MiBOXER FUT094 4-Zone Color Temperature Remote Instruction Manual

May 15, 2024
MiBOXER

MiBOXER FUT094 4-Zone Color Temperature Remote

MiBOXER-FUT094-4-Zone-Color-Temperature-Remote-PRODUCT

Specifications:

  • Model No.: FUT094
  • Working Voltage: 3V (AAA * 2PCS)
  • Transmitting Power: 6dBm
  • Standby Power Consumption: 20A
  • RF: 2.4GHz
  • Modulation Method: GFSK
  • Control Distance: 30m

Product Usage Instructions:

Key Diagram:
Touch the color temperature ring to adjust the light color temperature.
Slide the brightness slider to adjust the light brightness.

  • Short press : control all paired lights; Long press: dim top brightness for all lights.
  • Short press : turn off all paired lights; Long press: turn on night light mode for all lights.

S1 S3 Short press: activate scene Long press 3 seconds: Save the current color temperature and brightness of the fixture. (the light flashes one time slowly once completed successfully).

Linking Code / Unlinking Code Instructions:

Linking Code Instructions:

  1. Switch off the light, then switch it on after 10 seconds.
  2. Short press the Link/Unlink button 3 times within 3 seconds when the light is on.
  3. Lights blink 3 times slowly means linking is done successfully.

Unlinking Code Instructions:

  1. Switch off the light, then switch it on after 10 seconds.
  2. Short press the Link/Unlink button 5 times within 3 seconds when the light is on.
  3. Lights blink 10 times quickly means unlinking is done successfully.

Group Control Instruction:
Pair lights into different groups for flexible dimming and control. Press the Link/Unlink button first and then dim as needed.

Frequently Asked Questions (FAQ):

  • Q: What type of products does this remote support?
    A: This remote only supports Mi-Light / Miboxer 2.4G product series. Please review the light instruction to check compatibility.

  • Q: How can I know when to change the battery of the remote?
    A: If the indicated lamp on the remote blinks quickly, it’s time to change the battery promptly. Avoid using poor-quality batteries to prevent battery leakage that could damage the remote.

  • Q: Can I use the remote in any environment?
    A: The remote is sensitive electronic equipment. Avoid using it in humid or high-temperature areas. Store it in a dry, static-free environment when not in use. Do not use the remote in wide-range metal or strong electromagnetic wave areas as it may affect the controlling distance.

4-Zone Color Temperature Remote
Model No.: FUT094

Features

This product adopt world-wide used 2.4GHz frequency, GFSK control method, with the features of low power consumption, long distance transmitting, strong anti-interference and fast communication rate. can control specified Mi-Light / MiBoxer smart light with color temperature, brightness.

Product Parameters

  • Model No.: FUT094
  • Working Voltage: 3V(AAA * 2PCS)
  • Transmitting Power: 6dBm
  • Standby Power Consumption: 20μA
  • Working Temperature: -10~40°C
  • RF: 2.4GHz
  • Modulation Method: GFSK
  • Control Distance: 30m

Products Key Diagram

MiBOXER-FUT094-4-Zone-Color-Temperature-Remote- \(1\)

  • Touch the color temperature ring to adjust the light color temperature.
  • Slide the brightness slider to adjust light the brightness.
  • Short press: control all paired lights;
    • Long press: dim top brightness for all lights.
  • Short press: turn off all paired lights;
    • Long press: turn on “night light mode” for all lights.
  • S1…S3 Short press: activate scene Long press 3 seconds: Save the current color temperature and brightness of the fixture. ( the light flashes one time slowly once completed successfully).

Linking Code / Unlinking Code Instructions

Attention: the light must be paired with remote control.

Linking Code Instructions

  1. Switch off light, after 10 seconds then switch on again.
  2. Short press ” I ” button 3 times within 3 seconds when light on.
  3. Lights blink 3 times slowly means linking is done successfully.

MiBOXER-FUT094-4-Zone-Color-Temperature-Remote- \(6\)

Linking failed if light is not blinking slowly, Please follow above steps again. (Note: Light that have linked can’t link again)

Unlinking Code Instructions

  1. Switch off light, after 10 seconds then switch on again.
  2. Short press ” I ” button 5 times within 3 seconds when light on.
  3. Lights blink 10 times quickly means unlinking is done successfully.

MiBOXER-FUT094-4-Zone-Color-Temperature-Remote- \(8\)

Unlinking failed if light is not blinking quickly, Please follow above steps again. (Note: Light haven’t linked that don’t need to unlink)

Group control instruction

Pairing lights into different groups, dim and control light flexibly Group control solution: Press “ I ” firstly and dim, example as below.

MiBOXER-FUT094-4-Zone-Color-Temperature-Remote- \(9\)

Attention:

  1. Countless lights can be added into each zone.
  2. One light only can be paired with one sub zone from anyone remote.

Attention

  1. This remote only support Mi-Light /Miboxer 2.4G product series, kindly review light instruction to check compatibility.
  2. In the using of the remote, if the indicated lamp blinking quickly, Please change the battery in time. Please don’t use poor quality battery to avoid the leaking of battery liquid to damage the remote.
  3. The remote is accurate electronics, don’t use it in humid or high temperature area, remove battery and keep it in dry or free static electricity environment.
  4. Please don’t use the remote on the wide-range metal or strong electromagnetic wave area, otherwise, it will badly affect the controlling distance.

Made in ChinaMiBOXER-FUT094-4-Zone-Color-Temperature-Remote-
\(10\)

Documents / Resources

| MiBOXER FUT094 4-Zone Color Temperature Remote [pdf] Instruction Manual
FUT094, FUT094 4-Zone Color Temperature Remote, 4-Zone Color Temperature Remote, Color Temperature Remote, Temperature Remote, Remote
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals