Scosche DIYBCKH Bluetooth Receiver Car Kit with Hands-Free User Manual
- June 6, 2024
- Scosche
Table of Contents
DIYBCKH
DO IT YOURSELF BLUETOOTH RECEIVER CAR KIT WITH HANDS-FREE
The DIYBCKH will allow you to connect your 8/uetooth enabled cell phone or 8/uetooth transmitter. This device is meant to be used with any factory to aftermarket radio containing an auxiliary jack input. The DIYBCKH simply plugs into your vehicle’s cigarette lighter and to an auxiliary jack input. For assistance or information, contact Scosche Tech Support: 800-621-3695 Ext. 3.
FEATURES
- Plug and play installation
- Compatible with 8/uetooth enabled cell phones, PDAs, or wireless devices with hands-free headset profile
- Compatible with 8/uetooth stand-alone audio transmitters and transmitting devices equipped with A2DP profile
- Built-in hands-free microphone
- D.S.P circuitry for hands-free clarity, echo cancellation and noise reduction
- Built-in (pass-through) mini USB charging port for additional connectivity
- Auto-pairing
- Seamless transition between hands-free cellular calls and audio streaming
SYSTEM REQUIREMENTS
- (+) 12v cigarette lighter or power socket
- Factory stereo or aftermarket radio with an auxiliary input jack
- Bluetooth enabled cell phone and/or Bluetooth streaming audio transmitter
PARTS INCLUDED
GETTING STARTED
The DIYBCKH must be connected to your car stereo before you can enjoy any of
the features of this unit. Your car stereo system must have an auxiliary input
port to work with the DIYBCKH. An auxiliary, or “AUX”
input for short, is a connection point somewhere on your stereo that will
allow connection to an “external” audio source such as a front panel or rear
audio input. Read the following paragraphs for descriptions.
The Bluetooth® trademark is owned by SIG and licensed to Scosche Industries
for use.
GETTING STARTED (cont. I)
Front Panel Inputs
Many factory or aftermarket car stereos have an auxiliary connection point for a portable device located somewhere on the front panel or faceplate. This is in the form of a 3.5mm (headphone-sized} female jack on the unit. Simply plug in the male connector DIYBCKH to the female connection on your stereo. Consult your car stereo’s user manual for details on how to operate or activate its auxiliary input functions.
Side Note: Starting in 2005, through 2007 and later, some vehicle factory-equipped stereos now include 3.5mm front panel audio inputs. Additionally, some vehicles may have a remote-located port somewhere else in the vehicle other than the front of the stereo such as the console or dashboard. Consult your vehicle owner’s manual for more information.
Rear Audio Inputs
Some aftermarket car stereos that do not have front panel inputs as previously described may have a set of audio inputs at the back of the unit. These consist of a set of RCA (left and right) input jacks at the back of the stereo labeled “AUX” or “BUS”. These types of inputs require the 3.5mm to L & R audio adapter. For rear inputs, the car stereo must be removed in order to access the back panel for the connections. Rear audio inputs provide CD-quality audio.
Side Note: Some aftermarket radios require a BUS controller input. For application information on your specific aftermarket radio please contact Scosche Tech Support.
PAIRING
Initial Pairing
-
Have the DIYBCKH unit plugged into the cigarette lighter and press the power button on the DIYBCKH unit for 5 seconds to activate pairing mode. The blue & red LEDs will begin to flash continuously.
-
Power on your 8/uetooth enabled cell phone and be sure to have 8/uetooth “ON”. Make sure your 8/uetooth device is in pairing mode to look for nearby 8/uetooth devices. If needed, consult your 8/uetooth
products manual for information on pairing or finding other 8/uetooth devices.
a. Press and hold the power button on the IBUTT for approximately 5 seconds. The blue LED will begin to flash indicating that the unit is in pairing mode. -
Initial pairing can take up to 2 minutes. If you are prompted for a passcode then enter “0000”. If successful, the LED on the DIYBRH will illuminate solid red. When re-connecting, the pairing process should take 5-10 seconds.
-
You should hear the audio from your cellphone through the vehicle’s speakers during a call.
-
If you are not successful in pairing devices, repeat steps 1-4 above. Make sure both devices enter pairing mode at or near the same time. Power of any other 8/uetooth mobile devices you do not intend to use. If you still cannot successfully pair two devices, contact Tech Support.
DIYBCKH with CELL PHONE and SCOSCHE RECEIVER
- Have the 8/uetooth function enabled on your cell phone?
- Power on your Scosche DIYBCKH receiver. It will attempt to connect with your cell phone first, then your IUBTT transmitter.
- Once the DIYBCKH re-establishes its connections the DIYBCKH should re-connect within 5-10 seconds thereafter. The DIYBCKH LED will illuminate solid RED when the connection is established.
NOTE: Some 8/uetooth cellular phones may not auto re-connect with other previously connected 8/uetooth devices. You may need to turn on 8/uetooth each time the Scosche receiver is powered on. Consult your cell phone owner’s manual for details on 8/uetooth operation for your phone.
TROUBLESHOOTING
LED/COLOR
|
STATUS
---|---
Blue LED blinking| Paired mode
Blue LED solid (headphones) Blue LED slowly blinking (transmitter)| Connected
with Bluetooth Headphones or Bluetooth receiving device
Red & Blue LED Solid (Violet Hue)| Charging and connected with Bluetooth
device
Red LED solid| The battery is currently charging or low battery
Red LED off| Charging complete
BACKGROUND NOISE/EMI NOISE
While the DIYBCKH is in use the sound quality may become distorted due to other factors in the vehicle. DSP technology helps filter out background noise and echoes in the car. Situations that may affect the performance of this unit include:
- Having the windows and/or doors open may cause DSP technology to transmit distorted or disturbing sounds.
- Having the 8/uetooth enabled cell phone too close to the DIYBCKH receiver and communication noise from the cellphone may be heard in the speaker
This product may not be compatible with all 8/uetooth features on all 8/uetooth enabled cell phones. This may or may not include sentient control functions, volume adjustment, and voice dialing. Please consult your Bluetooth-enabled cell phone operating manual for specific features and instructions.
WARNING
This equipment may be reset by unintentional electrostatic discharge during
operation. Exposure to direct sunlight or extreme heat may cause damage or
malfunction.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorientate or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ television technician for help. The changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.
LIMITED WARRANTY
Scosche Industries Inc. warrants this product to be free from defects in
material and workmanship for a period of 90 days from purchase. This Scosche
product is sold with the understanding that the purchaser has independently
determined the suitability of this product. This warranty is offered to the
original purchaser of the product only. This warranty does not cover the
product if physically damaged, subject to negligence or misuse, abuse,
alteration, accident, or an act of GOD. This warranty does not apply to a
product that has
water or physically damaged by accident or which has been misused,
disassembled, or altered.
The original dated sales slip or proof of purchase will establish warranty
eligibility. If the product should prove defective within the warranty period.
return the product with proof of purchase to Scosche Industries Inc. Scosche,
at its option, will replace or repair the product free of charge and return
the product postage paid. In no event shall Scosche Industries, Inc. be
responsible for claims beyond the replacement value of the defective product,
or in any way be liable or responsible for consequential or incidental
damages. No express warranties
and no implied warranties, whether for fitness or any particular use or
otherwise, except as set forth above (which is made expressly in lieu of all
other warranties) shall apply to products sold by Scosche. Scosche Industries
cannot be held responsible for discrepancies/incon consistencies that may
occur due to automotive manufacturing changes or options.
If you have any further questions, call our TOLL-FREE number:
TECHNICAL HELPLINE: 1-800-621-3695
Ext. 3
© ‘2007 SCOSCHE INDUSTRIES, INC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>