Cubitt x Reebok C1026 Smart Watch User Manual
- June 1, 2024
- Cubitt x Reebok
Table of Contents
- Your Smart Watch
- Steps for Use
- Wear Your Watch
- Power On
- Set up the Watch
- Get Started
- Crown and Button
- Common Functions
- Charge the Watch
- Change the Band
- Wear and Care
- Wear Your Watch
- Key Specifications
- Precautions
- Help and Guide
- FCC Requirement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Cubitt x Reebok C1026 Smart Watch User Manual
Your Smart Watch
Front
Back
Charging cable
Steps for Use
You can follow these steps to use Cubitt x Reebok:
- Wear →
- Power On →
- Set up →
- Start Using
The following steps will take approximately 5 to 10 minutes, please schedule a suitable time.
Wear Your Watch
Step 1: Thread the longer band through the first loop of the shorter
band.
Step 2 : Adjust to a comfortable tightness, then press the holes on the
longer band onto the metal pin buckle of the shorter band.
Step 3 : Insert the longer band into the second loop of the shorter band
and tighten.
Power On
Press the Digital Crown until the startup screen appears.
Note: If the watch can’t power on, it may be because the battery has
drained due to long periods of inactivity. Please charge it for approximately
10 minutes and wait for it to power on automatically.
Set up the Watch
Step 1: Download the Cubit Pro app
Go to the app store on your phone, search for Cubit Pro, and install it.
For Android phones, go to the Google Play.
For iPhone, go to the App Store.
You can also scan the QR code on the left to quickly go to the Cubit Pro
app in the app store, and install it.
Step 2: Pair with the App
Open the Cubit Pro app and select “Set Up a Device” on the home page.
Follow the instructions to pair your ” Cubit x Reebok ” via Bluetooth. Then
you can start using the watch.
Attentions:
- To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone’s system settings.
- To ensure successful pairing, please grant Cubit Pro app permissions to access Bluetooth, Location, and Camera on your phone.
Get Started
Touchscreen Operation
Support full-screen touch (swipe, tap, touch and hold)
Swipe up
Swipe left
Swipe right
Swipe down
Crown and Button
Press
- Press the digital crown to wake up the screen.
- Press the digital crown to enter the app center from the watch face screen.
- Exit the app
Rotate
- Toggle between screens or navigate through menus.
- Adjust the volume of prompt tones and phone calls.
Press the button
- Press to start Workout quickly
- Press to start Workout quickly
Common Functions
Notification Center
Swipe down on the watch face screen.
Control Center
To access the Control Center, swipe up on the watch face screen. Enable
features like Silent Mode, Sleep Mode, Always-on Display, and adjust
brightness and volume swiftly.
Tiles
To switch quickly between the Suggestions, Activity, Heart Rate, Sleep,
Weather, or Workout tiles, swipe left or right on the watch face screen.
Change the Watch Face
To change the watch face, press and hold the screen for 1 second to access the
watch face gallery.
Record Workouts
To start your workout recording, access the Workout app and select a specific
workout.
To obtain your exercise trajectory and other data when engaging in outdoor
activities, you need to connect the Fit being App while your smartwatch is in
outdoor mode.
Health Metrics Measurement
When wearing the watch, it automatically measures health data such as heart
rate, sleep, stress, and activity. You can also view and track this data in
the application.
Install New Watch Faces
In the Cubitt Pro app, navigate to the Face Gallery page to pick up your
preferred watch face.
Charge the Watch
To charge the watch, connect the charging cable to a USB power source. Attach
the other end to the charging contact on the back of the watch. The watch will
display a charging icon while it is being charged.
Note:
Make sure the USB charging plug is at the same side as the crown.
Ensure to use a standard USB power source with an output of 5V 1A or above.
Prior to charging, ensure to clean the charging contacts of the watch to
eliminate any lingering sweat or moisture.
Change the Band
Remove band
- Lift the spring bar from the groove.
- Push and hold the spring bar.
- Pull it out gently to remove the band.
Install band
- Insert the metal pin at position “A” in the hole.
- Push and hold the spring bar.
- Press the band into the body and release the spring bar.
- Pull the watch band to confirm the firm installation.
Wear and Care
- It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist.
- To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dish washing liquid, or cleaning wipes as they can cause skin irritation. Instead, use mild soap and fresh water to.
Wear Your Watch
For optimal data accuracy, please observe the following guidelines while wearing the watch:
-
Wear the watch at a position approximately two finger-widths from your wrist bone.
-
For comfort, adjust the band to allow a finger’s width between it and your wrist. This ensures both contact and fit.
Key Specifications
Product Name | Smart Watch |
---|---|
Display | 1.43″ HD AMOLED |
Resolution | 466 × 466 |
Battery Capacity | 370 mAh |
Wireless Connection | Bluetooth 5.3 |
Water resistance garde | 3 ATM |
Body Dimension | 46.5mm × 46.5mm × 11.3mm |
Working Temperature | 0°C 50°C |
Compatible Operating Systems | iOS 13.0 and above, Android 9.0 and above |
Precautions
-
Do not replace the built-in battery yourself as it may pose a safety risk.
-
Avoid forcibly opening the watch case, as it may cause short circuits and overheating.
-
Keep the watch away from environments exceeding 60°C to prevent battery leakage or explosion.
-
While the product complies with 3ATM waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow.
Note that the waterproof performance may be compromised if the product structure is damaged. -
Be aware that firmware upgrades can lead to interface and usage changes. For detailed information, please refer to the product’s upgrade instructions.
Help and Guide
Frequently Asked Questions
If you encounter any problems while using the product, you can access the
“Profile → Help & Support” section in the Cubitt Pro app for assistance.
Product Manual
You can find the complete product manual in Cubitt Pro app at “Profile → User
Guide”.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
ISED
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>