nedis HPBT2052WT Fully Wireless Earphones User Guide

: June 6, 2024
: nedis

Table of Contents

Intended use
Main parts
Safety instructions
Pairing the earphones to a Bluetooth audio source
Charging the product
Making phone calls
Controlling the music
Using voice assistant
Specifications
Declaration of Conformity
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis HPBT2052WT Fully Wireless Earphones User Guide

Intended use

The Nedis HPBT2052WT is a pair of fully wireless earphones.

The product can be paired with any Bluetooth enabled audio/ video device.

The earphones can be charged up to 4 times in the fully charged case.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts

Lid
Micro USB port
Right earphone slot
Charging indicator LED
Left earphone touch control
Status indicator LED
Microphone
Left earphone slot
Micro USB cable
Right earphone touch control

Safety instructions

WARNING

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not expose the product to direct sunlight, naked flames or heat.
Do not expose the product to water or moisture.
Do not drop the product and avoid bumping.
Do not open the product.
Keep the product out of reach from children.
This product is not a toy. Never allow children or pets to play with this product.
Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
Charge the battery for at least 2 hours when you use it for the first time.
Only use the provided USB charging cable.
Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
Do not short circuit.
Do not repair the product. If damaged, it must be properly disposed of.

Pairing the earphones to a Bluetooth audio source

Take the earphones out of the charging case. The earphones switch on automatically.
Tap and hold both earphone touch controls 2 seconds to manually switch on the earphones.
One of the status indicator LED blinks red and blue to indicate pairing mode is active.
Enable Bluetooth on the device you want to pair the earphones with.
Select “HPBT2052WT” from the list of available Bluetooth devices on your device.

Charging the product

Plug the Micro USB cable into the Micro USB port of the charging case.
Plug the other end of into a computer or power adapter.
Plug the power adapter into a power outlet.
The charging indicator LED indicates the charging progress of the battery.
Place the earphones into the respective slots and close the lid to charge the earphones.
The status indicator LED on the earphones lights up red.
switches off when the earphones are fully charged.
The earphones and the charging case can charge simultaneously

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

To answer an incoming call, tap or .
To reject an incoming call, tap and hold or for 2 seconds.
To end a call, tap or .

Controlling the music

Tap or to play or pause the music.
Double tap to skip to the next track.
Double tap to skip to the previous track.

Using voice assistant

Tap and hold or for 3 seconds to activate Siri/Google Assistant.

Specifications

Product	Fully Wireless Earphones
Article number	HPBT2052WT
Power input	5VDC/03 A
Bluetooth• version	5.0
Bluetooth• frequency range	2402 – 2480 MHz
Frequency response	20 – 20,000 Hz
Max. radio transmit power	4 dBm
Impedance	160
Driver size	10mm
Voice control	Sin, Google Assistant
Battery type	Lithium-Polymer (earphones)

Lithium- Polymer (charging case)

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT2052WT from our brand Nedis® , produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/hpbt2052wt#support