settings and select “HRSP 5024”.
- Once paired successfully, the speaker will chime and the blue LED will blink quickly.
- If you fail to pair your device or you want to pair it with a new device please repeat the steps outlined above.
NOTE: The speaker will automatically pair with previously paired devices
provided the Bluetooth®is ON and within range (10m).
When you disconnect the speaker while paired, the blue LED light will start to
blink quickly and the speaker will chime. The speaker has entered into pairing
mode. If there is no device paired within 5 minutes, the speaker will turn
OFF.
CHARGING
This speaker has a built-in rechargeable Li-Ion battery. Fully charge the
speaker before first use. Charge the battery as follows:
Use the included charging cable to fully charge the speaker before first use.
It will take approximately 2.5 hours to fully charge using a PC USB port.
- The red LED will be ON while the speaker is charging
- The green LED will turn OFF once charging is complete
NOTE: When the battery is at 10% the red LED will flash quickly, at 3% the speaker will turn OFF.
USING THE POWER BANK
- The unit has a charging out feature to support your portable devices with a backup power supply.
- Connect your portable device by its charging cable to the USB port.
- Press the button.
Green LED ON= 67-100% battery life.
Orange LED ON=34 – 66% battery life.
Red LED ON=less than 33% battery life.
The charging current is 2.1A max
HANDS-FREE SPEAKERPHONE
When a smartphone is connected to your speaker follow the steps below to take calls hands-free.
- If there is an incoming call while streaming music, the speaker will beep to notify you.
- Press ►the button to pick up the call; press the ►button again to hang up the call.
- Press and hold the ►button for one second to reject the call.
- To return a call, press and hold the ►button.
LINE-IN
- Use the supplied 3.5mm cable to connect the speaker directly to your device.
The Bluetooth ® will disconnect and the speaker will play music from LINE-IN. The green LED will be ON when playing music using line-in.
TWS (TRUE WIRELESS STEREO) CONNECTION
Connect two HR Maximus speakers for a true wireless stereo experience. To connect:
-
Turn the Bluetooth ® feature on your smartphone OFF and ensure neither speaker is connected to any device via Bluetooth
®. -
Turn both speakers ON and place them within 7m (22.9ft) of each other. Press the button on one of the speakers twice the LED will flash blue and green and they will pair automatically. After successful pairing, the blue LED on the main speaker will flash slowly and the blue LED on the second speaker will turn ON.
-
Turn the Bluetooth® ON in your device settings and select “HRSP 5024”. After pairing to your phone, both blue LEDs will stay ON.
-
To disconnect, press and hold the button.
TECHNICAL SPECIFICATIONS
| Carrier Frequency: | Bluetooth® 4.2 |
|---|---|
| Battery capacity : | 7.2V, 2000mAh |
| Frequency Response: | 65Hz-20kHz |
| Operation Distance: | Up to 10m (33ft.) |
| Output Power: | 2 x 10W |
| Impedance: | 8 Ohms |
| Charging time: | 2.5 hours |
| Playback time: | 8 hours |
NOTE: This speaker is in compliance with the specified Bluetooth ® version. It does not guarantee compatibility with all the functions on every Bluetooth ® -enabled device. Please check your mobile phone’s user manual for compatibility and functionality.
TROUBLESHOOTING
No Sound:
- Ensure the speaker is charged and has enough battery power for operation
- Ensure the speaker is switched ON
- Ensure Bluetooth ®device is ON
- The volume of the speaker is too low, adjust the volume to an appropriate level
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
THE FCC WANTS YOU TO KNOW
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
INDUSTRY CANADA NOTICE
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
IC: 255A-8084182
Documents / Resources
|
HEADRUSH HRSP 5024 Maximus Portable Bluetooth
Speaker
[pdf] Instruction Manual
HRSP 5024, Maximus Portable Bluetooth Speaker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>