Reebok JET300+ Series RVJF-20721GDBT Treadmill + Bluetooth User Manual

Reebok JET300+ Series RVJF-20721GDBT Treadmill + Bluetooth User Manual

PARTS

PARTS LIST

• A02 – MAIN FRAME
• B04 – SPANNER AND SCREW DRIVER
• B05 – 5mm ALLEN KEY
• C01 – CONSOLE BASE
• C03 – CONSOLE BACK COVER
• C04 – CONSOLE PANEL
• C15 – LEFT UPRIGHT TUBE COVER
• C16 – RIGHT UPRIGHT TUBE COVER
• D07 – SAFETY KEY
• E07 – BOLT
• E13 – BOLT
• E20 – BOLT
• E26 – SCREW
• E32 – LOCK WASHER

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USING THIS TREADMILL. IT IS IMPORTANT YOUR TREADMILL RECEIVES
REGULAR MAINTENANCE TO PROLONG USE. FAILING TO REGULARLY MAINTAIN YOUR TREADMILL MAY VOID YOUR WARRANTY. KEEP HANDS AWAY FROM ALL MOVING PARTS. NEVER OPERATE THE TREADMILL IF IT HAS A DAMAGED CORD OR PLUG. KEEP THE CORD AWAY FROM HEATED SURFACES. WE SUGGEST THAT YOU CONSULT WITH YOUR PHYSICIAN OR HEALTH PROFESSIONAL BEFORE USE OF THIS MACHINE, THIS APPLIES FOR THE AGES OF 35+ OR PEOPLE WITH HEALTH ISSUES. WE TAKE NO RESPONSIBLITY FOR ANY INJURIES OCCURED IF YOU DO NOT FOLLOW OUR SAFETY GUIDELINES. THIS TREADMILL SHOULD BE CAREFULLY ASSEMBLED. DO NOT TURN ON THE POWER BEFORE ASSEMBLY IS COMPLETE

ASSEMBLY INSTRUCTIONS

FOLDING INSTRUCTIONS

MOVING YOUR MACHINE

LUBRICATION

SAFETY KEY

SAFETY PROCEDURES

• ALLOW FOR A MINIMUM SPACE, SHOWN BELOW, AROUND THE TREADMILL WHEN IN OPERATION.
  

• SERIAL NUMBER IS LOCATED ON THE FRONT BASE OF THE TREADMILL.

THIS PRODUCT IS SUITABLE FOR USER’S WEIGHT OF 140KG

WEEE logo this symbol on a product means that the product is covered by European Directive 2012/19/EU. Hereby, RFE international declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

PART LIST

NO.| PART DESCRIPTION| QTY| NO.| PART DESCRIPTION| QTY| NO.| PART DESCRIPTION| QTY
---|---|---|---|---|---|---|---|---
A01| base frame| 1| C25| volume control button| 1| D28| filter| 1
A02| main frame| 1| C26| base of volume control button| 1| D29| inductance| 1
A03| incline bracket| 1| C27| fan| 1| D30| speed sensor| 1
A04| console bracket| 1| C28| fan guide| 1| E01| nut (M6)| 2
A05| pulse bracket| 2| C29| fan axis| 1| E02| nut (M8)| 12
A06| left upright tube| 1| C32| running belt| 1| E03| nut (M10)| 6
A07| right upright tube| 1| C33| motor bottom cover| 1| E04| bolt (M1060 L20)| 1
A08| motor bracket| 1| C34| black cushion| 4| E05| bolt (M1045 L15)| 1
B01| front roller| 1| C35| blue cushion| 2| E06| bolt (M1030 L15)| 4
B02| back roller| 1| C36| blue cushion| 2| E07| bolt (M850 L15)| 4
B03| cylinder| 1| C37| plastic pad| 4| E08| bolt (M850 L20)| 2
B04| spanner and screw driver| 1| C38| motor belt| 1| E09| bolt (M845 L20)| 5
B05| 5mm allen key| 1| C39| transport wheel| 2| E10| bolt (M840 L20)| 2
B06| bushing| 4| C40| adjustable wheel| 2| E11| bolt (M830 L15)| 1
B07| transport wheel bushing| 4| C41| ring-shape wire plug| 2| E12| bolt (M820)| 4
B08| speaker net| 1| C42| flat foot pad| 4| E13| bolt (M815)| 8
B09| pulse steel plate| 4| C43| cone-shape cushion| 1| E14| bolt (M845)| 1
B10| spring plate| 2| C44| plastic holder| 1| E15| bolt (M835)| 1
B11| Reinforcement tube| 1| C45| button board| 1| E16| bolt (M655)| 3
B12| locking pin| 1| D01| computer board| 1| E17| bolt (M635)| 2
B13| belt hook| 2| D02| control board| 1| E18| bolt (M625)| 6
B14| hide board| 2| D03| top signal wire| 1| E19| bolt (M516)| 4
C01| console top cover| 1| D04| middle signal wire| 1| E20| bolt (M512)| 4
C02| console bottom cover| 1| D05| bottom signal wire| 1| E21| bolt (M58)| 17
C03| console back cover| 1| D06| pulse button| 2| E22| screw (ST4.240)| 8
C04| console panel| 1| D07| safety key| 1| E23| screw (ST4.230)| 4
C05| console panel bottom cover| 1| D08| AC single wire 200mm blue| 1| E25| screw (ST4.220)| 2
C06| left water bottle| 1| D09| AC single wire 200mm brown| 2| E26| screw (ST4.212)| 34
C07| right water bottle| 1| D10| AC single wire 350mm brown| 1| E27| screw (ST4.212)| 22
C08| pulse top cover| 2| D11| AC single wire 350mm blue| 1| E28| screw (ST2.98)| 30
C09| pulse bottom cover| 2| D12| grounding wire| 1| E29| screw (ST2.96)| 6
C10| handle bar| 2| D13| power wire| 1| E30| screw (ST4.215)| 4
C11| decoration strip i| 1| D14| power socket| 1| E31| washer (Ø6)| 3
C12| decoration strip ii| 1| D15| on-off button| 1| E32| washer (Ø8)| 14
C13| handle bar decoration ring| 2| D16| overload protector| 1| E33| washer (Ø10)| 2
C14| motor top cover| 1| D17| magnet ring| 1| E34| spring washer (8)| 6
C15| left upright tube cover| 1| D18| magnet core| 1| E35| flat washer (8)| 11
C16| right upright tube cover| 1| D19| incline motor| 1| E36| big washer (10)| 8
C17| back end cover| 1| D20| DC motor| 1| E37| screw (ST3.512)| 7
C18| left side rail| 1| D21| running board| 1| E38| bolt (M835 L20)| 6
C19| right side rail| 1| D22| speaker| 2|
C20| anti-slip pad| 2| D23| audio board| 1
C21| sticker of anti-slip pad| 2| D24| USB board| 1
C22| cushion| 2| D25| volume control board| 1
C23| air cushion| 4| D26| console panel sticker| 1
C24| safety key base| 1| D27| function button sticker| 1

COMPUTER FUNCTION

• A – INSTANT INCLINE
• B – INCLINE UP / DOWN
• C – STOP D – HOME
• E – FAN F – RETURN
• G – START
• H – SPEED UP / DOWN
• I – INSTANT SPEED
• J – VOLUME – / PREVIOUS SONG
• K – VOLUME + / NEXT SONG
• L – USB INPUT
• M- MP3 INPUT
• N – HEADPHONE INPUT

BUTTON OPERATION

• HOME
  Press to return to home screen.

• RETURN
  Press return to access previous screen

• START
  Press to start treadmill, the running belt will start moving.

• STOP/PAUSE
  Press to stop/pause treadmill, the running belt will slow before stopping completely.

• SPEED+/-
  Increase/decrease speed during workout.

• INCLINE+/-
  Increase/ Decrease incline during workout

• INSTANT SPEED
  Use this to select exact speed while running.

• QUICK SPEED
  Use this to select a different speed whilst running.

• INSTANT INCLINE
  Increase/decrease incline during workout.

• QUICK INCLINE
  Use this to select a different incline whilst running.

• MP3 INPUT
  Allows connection to personal MP3 player via supplied cable. Music will be played through built in speakers and volume controlled via device and volume buttons on the console.

• USB PORT
  Insert USB to play music/video stored on USB. Other devices may cause error to display.

• VOLUME + / NEXT
  MP3 input – Increase volume of music. Long press to increase volume. Short press to move to next song.

• VOLUME – / PREVIOUS
  MP3 input – Decrease volume of music. Long press to reduce volume. Short press to move to previous song.

• SAFETY KEY
  Included with this machine is a red safety key, the machine will not operate unless this is inserted. Its purpose is to immediately stop the machine in the event of an emergency. The computer will display “safety key disconnected” if not correctly attached to the treadmill. The clip on the other end of the safety key must be attached to the user at all times during your workout to ensure the machine stops immediately in the event of an emergency.

• FAN
  Use this to start or stop the fan.

HANDLEBAR CONTROLS

• SPEED+/ –
  Increase/ decrease speed during workout

• INCLINE+/ –
  Increase/ Decrease incline during workout

• PULSE GRIPS
  There are pulse sensors located on both handlebars, in order to monitor the users pulse rate these can be held in order for the reading to be given. The pulse monitor is a guide for reference only and not for medical use or monitoring.

• NORMAL MODE

1. From Standby press START to begin manual mode immediately
2. Treadmill speed and incline can be manually adjusted by using the  

SPEED +/- or INCLINE +/- buttons at any time during a workout

3. Press STOP/PAUSE button to pause or stop the workout.
4. Take out the SAFETY KEY to stop the working of the motor, or press STOP two times.

• LUBRICATION REMIND FUNCTION
  When the machine has completed 300km (188miles), the console will beep for every 10 seconds, and TIME window will show OIL. This means that your treadmill needs to be lubricated with oil (this should be completed every 6 weeks). To reset the console, hold STOP button for 3 seconds, the console will now beep and reset.

COMPUTER FUNCTIONS

• APPS
  Built-in applications. Note: Wi-Fi must be connected before using other apps.

• MUSIC
  Play music stored on USB.

• MOVIE
  Play videos stored on USB.

• SETTINGS
  Set Wi-Fi, language and backlight.

• VIRTUAL ACTIVE
  Select from 3 scenic settings to simulate reality.

• HRC
  Select grade, age, target time and target heart rate. (To use this function, you must hold onto pulse sensors for HR reading.)

• WORKOUT
  Click to choose time, distance or calories workout target. Besides, there are 24 build-in programs available.
  Press INCLINE+/- or SPEED+/- to change the incline or speed during operation of any program.

• USER PROGRAM
  Select from U1-U10 to create personalised workout. Press/drag on dot chart to adjust settings to desired speed/incline.
  On any screen, you can click the dot icon then select return, home, volume or hide the icon.

• PULSE
  Hold onto pulse sensors for pulse value. This data is for guide only and should not be used as medical data.

• POWER SAVER FUNCTION
  To reduce energy consumption, this treadmill will enter into sleeping mode if without any operation for 10 minutes. The screen will give reminding before enter into sleeping mode. Once machine enter sleeping mode, please take off safety key and insert again to awaken the system.

• WARNING!
  For your safety do not look at websites/videos whilst running.

MAINTENANCE & CARE

• IF THE RUNNING BELT MOVES TO THE RIGHT, TURN THE BOLT ON THE RIGHT SIDE ¼ TURN CLOCKWISE, THEN TURN THE LEFT BOLT ¼ TURN COUNTER-CLOCKWISE. IF THE BELT DOES NOT MOVE, REPEAT UNTIL IT CENTRES.

• IF THE RUNNING BELT MOVES TO THE LEFT, TURN THE BOLTS ON THE LEFT SIDE ¼ OF A TURN CLOCKWISE, THEN TURN THE RIGHT BOLT ¼ TURN COUNTER-CLOCKWISE. IF THE BELT DOES NOT MOVE, REPEAT UNTIL IT CENTRES.
  

• OVER TIME THE RUNNING BELT WILL LOOSEN. TO TIGHTEN
  THE BELT TURN THE LEFT & RIGHT SIDE BOLTS ONE FULL
  TURN CLOCKWISE, CHECK THE TENSION OF THE BELT.
  CONTINUE PROCESS UNTIL BELT IS THE CORRECT TENSION.
  ENSURE TO ADJUST BOTH SIDES EQUALLY TO CORRECT
  BELT ALIGNMENT
  

BLUETOOTH INSTRUCTIONS

• PLUG YOUR DONGLE INTO THE BLUETOOTH USB PORT

• CONNECT YOUR SMARTPHONE TO YOUR NEW REEBOK EQUIPMENT
  DOWNLOAD :
  Search ‘Reebok Fitness Equipment’ on the App Store or Google
  
  
  CONNECT:
  Your Reebok machine connects to the app via the bluetooth dongle, so you don’t need GPS or internet to use it.
  The USB connector is colour coded blue to match the correct USB port on your machine.
  Once you have selected a workout or planned your route, the app will ask you to choose the machine you would like to connect with.

• SELECT GET STARTED & CHOOSE FROM QUICK START, INTERVAL OR MAP MY ROUTE
  

• CONNECT TO YOUR MACHINE
  

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>