Takstar NOUS Wireless Gaming Headset User Guide

Takstar NOUS Wireless Gaming Headset

Foreword

Listening to all directions, you can “play” the battlefield! ⸺TAKSTAR is the well known leading brand in China electro-acoustic industry. Liberty Gamer is the professional gaming headset developed by Takstar based on many years of technology accumulation. It features high performance and comfortable wearing and emphasizes on providing competition advantages and brilliant gaming experience.
Life is full of rules just like gaming. Enjoy the gaming freely and enjoy your life. Gamers obey the rules but are not limited by the rules. Try your best to enjoy the gaming and you are the liberty gamer. Gaming well and living well, you need a good headset.
If you have any questions or suggestions, please contact your local dealer.

Features

• 2.4GHz wireless transmission technology, up to 15m ultra-low delay Hi-Fi audio transmission
• Virtual 7.1 surround sound, accurate pan and ambient gaming experience
• Ø50mm NdFeB driver, high sensitivity, wide response and dynamic
• Detachable microphone, high quality picking up, prominent talkback experience
• Low power consumption, up to 30h gaming time
• Compatible with multiple systems for mobile equipment/PC application

Specification

Headset Specification

• Type：dynamic
• Unit Dia：Ø50mm
• Unit Impedance：32±15%
• Headset Frequency Response：20Hz-20KHz
• Headset Sensitivity：96±3dB at 1KHz
• Sample Rate：48KHz/16bit
• Frequency Response：20Hz-20KHz
• THD: THD＜0.5% 1KHz
• Output Power：10mW/32Ω
• S/N Ratio：90dB（A-Weighted）
• Virtual 7.1：DSP hard decode
• Operation Time：more than 30h
• Charging Time：approximate 2.5h
• Net Weight: approximate 330g

Microphone Specification

• Polar Pattern：unidirectional
• Sensitivity：-38dB±3dBV (0dB=1V/Pa at 1KHz)
• Output Impedance：2.2KΩ at 1KHz

Wireless Specification

• Operation Frequency：2402~2480MHz
• Transmission Power：≤2dBm
• Receiving Sensitivity：≥-85dBm
• Delay：≤16mS
• Data Transmission：USB2.0，supporting HID protocol
• Effective Range：more than 15m

Note：

1. Charging time and operation time depend on the operation status.
2. The transmission range changes according to the obstacles between the devices, the magnetic field around the microwave oven, static electricity, receiving sensitivity, antenna performance, operating system and other factors
3. The above data is obtained from the test of Takstar laboratory and has the final interpretation right!

Operation Instruction

A. Function

1. Volume +
2. Volume –
3. Mic mute switch
4. Audio input connector
5. Microphone connector
6. Virtual 7.1 surround switch
7. Power switch (keep pressing 2 seconds to turn on/off)
8. Headset operation LED
9. Type-C charging port
10. Mic operation LED
11. Reset port

B. Equipment connection

Connect the USB port of headset with PC or gaming equipment.
Note: t he USB port needs to use high power port (USB2.0 or more advanced version). The USB port of outdated keyboard or monitor may not to support high power equipment. Setting

Windows：
Select “LIBERTY GAMER NOUS”as the steps below: “control panel”/”hardware & sound”, “play”and “record”.

Mac：
Select “LIBERTY GAMER NOUS”as the steps below: “system preference setting”, “output”and“input”

PS4:
Select as the steps below: “setting”/“peripheral equipment”/“audio equipment”/ “output to headset”/select “all audio”.

Wired connection

Note: when it is connected in a wire way, it turns off and disconnects the wireless connection automatically.
Compatible with the equipment of CTIA connector.
Xbox One controller has no 3.5mm connector and it needs Xbox One headset adapter.

C. Microphone mute control

LED keeps lighting up: mute status . LED lights off: picking up status.

D. Caution

Automatically turning off: it turns off automatically after the headset has no connection out of the time limitation.
Reset matching: if the headset can not has the wireless connection. Turn off it and keep pressing the power switch for 5 seconds. When the operation LED flashes red it enters into matching mode. Insert into the reset port of the wireless USB adapter and press for 2 seconds to finish the matching and connecting.

Correct Operation

For safe and comfortable operation, please read carefully and abide by the following items:

1. To avoid hearing loss, set the volume of the player to minimum before connecting the headset. After putting the earphone on, increase the volume to a proper level. Noise is measured in decibels (dB). Any outside noise of 85 decibels or more will cause gradual hearing loss.
2. Please pay attention to your operation habits! Volume and time are directly and inversely proportional to hearing loss. The louder the volume, the shorter the time you listen; the more comfortable the volume is, the longer the time you listen. Listen high volume sound will cause damage to your hearing.

This dB table lists the comparison of some normal sounds and the potential hurt level to your hearing：

Vacuum cleaner /

blower

| 70dB| It has certain invasiveness, causing interference and

hindering telephone conversation

Food processor| 85-90dB| 85 is the level at which hearing loss (8 hours in a row) begins
Garbage cleaner Concrete mixer| 100dB| It is recommended not to expose to 90-100db sound for more than 15 minutes without protective measures
Electric saw / drill|

110dB

| Risk of hearing loss if exposed to more than 100dB for more than 1 minute
Rock & roll concert (varies by situation)| 110-140dB| The threshold of pain starts at about 120dB

The average person can hear the music safely at 70% volume for 4.6 hours every day. It is very important to know the volume and time when hearing music. Use your equipment sufficiently at safe volume level to enjoy the outstanding sound performance.

Maintenance

1. The rated power of headphone is 10mW. Please do not operate it at overload status to avoid headphone (or earphone) damage.
2. Please keep the headphone (or earphone) in dry and clean environment. During operation, prevent the headphone (or earphone) from water entering into it or d ropping or colliding to avoid damage.
3. Operating the headphone in high temperature or high humidity leads to headphone damage or shortening the headphone life.
4. Keep the headphone away from strong magnet to avoid demagnetizing or headphone sensitivity decreased.
5. Do not use strong chemical or detergent for cleaning.
6. Do not use sharp article to scratch the product surface.
7. Please do not disassemble or repair the headphone by yourself to avoid problem happens.

Caution

• To guarantee personal safety,do not wear or keep the headphone close (less than 10cm)to the pacemaker.
• Do not connect the cable plug with AC power socket
• To guarantee personal safety,do not operate the headphone (or earphone)during driving or riding or walking.
• Keep the headphone(or earphone)away from fire to avoid explosion.
• Supervise the children when they are using this product because this product is not a toy.
• Abide by the relative regulation or law during operation.
• Do not use these headphones if it is prohibited by regulation or law to avoid an accident

According to the test results of RL2004 / 108 / EG and European low voltage directive RL2006 / 95 / EG, this product conforms tao the limit values specified in the directive of the European Community on the integration of the laws of the member states on electromagnetic compatibility.

This symbol indicates that according to WEEE Directive (2012 / 19 / EU) and national laws, this type of waste will have potential harmful substances, which may have a negative impact on the environment and human health, so this product should not be disposed together with your household waste, and should be handed over to the authorized electrical and electronic equipment (WEEE) recycling station for recycling. At the same time, when you handle this product correctly, it will help the effective use of natural resources. For more information on where you can place your waste recycling equipment, please contact your local city off ice, Waste Management Bureau or household waste treatment service.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de termined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is su bject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that maycause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>