camry CR 7715 Heater User Manual
- June 6, 2024
- camry
Table of Contents
R 7715 Heater
User Manual
This Product is suitable only for occasional use or for use in well insulated rooms
Safety Conditions Important Instructions On Safety Of Use Please
Read Carefully And Keep For Future Reference
The warranty conditions are different, if the device is used for commercial purpose.”
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product
should be turned to a professional service location to be replaced in order to avoid
hazardous situations. -
ever use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let cord hang over edge of counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
-
Never use this device close to water, e.g.: Under shower, in bathtube, or above sink filled with water.
-
If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
-
Do not allow the device or power adaptor to get wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put hands in the water. Have the device checked by the qualified electrician before using it again.
-
Do not touch the device or power adaptor with wet hands.
-
lways turn the fan heater off and set the thermostat dial to minimum before removing the power plug from the socket.
-
Never use the fan heater in high humidity rooms – bathroom, shower room, swimming pools etc. The humidity can cause short circuit, and effect in damaging the device.
-
The operating fan heater needs to be under supervision and in sight all the time. If you are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is not used, the power plug has to be removed from the power outlet.
-
Do not connect the fan heater to the automatic switching device, for example temperature controlling device or time switch.
-
Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should be kept at least one meter from the fan heater.
-
Do not cover the device or put any objects on it while it is operating. Do not use the device to dry clothes.
-
The heating surfaces can heat to a temperature of 60 °C or higher. The fan heater should be in a place that children and animals do not have access to.
-
The device is not intended to be installed or used in vehicles.
-
Some parts inside the device can be hot or cause sparking. Do not use the fan heater in places, where gasoline, paints or other flammable materials are used or stored.
Device description:
1. “ON/OFF” Switch 2. Fan speed button 3.A. Temperature DOWN button
3.B. Temperature UP button 4. Timer button
Instruction Manual
- Plug device into desired 220-240V power outlet. Picture 1.
- Press “ON/OFF” switch (1) on side of the unit to “ON” position to turn on the device. Picture 2.
- Select your desired fan speed by pressing fan speed button (2) to choice between high (HH) or low (LL) on digital display. Picture 3.
- Select your desired temperature by pressing “+” button (3.B.) to raise temperature or “-“ button (3.A.) to lower the temperature between 15-32 degree of Celsius on digital display. Picture 4.
- When finished work, press “ON/OFF” Switch (1) to “OFF” position and unplug the device from power outlet. Store in a cool, dry place until next use. Picture 5.
Setting the timer
The device has a built-in timer that will automatically turn the unit off after a set amount of time.
- While the unit is plugged in and turned on, press the Timer button (4) to active the function of timer. Picture 6.
- Press Timer button (4), next to set desired number of hours by pressing button 3.B or 3.A. You can choose between 1-12 hours.
- Once desired number of hours have been chosen, stop pressing buttons 3.B or 3.A.
- To cancel timer settings, turn the device off.
NOTE : THE DEVICE HAS AUTOMATIC 12 HOURS DEFAULT TIME FEATURE.
NOTE: IF THE DEVICE STOPED WORKING BECAUSE OF OVERHEATING, PLEASE DETACH
THE
DEVICE FROM POWER SUPPLY
FOR RESET. AFTER MOMENT, PLUG IN THE DEVICE AGAIN.
CLEANING AND MAINTENANCE
- Make sure the device is not hot.
- Remove the plug from the socket before cleaning.
- Keep the inlet and outlet openings clean. Do not allow dust to settle on them.
- Use a dry or slightly damp cloth to clean the case.
- Do not immerse the device in water.
TECHNICAL DATA
Voltage: 220-240V 50/60Hz
Power: 400W
Max power: 700W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.