kogan OVCINDYBSWA Cindy Staggered Bookshelf User Guide

: June 6, 2024
: Kogan

Table of Contents

SAFETY & WARNINGS
COMPONENTS
ASSEMBLY
Need more information?
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kogan OVCINDYBSWA Cindy Staggered Bookshelf User Guide

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide prior to assembly. Retain this user guide for future reference.

Ensure no parts are missing.
Lay out all the components on a soft surface.
Carefully identify each component, especially those that are similar. The most
common mistake is getting things back to front.
Do not fully tighten screws (leave slightly loose). When the item is fully assembled, tighten the screws but do not overtighten.
Separate and identify each component from the hardware pack and rest each one in its proper location before fastening.
Do not, for any reason, use a power tool to assemble this product. The
use of power tools may apply excess force on the fixtures, causing damage.
A Phillips head screwdriver (not supplied) is required for assembly.

COMPONENTS

Parts list

No

| Size (mm)| Qty
---|---|---
1| 234 x 282 x 18|

1

2

| 234 x 342 x 18| 1
3| 234 x 402 x 18|

1

4

| 234 x 462 x 18| 1
5| 234 x 522 x 18|

1

6

| 234 x 600 x 18| 1
7| 236 x 1594 x 18|

1

Hardware

(A) Ø30 x 325mm (x10)
(B) 12mm (x4)
(C) Ø5.5 x 38mm (x12)
(D) Ø8 x 30mm (x12)
(E) Ø6 x 15 x 1mm (x1)
(F) (x1)
(G) Ø4 x 16mm (x1)
(H) (x12)

ASSEMBLY

Step 1: Insert D into the parts shown below.

D Ø8 x 30mm (x12)
Assembly Instruction

Step 2: Using a Phillips screwdriver (not supplied), secure C screws to connect the parts shown below.

C Ø5.5 x 38mm (x12
Assembly Instruction

Step 3: Attach A through the holes between parts 1, 2, 3, 4, 5, and 6.

A Ø30×325 (x5)
Step 4: Turn over the assembly and attach A and B as shown below.

A Ø30 x 325mm (x5)

B 12mm (x4)
Step 5: Cover visible screws on part 7 with H.
Align F on the top of part 7. Place E on top then using a Phillips screwdriver (not supplied), secure a G screw through E and F.

E Ø6 x 15 x 1mm (x1)
Hardware
F (x1)

G Ø4 x 16mm (x1)

H (x12)
Assembly Instruction

Step 6: Secure a screw (not supplied) through F to prevent the shelf from toppling.

TOPPLING FURNITURE WARNING:

It is strongly recommended that this product is permanently fixed to the wall.
Please seek professional advice if you are in doubt of what fixing device to use.
Regularly check that anchors are securely maintained.
Stability of tall items may be affected by thick carpets or uneven floors.
Do not place unanchored televisions on furniture.

Caution! For your safety when attaching the anchor fixings, please note the following:
Check any electrical wires or plumbing inside the wall before drilling any holes (if you are unsure, please seek professional advice from a qualified trades person)

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com