HYTRONIK HED6045-BT Bluetooth LED Driver Instruction Manual
- October 30, 2023
- HYTRONIK
Table of Contents
- HED6045-BT Bluetooth LED Driver
- LED Drivers with 5.0 SIG Mesh
- Product Description
- App Features
- Hardware Features.
- Output Configuration
- Technical Specifications
- Mechanical Structure & Dimensions
- Wire Preparation
- Wiring Diagram
- Loading and In-rush Current
- Circuit Breaker Information
- Performance Characteristics
- Dimming Characteristics
- Dimming Interface Operation Notes
- Additional Information / Documents
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HED6045-BT Bluetooth LED Driver
LED Drivers with 5.0 SIG Mesh
HED6045/BT
Dimmable Driver & Constant Current
Product Description
HED6045/BT is a Bluetooth dimmable LED driver, with maximum power
output of 45W. It comes with Switch-Dim interface by using Push switch
(retractive switch) and of course Bluetooth dimming interface. It is ideal for
direct projects or new luminaires design for lighting manufacturers. With
Bluetooth wireless mesh networking, it makes communication between
luminaires much easier without time-consuming hardwiring, which eventually
saves costs for projects. Meanwhile, simple device setup and commissioning
can be done via Koolmesh app
App Features
Quick setup mode & advanced sefup mode
Floorplan feature to simplify project planning
Web app/ platform for dedicated project management
Koolmesh Pro Pad version for onsite configuration
Grouping luminaires via mesh network
Scenes.
Detailed motion sensor sefings
Push switch configuration
Schedule fo run scenes based on fime and de
Asto timer [sunrise and sunse)
Siacase function [primary & secondary)
Internet of Things (iT) featured
Device firmware update overtheir (OTA)
Device social relations check
Buk commissioning (copy and past seffings)
Power on status (memory against power loss)
Ofline commissioning
Different permission levels via authority management
Network sharing via GR code or keycode
Remote control via gateway support HEGWO1
Interoperability with Hytorik Bluetooth product portfolio
Compatible with En Ocean switch HBESO1/W & HBESO1/1
Continuous development in progress.
Hardware Features.
Switch Dim
2 Flicker free (1100)
Bluetooth dimmable terminal cover with cord resilient
Active PFC design
Logarithmic Dimming
Linear Dimming
| Configurable constant current (CC) output via DIP switch
Loop in and loop out terminals for efficient installation
Open circuit Profession
Short circuit Protection
Z] Overload Protection
55 Sear warranty, designed for long lfetine
upto 50,000 hours
- Certain scenes which require external photocell can
be achieved by using together with Hytronik Bluetooth
sensors,such as HBIR29, HCD038/BT + sensor head etc.
Output Configuration
Warning: Please make sure the correct current is selected before starting the driver!
Technical Specifications
Mechanical Structure & Dimensions
Wire Preparation
To make or release the wire from the terminal, use a
screwdriver to push down the button.
Wiring Diagram
Note: There is no need for any hard wirings on “push” terminal between one driver to another. The installer only needs to connect the push switches to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.
Loading and In-rush Current
| Model | HED6045/BT |
|---|---|
| In-rush Current (Imax.) | 17.8A |
| Pulse Time | 72 s |
Circuit Breaker Information
| Automatic circuit breaker type | B16A | B10A | B13A | B20A | B25A |
|---|---|---|---|---|---|
| HED6045/BT | 43 | 27 | 35 | 54 | 67 |
The data above is calculated according to the formula: Maximum Amount =
16/(Pn/230). In order to provide a more reliable
reference in real application, the data have been revised to take 60% of the
number calculated, i.e. 16/(Pn/230) x 60%.
Please kindly take note that the calculation is based on ABB circuit breaker
series S200. Actual values may differ due to different
types of circuit breaker used and installation environment.
Performance Characteristics
Dimming Characteristics
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using
commercially available non-latching (momentary) wall switches. Up
to 64 LED drivers maybe connected to one switch. Detailed Push switch
congurations can be set on Koolmesh app.
Additional Information / Documents
1. Regarding precautions for LED driver installation and operation, please kindly refer to
www.hytronik.com/download ->knowledge ->LED Drivers – Precautions for Product Installation and Operation
2. To learn more about detailed product features/functions, please refer to
www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Drivers
5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy Subject to change without notice. Edition: