beper 40.926 Ionic Straightening Brush Instructions
- June 6, 2024
- beper
Table of Contents
beper 40.926 Ionic Straightening Brush
For further information and/or for instructions for use in other languages , please visit: beper.com
Cod.: 40.926
Precautions
Read the following instructions carefully, since they give you useful safety
information about installation, use and maintenan-ce and help you avoid
mishaps and possible accidents. Remove the packing and make sure that the
appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be
accessible to the children, in order to preserve them from danger sources. It
is recommended not to throw these packing ma-terial in the domestic waste, but
to deliver them to the appropriate station of collection or destruction
refusals, asking eventually infor-mation to the manager of the Sanitation
Department of your own mu-nicipality.
If the supply cord is damaged, it must be replaced by the manufac-turer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable
plug by qualified personnel only, which shall also ensure that the section of
the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not
recommended; should they be necessary, please use only simple or multiple
adaptors and extensions in compliance with the safety rules in force, making
sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not
exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not
use the appliance after a possible irregular working. In this case, switch it
off and do not break it open. Refer to an authorized Beper after-sale service
for repair and require original spare parts only. Failing to follow these
instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is
to be considered as improper and thus dangerous. The manu-facturer cannot be
responsible for any damages deriving from impro-per, wrong or incautious use.
This appliance is for household use only.
- To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
- Do not use the appliance near explosives, highly flammable mate-rials, gases or burning flames.
- Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over.
- Close supervision is necessary when any appliance used by or near children.
Some warnings
Do not use this device in a bathtub, shower, or water-filled reservoir. When
the brush is used in a bathroom, unplug it after use since the proximity of
water presents a hazard even when the brush is switched off.
For additional protection, the installation of a residual current device (RCD)
having a rated residual operating current not exceeding 30 mA is advisable in
the electrical circuit supplying the bathroom. Ask your installer for advice.
Warning: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
Burn hazard. Keep appliance out of reach from young children, parti-
cularly during use and cool down.
When the appliance is connected to the power supply, never leave it
unattended.
Always place the appliance with the stand, if any, on a heat-resistant, stable
flat surface.
Description of the product Fig. A
- High-temperature resistant shell
- Thermally insulated outer bristles
- Heating surface
- Thick metal heating bristles
- Thermally insulated bristles heads
- ON/OFF button
- + button
- – button
Connect the appliance to the main socket. Turn the appliance on by pressing
the ON/OFF button for a few se-conds, until the display lights up.
Press the + or – buttons to select the desired working temperature; it is
advisable to set the appliance at the highest temperature at first, in order
for it to heat up properly, and then to decrease temperature based on the
amount and type of hair to be styled. For thicker hair, recommended working
temperature is 200-230°C; for all hair types, recommended working temperature
is 150-200°C; for thin hair, recommended working temperature is 80-150°C
After the appliance has been switched on and the temperature set, wait a few
minutes until the selected tempe-rature is shown on the display, and then
start using the brush to style your hair as desired.
Turn the appliance off by pressing the ON/OFF button for a few seconds until
the display shuts off.
Remove the plug from the socket when not in use, and wait until it has
completely cooled down before storing it.
Cleaning and maintenance
Unplug the brush from the main socket and wait for it to cool down before
performing any cleaning operation. Gently remove hair and dust by hand, making
sure not to damage the bristles heads; use a soft cloth to wipe dust and dirt
from the outer case and the display.
Warning: do not immerse the appliance and/or its power cord in water or
any other liquid
Technical data
Power: 55W
110-240V~50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve
the product without any notice.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee ap-plies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the applian-ce’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beper reserves the right
to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward
your enquiries to your distributor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>