HYTRONIK HBTD8200SF Bluetooth Dimmer User Manual

HYTRONIK HBTD8200SF Bluetooth Dimmer

Built-in Receiver Nodes with  5.0 SIG Mesh

HBTD8200S/F Relay Control| HBTD8200T/F Trailing Edge| HBTD8200V/F 0/1-10V| HBTD8200D/F DALI Product Description

SYMBOLS

Product Description

HBTD8200/F series are designed as Bluetooth built-in receiver node. They can be used alongside our Bluetooth motion sensor range as Bluetooth receiver nodes. Or, they can also be used solely as Bluetooth control unit for each luminaire. Whether for home use, commercial or industrial applications, HBTD8200/F series does it all.
Simple device setup and commissioning can be done via app.

App Features

Floorplan feature to simplify project planning
Grouping luminaires via mesh network
Scenes
Push switch configuration
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Device firmware update over-the-air (OTA)
Power-on status (memory against power loss)
Offline commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean BLE switches
Continuous development in progress…

• Certain scenes which require external photocell can be achieved by using together with Hytronik Bluetooth sensors, such as HBIR29, HCD038/BT + sensor head etc.

Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)

Hardware Features

HBTD8200S/F: ON/OFF control with load ratings: 400VA (capacitive) & 800W (resistive)
HBTD8200T/F: Trailing edge output – 150VA (capacitive)
HBTD8200V/F: 1-10V output: 400VA (capacitive) & 800W (resistive) with relay control
HBTD8200D/F:   100mA DALI broadcast output for up to 50 LED drivers
Compact design with two screw holes to be built inside luminaires
2 Push inputs for flexible manual control
Zero crossing detection circuit to reduce in-rush current and prolong relay lifetime (HBTD8200S/F and HBTD8200V/F)
Short-circuit protection
Overload protection
5-year warranty

**** 5.0 SIG mesh

| |
---|---|---
Smartphone app for both iOS & Android platform
|
Koolmesh Pro app for iPad
|
Web app/platform: www.iot.koolmesh.com

Technical Specifications

Bluetooth Transceiver

Operation frequency| 2.4 GHz – 2.483 GHz
Transmission power| 4 dBm
Range (Typical indoor)| 10~30m
Protocol| 5.0 SIG Mesh
Environment
Operation temperature| Ta: -20°C ~ +45°C
Case temperature (Max.)|
HBTD8200S/F| Tc: +75°C
HBTD8200T/F| Tc: +80°C
HBTD8200V/F| Tc: +75°C
HBTD8200D/F| Tc: +75°C
Storage temperature| -20°C ~ 60°C
Relative humidity| 20 ~ 90%
IP rating| IP20
Insulation| Class II
Input & Output Characteristics
Operating voltage: HBTD8200S/F HBTD8200T/F
HBTD8200V/F HBTD8200D/F| 220~240VAC 50Hz
230VAC 50Hz
220~240VAC 50Hz
220~240VAC 50/60Hz
Stand-by power| <0.5W
Load ratings|
HBTD8200S/F| 400VA(capacitive), 800W(resistive)
HBTD8200T/F| 150VA(capacitive), 150W(resistive)
HBTD8200V/F| 400VA(capacitive), 800W(resistive)
HBTD8200D/F| 100mA,16VDC(max. 50 devices)
Safety & EMC
EMC standard (EMC)| EN55015, EN61547, EN62479, EN61000
Safety standard (LVD)| IEC/EN 61058, AS/NZS 61058
Radio Equipment (RED)| EN300 328, EN301489-1/-17, EN62479
Certification| Semko, CB, CE , EMC, RED, RCM

Mechanical Structure & Dimensions

HBTD8200D/F – DALI Version

HBTD8200V/F – 1-10V Version

HBTD8200T/F – Trailing Edge Version

HBTD8200S/F – On/off Version

Wire Preparation

To make or release the wire from the terminal, use a screwdriver to push down the button.

1. 200 metres (total) max. for 1mm² CSA (Ta = 50℃)
2. 300 metres (total) max. for 1.5mm² CSA (Ta = 50℃)

Wiring Diagram

DALI Version HBTD8200D/F

1-10V Version HBTD8200V/F

Trailing Edge Version (150VA) HBTD8200T/F

On/off Version HBTD8200S/F

Dimming Interface Operation Notes

Switch-Dim

The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.

• Turn on/off
• Recall a scene
• Turn on only
• Exit manual mode
• Turn off only
• Do nothing

Double push|

• Turn on only
• Exit manual mode
• Turn off only
• Do nothing
• Recall a scene

Long press (≥1 second)|

• Dimming
• Colour tuning
• Do nothing

Simulate sensor| /|

• Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information / Documents

1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
3. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download->knowledge->Hytronik Standard Guarantee Policy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>