HYTRONIK HBTD8200PDC Bluetooth Controller with 4 SELV Push Switch Owner’s Manual
- October 30, 2023
- HYTRONIK
Table of Contents
HBTD8200PDC Bluetooth Controller with 4 SELV Push Switch
Product Information
The HBTD8200PDC and HBTD8200PDC/F are Bluetooth controllers with four SELV push switch inputs. These controllers allow for on/off control, dimming control, color tuning, and even scene recall through Bluetooth control. They are designed to fit into a junction box or electrical box and can be used for new build or retro-fit projects to add intelligent control to standard lighting fixtures. The device can be set up and commissioned via an app that offers features such as floorplan feature to simplify project planning, grouping luminaires via mesh network, scenes push switch configuration, DSchedule to run scenes based on time and date, astro timer (sunrise and sunset), device firmware update over-the-air (OTA), power-on status (memory against power loss), offline commissioning, different permission levels via authority management, network sharing via QR code or keycode, remote control via gateway support HBGW01, interoperability with Hytronik Bluetooth product portfolio, and compatibility with EnOcean BLE switches. The device comes with a 5-year warranty. Certain scenes that require an external photocell can be achieved by using the device together with Hytronik Bluetooth sensors, such as HBIR29, HCD038/BT + sensor head, etc. The device fully supports EnOcean self- powered switch module PTM215B (HBES01/W & HBES01/B).
Product Usage Instructions:
- Install the HBTD8200PDC or HBTD8200PDC/F into a junction box or electrical box.
- Download the app for iOS or Android.
- Set up and commission the device via the app.
- Use the app features such as floorplan feature to simplify project planning, grouping luminaires via mesh network, scenes push switch configuration, DSchedule to run scenes based on time and date, astro timer (sunrise and sunset), device firmware update over-the-air (OTA), power-on status (memory against power loss), offline commissioning, different permission levels via authority management, network sharing via QR code or keycode, remote control via gateway support HBGW01, interoperability with Hytronik Bluetooth product portfolio, and compatibility with EnOcean BLE switches.
- To achieve certain scenes that require an external photocell, use the device together with Hytronik Bluetooth sensors such as HBIR29, HCD038/BT + sensor head, etc.
- The device fully supports EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B).
Product Description
HBTD8200PDC & HBTD8200PDC/F have 4 SELV Push input, the control signal is sent
by Bluetooth to achieve on/off control, dimming control, colour tuning and
even scene recall. It is designed to fit into a junction box or electrical
box. Whether used for new build or retro fit projects to add intelligent
control to standard lighting fixtures, HBTD8200PDC &
HBTD8200PDC/F does it all. Simple device setup and commissioning can be done
via app.
App Features
Floorplan feature to simplify project planning
Grouping luminaires via mesh network
Scenes
Push switch configuration
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Device firmware update over-the-air (OTA)
Power-on status (memory against power loss)
Offline commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean BLE switches
Continuous development in progress…
Hardware Features
Compact design
4 SELV Push switch inputs
5-year warranty
Certain scenes which require external photocell can be achieved by using together with Hytronik Bluetooth sensors, such as HBIR29, HCD038/BT + sensor head etc.
Technical Specifications
Bluetooth Transceiver
Operation frequency 2.4 GHz – 2.483 GHz
Transmission power 4 dBm
Range (Typical indoor) 10~30m
Protocol 5.0 SIG Mesh
Environment
Operation temperature| Ta: -20°C ~ +50°C
Case temperature (Max.)| Tc: +75°C
Storage temperature| -40°C ~ +70°C
Relative humidity| 10 ~ 90%
IP rating| IP20
Insulation| Class II
Input & Output Characteristics
Operating voltage| 12 – 48VDC
Stand-by power|
Safety & EMC
EMC standard (EMC)| EN55015, EN61547
Safety standard (LVD)| EN 61347-1,EN 61347-2-11, EN62493
| EN300328, EN301489-1
EN301489-17, EN50663
Certification| CE , UKCA, RCM
Mechanical Structure & Dimensions
Wiring Diagram
Wire Preparation
To make or release the wire from the terminal, use a screwdriver to push down the button.
- 200 metres (total) max. for 1mm² CSA (Ta = 50℃)
- 300 metres (total) max. for 1.5mm² CSA (Ta = 50℃)
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches. Detailed Push
switch configurations can be set on Koolmesh app.
| Switch Function | Action | Descriptions |
|---|---|---|
| Push switch | Short press (<1 second) |
Short press has to be longer than 0.1s, or it will be invalid.
|
- Turn on/off
- Turn on only
- Turn off only
|
- Recall a scene
- Quit manual mode
- Do nothing
Double push|
- Turn on only
- Turn off only
- Recall a scene
|
- Quit manual mode
- Do nothing
Long press (≥1 second)|
- Dimming
- Colour tuning
- Do nothing
Sensor-link (VFC signal only)| /| Upgrade a normal on/off motion sensor
to a Bluetooth controlled motion sensor
Emergency Self-Test Function| Short press (<1 second)
Short press has to be longer than 0.1s, or it will be invalid.
|
- Start Self test (Monthly)
- Stop Self test
|
- Start Self test (Annually)
- Invalid
Long press (≥1 second)|
- Start Self test (Monthly)
- Stop Self test
|
- Start Self test (Annually)
- Invalid
Fire Alarm (VFC signal only)| Refer to| App User Manual V2.1|
- Able to connect the Fire Alarm system
- Once the fre alarm system is triggered, all the luminaries controlled by the Push Switch will enter the preset scene (normally it’s full on), after the fre alarm system gives the ending signal, all the luminaries controlled by this Push Switch will revert back to normal status.
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Dimmers
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>