Aerpro Wireless Charging Smartphone Pad APWC155 Instruction Manual
- June 6, 2024
- Aerpro
Table of Contents
Aerpro Wireless Charging Smartphone Pad APWC155
Specifications
- Qi certified
- Wireless output: 15W/10W/7.5W/5W
- Input Voltage: 12V/1.67A; 9V/1.67A; 9V/1.34A Output Voltage: 9V/1.67A; 9V/1.12A; 9V/0.83A; 5V/1A Charging efficiency: S65%
- Transmission distance: S6mm
- Size: 126 x 65 x 7 mm
- Weight: 50g
- Input port
- Wireless transfer contact area
- Wireless charging indicator
How to use your APWC155
- Connect supplied USB cable to the input port of the wireless charging pad.
- Connect opposite end of the cable into a USB car charger or USB power adapter (Not Included).
- Wireless charging indicator LED will turn red once plugged into a power source.
- The wireless charging pad is ready for your srnartphone or device.
Charging your device from the wireless charging pad
- Place your QI enabled device on the transmitter of the wireless charging pad.
- When successfully charging, the wireless charging indicator LED will turn blue.
- Once your device is fully charged the wireless charging indicator LED will tum of[
- If the wireless charging indicator LED flashes blue then there is a problem with the connection. Reposition your device to flx the problem.
Charging indicators
Red light on: Wireless charging pad stand-by
Blue light on: Wireless charging pad successfully charging device
Light off: Wireless charging device fully charged
Flashing Blue light on: Wireless charging unsuccessful (Problem)
NOTE:
-
The car charger or adapter used to power the Wireless Charging Pad that outputs the proper voltage is required (Not included). It should meet QC2.0, QC3.0 or QC4.0 standard. Aerpro Models APCC21 0 & APCC220 (In-Car Chargers); APHC210 & APHC220 (240V Wall Chargers) meet the requirements, sold separately.
-
The connected power car charger or adapter used must output 5V/2A or
9V/1.67 A. Using a charger or adapter with a lower output may result in malfunction or overheating. -
Quick Charge 3.0 power charger or adapter required for fast charge mode
-
Charging speed may vary depending on device specifications, input voltage and environment.
-
Phone cases or metal plates for magnetic attachment may interfere with wireless charging.
-
It’s normal for the charger and your device to get hot whilst charging. It will get even hotter if the device is also being used while charging. Allow charger to cool if too hot.
Inclusions
Wireless charging pad Micro USB charging cable User manual
Technical assistance
If you need assistance setting up or using your Aerpro product now or in the
future, call Aerpro Support Australia TEL: 03 – 8587 8898 FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
If you would like to download a digital copy of this manual, or other Aerpro
manuals/software, please visit the
http://aerpro.com website.
This manual is considered correct at time of printing but is subject to
change. For latest manuals and updates refer to the website.
www.aerpro.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>