FUFU GAGA KF020321-01 Vanity Dressing Table

Instruction

IMPORTANT INFORMATION!
please read the entire manual before starting to assemble and/or using this product. follow the manual thoroughly and keep it for further reference.

AVOID SCRATCHES!
In order to avoid scratching this furniture should be assembled on a soft layer-could be a rug.

IMPROVE EFFICIENCY !
Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.

ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fit your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.

IMPORTANT !
It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months – in order to assure stability through-out the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.

TOOLS REQUIRED

ASSEMBLY INSTRUCTION

Insert quickfit screw(A) into corresponding holes in plate #11 with a screwdriver as shown.
Connect two plate #12 with plate #11 using wooden dowel(E), put cam lock(B) into plate #12 and turn clockwise to tighten as shown.

Fix slide rail(CL) and (CR) to plate #9 and #10 respectively using screw(K) as shown.
Insert quickfit screw(A) into plate #9 and #10 with a screwdriver as shown.

Connect plate #9 and #10 with plate #18 using wooden dowel(E), put cam lock(B) into plate #18 and turn clockwise to tighten as shown.

Connect the two components(assembled in step 2 and 4) with wooden dowel(E), then fix with screw(L) as shown.

Insert quickfit screw(A) into corresponding holes in plate #7 and #8 with a screwdriver as shown.

Connect the component (assembled in step 5) with plate #8 using wooden dowel(E) at first.
Put cam lock(B) into plate #11 and #12, turn clockwise to tighten as shown.

Connect plate #7 with the component using wooden dowel(E), put cam lock(B) into plate #11 and #12, turn clockwise to tighten as shown.

Connect two plate #34 with plank #35 at first.
Slide plate #33 and #34 into available grooves as shown.

Insert quickfit screw(A) into corresponding holes in both sides of plate #4 and #5 as shown.

Connect two plate #13 with plate #5 using wooden dowel(E), put cam lock(B) into plate #13, turn clockwise to tighten as shown.
Slide plate #32 into available grooves at first.
Attach plate #4 to two plate #13 with wooden dowel(E), put cam lock(B) into plate #13 and turn clockwise to tighten as shown.

Insert quickfit screw(A) into corresponding holes in plate #2 and #3 as shown.

Attach four plate #14 to plate #4 and #5 respectively with wooden dowel(E), put cam lock(B) into plate #14 and turn clockwise to tighten as shown.

Attach plate #2 and #3 to plate #14 respectively with wooden dowel(E), put cam lock(B) into plate #14 and turn clockwise to tighten as shown.

Connect two plate #31 with plank #35 at first.
Slide plate #31 into available grooves as shown.
Insert quickfit screw(A) into corresponding holes in plate #1 as shown.

Cover plate #1 to the top of the component with wooden dowel(E), put cam lock(B) into plate #2,#4,#5,#3, and turn clockwise to tighten as shown.

Slide plate #30 and #32 into available grooves at first.
Insert quickfit screw(A) into corresponding holes in plate #6 as shown.

Cover plate #6 to the bottom of the component with wooden dowel(E), and fix using screw(L) as shown.

Fix slide rail(CL) to plate #17 with screw(K) as shown. Fix slide rail(CR) to another side of plate #17 with screw(K) as shown.
Attach plate #17 to plate #6 with wooden dowel(E), put cam lock(B) into plate

17 and turn clockwise to tighten as shown.

Fix part(T) to plate #1 with screw(M) as shown.

Connect the two components (assembled in step 9 and 24) with wooden dowel(E), put cam lock(B) into plate #7,#9,#10,#8, and turn clockwise to tighten as shown.
Fix plate #17 with plate #18 using screw(L) as shown. Requires more than two people to assemble.

Reinforce back plate using part(R) with screw(Q) as shown.

Insert part(N) into corresponding holes in plate #4,#5,#7,#9,#10 and #8, then place plate #15 and #16 in as shown.

Insert quickfit screw(A) into plate #28 and #29,fix knob(F) with screw(H) as shown.
Connect plate #25 and #26 with plate #24 using screw(L) as shown.
Slide plate #27 into available slots at first.
Attach plate #28 and #29 respec-tively to the drawer component, put cam lock(B) into plate #25 and #26 and turn clockwise to tighten as shown.

Fix runner(DL) and (DR) to plate #25 and #26 with screw(K) as shown.

Slide drawers into corresponding positions.

Fix hinge(S) to plate #19 and #20 using screw(J) as shown.
Fix handle(G) to plate #19 and #20 using screw(H) as shown.

Fix hinge(S) to plate #21, #22 and #23 using screw(J) as shown.

Fix handle(G) to plate #21,#22 and #23 using screw(H) as shown.
Fix door plate #21 to plate #7 and #8; door plate 22 to plate #9; door plate 23 to plate #10 by fixing hinge with screw(J) as shown.

Fix door plate #19 to plate #2 and #3; door plate 20 to plate #4 and #5 by fixing hinge with screw(J) as shown.

If there is misalignment after you install, adjust the screw to the best condition

Drill holes on your wall, and install anti-tipping device as shown.

WARRANTY

WARRANTY CLAIMS

• There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
• Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
• The product must be used in accordance with the instructions provided. For health reasons.
• For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.

Type of Warranty Claim

• Failure to follow the furniture instructions will invalidate the warranty. Attention please.
• Does not include damage during installation, but includes damage during transportation.

Scope of responsibility

• Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
• After using, the damage and scratches of the furniture are not covered by the warranty.

The Warranty Relates to All Bought in The Us and Covers The Following Areas

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

RETURNS

CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:

• If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.

DEFECTIVE ITEMS

• If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.

DAMAGED ITEMS

• If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
  In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardies your chances of making a claim, and you may not receive a credit for the return.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>