HYTRONIK HBIR29 PIR Standalone Motion Sensor Instruction Manual

HBIR29
Installation and Instruction Manual
PIR Standalone Motion Sensor with 5.0 SIG Mesh
One DALI Channel Output

Technical Specifications

Sensor](https://manuals.plus/wp-content/uploads/2021/12/HYTRONIK-HBIR29-PIR- Standalone-Motion-Sensor-Motion-Sensor-300x74.png)5.0 SIG Mesh
Stand-by power| <1W
Operating voltage| 220~240VAC  50/60Hz
Switched power| 20s
Warming-up| Max. 40 devices, 80mA
Sensor principle| PIR detection
Detection range (Max.)
HBIR29| Installation Height : 5m
Detection Range (Ø) :10m @ 3m height
Detection range (Max.)
HBIR29/H| Installation height ：15m (forklift)
12m (person)
Detection range (Ø) ：20m
Detection angle| 360 °
Operation temperature| Ta:-20° C~+50° C
IP rating| IP20
EMC standard (EMC)| EN55015, EN61000, EN61547
Safety standard (LVD)| EN60669-1/-2-1
AS/NZS60669-1/-2-1
RED| EN300328, EN301489-1/-17
Certification| CB, CE , EMC, RED, RCM

Download the App

Free App for set-up and commissioning

Dimming Interface Operation Notes Switch-Dim

The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.

Switch Function

| Action|

Descriptions

---|---|---
Push switch| Short press (<1 second)

• Short press has to be longer than  0.1s, or it will be invalid.| – Turn on/off
  – Recall a scene
  – Turn on only
  – Exit manual mode
  – Turn off only
  – Do nothing

Double push

| – Turn on only
– Exit manual mode
– Turn off only
– Do nothing
– Recall a scene

Long press (1 second)

| – Dimming
– Colour tuning
– Do nothing
Simulate sensor|

/

| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Installation

Mechanical Structure & Dimensions

1. Ceiling (drill hole φ66~68mm)
2. Carefully prise off the cable clamps.
3. Make connections to the pluggable terminal blocks.
4. Insert plug connectors and secure using the provided cable clamps, then clip terminal covers to the base.
5. Fit detection blind (if required) and desired lens.
6. Clip fascia to body.
7. Bend back springs and insert into ceiling.

Wiring Diagram

Wire Preparation

Detection Range

HBIR29

Lens| Max. Detection|

With Blind A

|

With Blind B

---|---|---|---
Convex
| Height: 3m
Max. range (0):10m| Height: 3m
Max. range (0): 5m| Height: 3m
Max. range (0): 8m
Flat
| Height 3m
Max. range (0): 9m| Height 3m
Max. range (0): 4.5m| Height: 3m
Max. range (0): 7m
| | Installation height| 15m (forklift)
---|---|---|---
12m (person)
Detection range (0)| 20m

Additional Information / Documents

1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product FunctionsInstallation
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
3. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

WWW.HYTRONIK.COM
Subject to change without notice.
HBIR29-20200316-A0

References

• Catalogue_Hytronik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>