TAKSTAR V1 Wireless Lavalier Video Microphone User Manual

TAKSTAR V1 Wireless Lavalier Video Microphone User Manual

Preface

Dear Customer,
Thank you for purchasing Takstar V1 Wireless Lavalier Video Microphone. In order to better understand and use the product, please read this manual carefully.
If you have any questions or suggestions, please contact our local dealer.

Features

• Tailored for live broadcast, vlog, recording and interview, suitable for camera, DSLR and smartphone thanks to its compact size.
• 2.4G band for transmission up to 50m in open area.
• Built-in high-sensitivity condenser mic with intelligent noise cancellation for clear HiFi recording.
• Use the transmitter directly by clipping it onto collar, or connect it with an external lavalier mic.
• One-key pairing, automatic sync within 2s after powering up, easy to operate.
• Adjustable output volume suits various recording equipment and prevents distortion.
• Automatic idle shutdown if without connection for around 8min, energy-conserving.
• Lithium-polymer battery inside lasts for up to 5hrs.
• Comes with a high-grade travel case for easy carrying outdoors.

Applications

Live broadcast, vlog, recording, interview

Package Contents

Single Channel Version

Transmitter…………………………………………………………………1pc
Receiver……………………………………………………………………1pc
Charging Cable……………………………………………………………1pc
Audio Cable………………………………………………………………2pcs
Furry Windshield…………………………………………………………1pc
User Manual………………………………………………………………1pc

Dual Channel Version

Transmitter………………………………………………………………2pcs
Receiver……………………………………………………………………1pc
Charging Cable……………………………………………………………1pc
Audio Cable………………………………………………………………2pcs
Furry Windshield…………………………………………………………2pcs
User Manual………………………………………………………………1pc

Specifications

Overall Specifications

• Transmission Frequency Band: 2400MHz-2483.5MHz
• Audio Frequency Response: 100Hz-16KHz±3dB
• Dynamic Range: 87dB (circuit performance)
• S/N Ratio: 85dB (circuit performance)
• Peak Input SPL: 97dB SPL (built-in mic)
• Pairing Method: automatic
• Effective Working Range: 20m (with obstacles); 50m (open area)

Receiver

• Transmission Frequency Band: 2400MHz-2483.5MHz
• Transmission Type: frequency hopping / digital FSK
• Receiving Sensitivity: -86dBm
• Battery Type: lithium-polymer battery
• Charging Interface: USB 5V
• Battery Life: approx. 8hrs
• Output Interface: ø 3.5mm TRS
• Dimensions: 50mm44.5mm15mm
• Net Weight: approx. 30g

Transmitter

• Transmission Frequency Band: 2400MHz-2483.5MHz
• Modulation Type: frequency hopping / digital FSK
• Transmit Power: 10dBm
• Mic Polar Pattern: omnidirectional
• Battery Type: lithium-polymer battery
• Charging Interface: USB 5V
• Battery Life: approx. 5hrs
• Output Interface: ø 3.5mm TRS
• Dimensions: 50mm44.5mm15mm
• Net Weight: approx. 30g

Note: The above data is measured by Takstar laboratory, and Takstar has the final interpretation right!

Function Descriptions

1. Power/Pair Button: press and hold for 2s to power on/off; or press twice to start pairing.

2. Power Indicator: lights up in solid amber under work status; flashes amber when low on battery; in solid red while charging, and goes off once fully charged.

3. Connection Indicator: flashes blue while searching for signal; lights up solid blue when connected successfully.

4. AF Indicator: lights up green when there is sound input; stays off when without sound input.

5. Built-in Mic: the transmitter uses the built-in electret mic when no external mic is connected.

6. External Mic Input: standard 3.5mm TRS mic input, offers 2.5V power supply for compatible mic.

7. USB-C Port: standard USB-C port for charging.

8. Transmitter Back Clip: used to fasten the product onto collar.

9. Power Button: press and hold for 2s to power on/off.

10. Connection Indicator: flashes blue while searching for signal; lights up solid blue when connected successfully.

11. Pair Button: use along with Power Button ① on the transmitter. Press and hold to enter pairing mode on the receiver (⑩ flashes blue), then quickly press the Power Button on the transmitter twice to start pairing (flashes blue); wait until the automatic pairing completes.
    Note: Generally, the receiver and the transmitter are paired before shipping out of factory.

12. Volume Button: press “dB” button to cycle through 3 audio levels. The AF indicator ④ on the receiver will flash according to the audio output level (flashes twice at level-1, three times at level-2, four times at level-3).

13. TRS Output: standard 3.5mm TRS connector for mono/multichannel signal output.

14. Receiver Back Clip: used to fasten the product onto DSLR shoe mount.

Operation Instructions

1. Press and hold Power Button for 2s to power up and start pairing automatically.
2. Clip the transmitter onto the collar of the user, or connect to an external mic.
3. To mount the transmitter on a camera, open the back clip and slide the transmitter into the camera shoe mount.
4. Connect the transmitter output with the “Audio Input” on the camera using a 3.5mm audio cable.

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:

1. Please check if the power of the connected equipment matches with that of this product before operation. Adjust the volume to proper level during operation. Do not operate at over-power or highvolume level for extended time to avoid product malfunction or hearing impairment.

2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local dealer for repair.

3. Never use any replacement battery with broken insulation. Do not charge non-chargeable battery.

4. Keep this product and its accessories in a dry and ventilated area.
   Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, vibrating, or from blocking any ventilation openings, to prevent malfunction.

5. The product must, when installed on walls or ceilings, be fixed firmly in place at adequate strength to prevent from falling.

6. Please abide by safety rules during operation. Do not use the product in places prohibited by laws or regulations to avoid accident.

7. Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer.

Email: sales@takstar.com
website: www.takstar.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>