HYTRONIK HCD405-BT Motion Sensor Instruction Manual
- October 30, 2023
- HYTRONIK
Table of Contents
HYTRONIK HCD405-BT Motion Sensor Instruction Manual
Product Description
HCD405/BT is a Bluetooth built-in microwave sensor with 30mA DALI power supply built in. It is designed for professional lighting manufactures who would like to incorporate wireless control into their luminaires. It is suitable for any typical indoor applications such as office, classroom, car park, warehouse and other commercial/industrial areas. With Bluetooth wireless mesh networking, it makes communication much easier without any hardwiring, which eventually adds values to luminaires and saves costs for projects. Meanwhile, simple device setup and commissioning can be done via app.
App Features
Quick setup mode & advanced setup mode
Floorplan feature to simplify project planning
Web app/platform for dedicated project management
Koolmesh Pro iPad version for on-site configuration
Grouping luminaires via mesh network
Scenes
Detailed motion sensor settings
Dusk/Dawn photocell (Twilight function)
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Staircase function (primary & secondary)
Compatible with EnOcean BLE switches
Internet-of-Things (IoT) featured
Device firmware update over-the-air (OTA)
Device social relations check
Bulk commissioning (copy and paste settings)
Offiine commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Continuous development in progress…
Hardware Features
Photocell Advance
DALI Dimmable with 30mA DALI broadcast output for up to 15 LED drivers
Plug’n’Play for fiexible installation and cost saving assemble
Support to control DT8 LED drivers
Zero crossing detection circuit reduces in-rush current and prolongs relay
life
5-year warranty
Smartphone app for both iOS & Android platform
Koolmesh Pro app for iPad
Web app/platform: www.iot.koolmesh.com
www.iot.koolmesh.com
Technical Specifications
Bluetooth Transceiver
Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical indoor)| 10~30m
Protocol| 5.0 SIG Mesh
Sensor Data
Sensor principle| High Frequency (microwave)
Operation frequency| 5.8GHz+/-75MHz
Transmission power| ＜0.2mW
Detection range(Max.)| Max installation height: 6m
Max detection range：10m (diameter
Detection angle| 30°~150°
Input & Output Characteristics
Operating voltage| 220~240VAC 50/60Hz
Stand-by power| <1W
Load ratings:| 30mA (max. 15 devices)
Warming-up| 20s
Safety & EMC
EMC standard (EMC)| EN55015, EN61000, EN61547
Safety standard (LVD)| EN60669-1, EN60669-2-1
RED| EN300328, EN301489-1/-17
Certication| Semko, CB, CE , EMC, RED, RCM
Environment
Operation temperature| Ta: -20 O C ~ +55 O C
Case temperature (Max.)| Tc: +75 O
C
IP rating| IP20
***** The detection range is heavily infiuenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.
Mechanical Structure & Dimensions
**Wire Preparation
**
To make or release the wire from the terminal, use a screwdriver to push down the button.
- 200 metres (total) max. for 1mm² CSA (Ta = 50℃)
- 300 metres (total) max. for 1.5mm² CSA (Ta = 50℃)
Wiring Diagram
Detection Pattern
Additional Information / Documents
-
For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to
www.hytronik.com/download ->knowledge ->Introduction of Photocell Advance -
To learn more about detailed product features/functions, please refer to
www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions -
Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation -
Regarding precautions for microwave sensor installation and operation, please kindly refer to
www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation -
Data sheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors -
Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>