TAKSTAR DT-2 Dante Connect Box User Manual
- June 6, 2024
- TAKSTAR
Table of Contents
TAKSTAR DT-2 Dante Connect Box
Dante Connect Box
Dear Customer,
Thank you for purchasing TAKSTAR Dante Connect Box. Please read the user
manual carefully before operation and keep it for reference in future. If you
have any questions or suggestions, please contact our local dealer.
FUNCTION
- High quality A/D(24-Bit), D/A(32-Bit) convert, 48KHZ sampling rate.
- 2 channel balanced MIC/LINE XLR input, 2 channel balance output, Dante can support 2IN/2OUT.
- Dante digital network port configuration is a doubt standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 2IN/2OUT, using 24-bit precision and extremely low network latency.
- Each input channel with independent signal light and gain control, also with +48V phantom power controlled by switch. Its input channel 1 with high resistance switch selection, supporting guitar, bass, key instrument equipment input, input channel 2 extra with 2 stereo input port (one pair of RCA input and one 3.5mm socket). Supporting media player, notebook computer and others equipment signal input.
- Each output channel with independent signal light.
- Dante can be used in the standard existing network interchanger, has highly interoperability: perfect cooperation with other start using Dante device.
- Outer connect +12 VDC power supply, Power switch independently controlled and power indicator light.
FRONT PANEL
-
GIAN SPD
Can adjust input 1-2 channel gain, the max gain is 50dB. -
Signal Indicator Display input 1-2 channel level.
-
Phantom power switch Input 1-2 channel 48V will be opened when press the switch.
-
High resistance switch Press this switch to matching the impedance when it needs to through 6.3mm Jack socket to connect instruments.
-
Signal input socket Integrated COMBO socket, XLR connect MIC, 6.3mm Jack connect music input.
-
RCA input socket Connect stereo RCA input, signal mixing enter 2 channel processing.
-
Headset input socket Connect 3.5mm headset socket input, signal mixing enter 2 channel processing.
REAR PANEL
-
Dante network connect
Inside 2in/2out Dante card, can directly connect or transmit network audio signal by the interchanger. -
Signal Indicator Display output 1-2 channel level.
-
Signal output socket XLR balance output 1-2 Phoenix port.
-
Power supply socket DC12V input socket.
-
Power supply Press down is ON, the power indicator will always be on.
Technical parameters
- Input impedance: balance 10KΩ, unbalance 5KΩ
- MIC input gain: 50dBu
- Max input level: +15dBu
- Dynamic range: >105dB
- System THD (TH+N): <0.01%
- Max output level: +15dBu
- Output impedance: 200Ω(balance), 100Ω(unbalance)
- Frequency response: 20Hz-20kHz, -0.5dB
- DC input: +12V 2A
- Dimension: 130mm164mm44mm
Safety instruction
In order to avoid possible personal injury or property damage caused by electric shock, high temperature, fire, radiation, explosion, mechanical hazards and improper use, please read and observe the following items carefully before using the product.
- When using the product, please confirm whether the power of the connected device matches the power of the product, and adjust the volume of the device. Do not use it for a long time when the power of the product is exceeded or at a high volume to avoid product failure and hearing damage.
- If there is any abnormality (such as smoke, odor, etc.) during use, please turn off the power switch and unplug the power plug immediately, and then send the product to the dealer for maintenance.
- The product and accessories should be placed indoors in a dry and ventilated place. Do not store them in a humid and dusty environment for a long time. Avoid getting close to fire, rain, water, excessive collision, throwing, vibrating the machine and covering the ventilation holes during use, so as not to damage its function.
- If the product needs to be fixed on the wall or ceiling, please make sure to fix it in place to prevent it from falling down.
- When using the product, you must abide by the relevant safety regulations. Please do not use the product in the occasions that are clearly prohibited by laws and regulations to avoid accidents.
- Please do not disassemble, refit or repair the product by yourself to prevent personal injury. If you have any questions or service needs, please contact the local dealer for follow-up.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>