SIGNOST2 Body Composition Scale Instruction Manual
- June 13, 2024
- SIGNOS
Table of Contents
T2 Body Composition Scale
Instruction Manual
Dear users：
Hello! Thank you for using our electronic scale series products. In order to
make it easier for you to understand the functions and characteristics of this
product, please read this instructions carefully before using it. ( The
appearance and functional configuration are subject to the physical object)
Product specifications
- Maximum weight 183 kg
- Minimum index value 4 Kg
Electric pool.
Use 4 No. 7 AAA batteries
Please pay attention to the correct installation of positive and negative
electrodes to avoid using in humid environments. Remove the battery insulator
during the first use.
Turn on.
This product adopts gravity induction power-on mode. Stand lightly on the
scale, and you can automatically turnip on and weigh it.
There is no operation for about 10 seconds after lowering the scale, and the
scale will automatically shut down.
Note: Please lay flat when not in use. Do not place item son the scale to
avoid starting up and losing power.
Screen prompt symbol Overload prompt
When “Err” is displayed on the screen, it means that the weight is overloaded.
Please lower the scale to prevent damage to the product. Low power prompt
When “Lo” is displayed on the screen, it indicates that the battery is too
low. Please replace the battery in time.
Suggestions for use and maintenance
☆ Please pay attention to keeping the glass dry to prevent oily or water-
based objects from causing wet slippery falls.
☆ When weighing, keep the center of gravity perpendicular to the scale
surface and keep it static.
☆ This product is a precision instrument. Please do not hit, hit or drop the
product to avoid accidents.
☆ Please use a slightly wet towel when cleaning to avoidwater droplets from
penetrating into electronic devices Do not use chemical cleaners to avoid
damaging the product.
☆ * Place the product horizontally, do not put it vertically. Lf it is not
used for a long time, please unplug the battery
Frequently asked questions and answers
1.It won't turn on normally, and the screen is not displayed
When the scale does not turn on normally, unplug the battery and check whether the battery is properly installed at the positive and negative electrodes. lf the problem is no solved, please replace the new battery and try again
2.There is a significant deviation between the display data and the weight value
Please check whether the machine is placed on a flat, horizontal floor. Without touching the wall.
3.Why are the weighing values different twice in a row?
The electronic scale is a precision instrument that works by sensing gravity through four sensors. The standing position and state will affect the numerical fluctuation. The error range value of EKS household electronic scale is plus or minus 300g. Please refer to whether the weighing value is within the error range, and a slight deviation is normal.
4.Why is there no fat data?
5.Whether WI FL is supported, and operation This name supports two communication modes:
Bluetooth and wifi. The support wifi is 2.4-2.48G. lt is said that it communicates with the server through WI FL. The uploaded server data includes: device mac, weight, impedance, heart rate/mac, weight; Before using wifi to communicate with the server, you need to use the app for network distribution operation, and the network distribution operation matrix reference apian the weighing process, certain conditions are met, wifi connection will be carried out, and communication with the server will be established under certain conditions
Thank you. Have a pleasant life
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>