MONSTER MLB7-1074 Smart RGBW LED Lamp with Dual Charging User Guide

SMART RGBW LED Lamp
with dual charging

QUICK START GUIDE
MLB7-1074
vl 0 0921

GETTING STARTED

Thank you for choosing the Arc+ 3-in-1 Smart LED Lamp by Monster Smart Illuminessence. This quick start guide will help you with the setup and installation of your device.

WHAT’S IN THE BOX

•  Arc+ Smart LED Lamp
• USB Type-C Power Cable
• Quick Start Guide

WHAT DO YOU NEED?

• Cellphone or tablet with Android 6.0 Marshmallow or higher / iOS 10 or higher
• Wi-Fi router with an Internet connection
• Wi-Fi 2.4GHz 802.11n
• 5V2A / 9V 3A QC USB power source (not included)
  Before setup. make sure your phone is connected to the 2AGHz WI-FI network that your Arc+ will be placed on. For easier pairing, turn on Location and Bluetooth to quickly find nearby devices.

TIP: Do you know your Wi-Fi network name and password? Write it down now if it’s hard to remember.
ANYTHING ELSE?
The Arc+ is a Smart LED lamp, a headphone stand, and an lOW wireless charger with USB charging to charge additional devices. Additional devices and cables are not included.
TIP: Save these instructions for future reference.

POWER/CHARGING

INPUT POWER
To power the ARC+. plug the included USB Type-C cable into the input port at the back of the device, and the other end into a 5V2A USB / 9V 3A QC USB power adapter (not included). Then, plug the power adapter into a powered AC outlet. The LED indicator at the rear of the device will illuminate red to indicate that It is powered.

NOTES:

• Standard 5W wireless charging can be enabled by a 5V 2A USB power adapter.
• For 10W wireless fast charging, the Arc+ must be powered by a 9V 3A QC USB adapter (20W).
• Using a wall adapter providing less than the required power may result in improper charging and/or a flicker in the LED lighting.
• Always use the included 3A rated USB Type-C power cable with this device.

USB CHARGING
Connect a USB charging cable to the USB-A port at the rear of the Arc+. Connect the other end of that cable to your USB rechargeable devices such as headphones or a mobile phone.

WIRELESS CHARGING
The Arc+ wireless charger is designed to work with Qi Compatible wireless charging phones. Confirm that your phone is Qi-compatible before charging. Place your Qi-enabled device on the wireless charger at the center of the Arch- as illustrated below. The LED indicator at the rear of the product will illuminate blue to indicate that the device is charging.

Note: Wry thick protective cases can obstruct charging. For effective charging, it may be necessary to reposition the phone or remove the case.
Caution – To prevent damage to the phone or the charger:

• Remove metal cases. or cases with any magnet/metal components before charging.
• Do not place metal objects on the charger during charging. Qi wireless chargeable phones with metallic-looking finishes will charge normally.
• NOTE: Wireless chargers generate heat when charging. and it may temporarily stop charging if it gets too hot.
• Multiple Q devices cannot be charged at the same time.

This wireless charger is designed fa the iPhone 12/12 Pro. Phone 12 Pro Max Pixel 5/5XL Poet 4/5. Nexus 7. Gateway 520/520+ or higher. It is aLso compelling,* with all other Qi ena tie wireless charging devices.

WIFI SETUP

STEP 1
Ensure that your Arc+ is adequately powered.
STEP 2
Download the app from the App Store (for iPhone) or Google Play Store (for Android phones).
STEP 3
Make sure your phone or tablet is successfully connected to the 2.4GHz WI-Ft network that your Arc+ will be placed on and ensure that your Bluetooth Is enabled.
Open the app and create an account by following the on- screen instructions.
STEP 4
It is recommended to first pair your Arc+ in a location close to your router BEFORE installation.
Press the power/mode button twice quickly to turn the unit on. then press and hold to enter pairing mode. The Arc + lights will begin blinking when it has entered pairing mode and is ready to pair.
NOTE: At any time of ter 10 seconds of pairing mode you can disconnect the power for 10 seconds and then reconnect it to cancel pairing and operate the product without Wi-Fi. Advanced features will not be available.
Monster Smart deuces only work on a 2.4GHz Wi-FI network. Much newer home Wi- Fl networks are mixed networks that are set to Salz by default (ex: AT&T. Vedzon) and sou may need to use AP palls mode to connect. If you still have difficulty. contact your Internet Service Premier for assistance with a 2.4GHz network setup.

Pairing Modes

EZ MODE – RAPIDLY BLINKING LED (default)
EZ Mode is the default mode for a quick and easy pairing setup.
AP MODE SLOWLY BLINKING LED
Access Point Mode is a secondary setup that can help connect to mixed networks. If you have trouble pairing, see troubleshooting on page 7.
Note: Press and hold the power/mode button for 5-6 seconds to enter pairing mode or change between pairing modes.

STEP 5
Confirm that the device is in pairing mode. LED Is RAPIDLY blinking. In the MI SMART app, select the a+”
In the upper right corner of the home screen to add a new device.

The app will detect the nearby Wi-Fi+BLE enabled device and ask if you would like to add it. Click “Go to add”.
Ensure that the device is checked and then click the “+” button.

STEP 6
Confirm that the network displayed Is your 2.4GHz WI-Fl network then enter your WI-FI password and click “Confirm”.

Once complete. your device will be connected to the network. Confirm or change the settings for your device and then click “Done’ Your Arc+ is now set up and ready to use!
You can now use the app to add voice control (see pg 10). adjust settings. create custom lighting effects. set schedules. and more!

TROUBLESHOOTING

HAVE TROUBLE WITH SETUP?
Don’t return this product to the retailer, we’re here to help.
Please can write us for customer support:866-246-2008 [email protected]
Q: Why is my device failing to connect to my Wi-Fi network?
Al: Make sure your phone or tablet is successfully connected to the 2.4GHz WI- Fl network that your device will be placed on.
A2: Make sure you enable Bluetooth and allow location services on your phone or tablet to find nearby devices.
A3: If your Wi-Fi network is a mixed 2.4G-Iz network, try using AP pairing mode for better results

1. In the app. select tit “+” in the upper right comer of the home screen to add a new device and then select lighting (Wi-Fir.
2. Click-Net Pairing Mode” in the upper right to switch to AP mode.
3. Confirm that the LED indicator is slowly blinking, conf km the network is your mixed WI-A network enter your W-Fl password and click “Cent km”.
4. Flow on-screen instructions to set up your device via a wireless access point.

A4: If you still have issues with your mixed network, you may need to access your router settings and/or call your Internet Service Provider to create a separate 2.4GHz network.
Q: Why is my phone not charging or fast charging?
A: Your phone must be compatible with wireless charging. A2: Cases or phone holders will interfere with wireless charging please remove them before use. A3: Do not place any metal object other than your smartphone device within the charging field. A4: Ensure that your Arc+ is connected to sufficient power. Without meeting the power input requirements, the features of the Arc+ will not function properly.
Q: Why is my headphone or another device not charging?
Al: Ensure that your Arc+ is connected to sufficient power. A2: Ensure that the charging cable you are using is the correct cable for your device.
For other frequently asked questions please visit our website atwww.monsterilluminessence.com

HOW TO USE

Your Arc+ Smart LED Lamp can be easily controlled with the power/mode button, the app to access advanced and customizable lighting effects, or by using a compatible voice assistant product for hands-free operation. (see page 8)
CONTROL YOUR LIGHTING

SOUND REACTIVE LIGHTING
The Arc+ features a built-in mic for sound reactive lighting effects. In music mode, the built-in microphone “hears” your music and media to create dynamic. sound reactive lighting effects.
In the Monster Smart app select the scene “Music Reactive.” You can also change any scene to sound reactive by clicking “Edit” and changing the Color Changing Mode to “Music React” and clicking “Submit”.

APP CONTROL: CUSTOM SCENES
The app gives you full control over all the functions of the Arc+, as well as the ability to edit preset scenes and create your own custom scenes. Below are some of the custom scene features for Arc +:

VOICE CONTROL OPTIONAL

AMAZON VOICE CONTROL SETUP Make sure your Amazon Alexa device is installed and setup
STEP 1: Open the Alexa app and go to Skills in the menu
STEP 2: Search for and choose
STEP 3: Enable the Skill and authorize your account using your login information
NOTE: Use the same login information that you used to create your Monster Smart account

At any time, go to the Alexa app to set nicknames and rooms for your devices You can also rename devices in the Monster Smart app.
Using the name Arc+. or the name you assigned your Arc+. you can ask Alexa to control your device. just say “Alexa.” and ask: “ Turn on my Arc +”, “Set my Arc+ to blue, “Set my Arc+ to 50% brightness” and more!

GOOGLE VOICE CONTROL SETUP

Make sure your Google Assistant device is installed and set up.
STEP 1: Open the Google Home app. go to the Home menu, and tap the “+” button
STEP 2: Click “Set up device”
STEP 3: Click “Have something already set up?”
STEP 4: Search for and choose and authorize your account using your login information
NOTE: Use the same login information that you used to create your Monster Smart account

At any time, go to the Google Home app to set nicknames and rooms for your devices. You can also rename devices in the Monster Smart app.
Using the name Arc+, or the name you assigned your Arc+, you can ask your Google Assistant to control your device. just say “Hey Google” and say: “ Turn on my Arc +”, “Set my Arc+ to blue”, “Set my Arc+ to 50% brightness”, and more!

SIRI VOICE CONTROL SETUP

Requires iPhone running iOS 12 or later.
STEP 1: Open the app and go to the “Smart” menu, tap the “+” button to create a new Tap To Run Smart Scene
STEP 2: Tap “launch Tap To Run” and fill out the information
STEP 3: Once your Smart Scene is created and saved. Click the button that appears at the bottom of the screen that says “Add to Siri” to open the list of options
STEP 4: Select your new Tap To Run Smart Scene from the list and click “Add to Sid”
STEP 5: Create a custom phrase to say to Sid to run your Smart Scene (this can be any verbal command)

Now Sid can use your voice and custom verbal command to turn your device on or off, activate your last used lighting scene, adjust Arc+ at the same time as your other smart devices, or whatever you’ve set up as your Tap To Run Smart Scene.

NOTES

WARRANTY

1 Year Limited Warranty – Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions this warranty is null and void.

SAFETY

• Keep these instructions.
• Read all the instructions before using the product.
• Do not use this product for anything other than Its intended use.
• Do not expose the product to direct sunlight or extremely high or low temperatures
• Do not expose to rain or moisture. do not handle with wet hands, and do not use near water such as a swimming pool. bathtubs, or sinks
• Do not drop, puncture, or disassemble this product
• Use a clean soft cloth to clean. Do not use corrosive or abrasive cleaners to the dean.
• Repairs to electrical equipment should only be performed by qualified electricians. Improper repairs may place the user at serious risk.
• Use the specified power source and voltage.
• Make sure the wall charger is inserted all the way into the electrical outlet When not in use, unplug the wall charger.
• Place the unit on a sturdy and flat surface.
• Do not place metal Items on the surface of the product.
• Do not place magnetic cards or similar items near this product.
• Do not cover the product with paper or other materials Use in a well-ventilated area
• Do not dissemble. There are no serviceable parts inside.

Power by

Arc+ I Model: MLB7-1074 I Input: USB 5V 2A / 9 3A USB Output: 5V 2A max I Wireless Charger Output: 5W /10W FCC ID: 2AHAS-MLB71074 I IC: 26069-MLB71074 I MLf37-1074
The illustrated products and specifications may differ slightly from those supplied. The M Monster logo and IlluminEssence are trademarks or registered trademarks of Monster. inc. or its subsidiaries in the U.S. and other countries and are used under license. Apple and the Apple logo are trademarks of Apple Inc.. registered in the U.S. and other countries. App Store is a service mark of Apple Inc Google, Android, and Google Play are trademarks of Google LLC. Pre-set-up required. Amazon. Alexia. and all related logos are trademarks of Amazon.com. Inc. or its affiliates. All other brand names are trademarks of th6r respective owners. Neither Jem Accessories. Inc. nor Monster. Inc. is affiliated with the respective owners of their trademarks. Licensed and Manufactured bg Jem Accessories Inc. South Plainfield(d. NJ 07080. Made in China

FCC Compliance
This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. hover, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer Oran experienced radio/TV technician for help.

RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body
1 YEAR LIMITED WARRANTY

Jem Accessories, Inc. Limited Warranty Policy for Monster Smart Products Last Updated: March 27, 2020, This limited warranty contains important information about your rights and obligations, as well as limitations and exclusions that may apply to you.

1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Jem Accessories, Inc. (“Jem Accessories”), 32 Brunswick Ave, Edison, New Jersey, USA, warrants to the owner of the enclosed Monster Smart-branded product contained in this box (“Product”) will be free from defects in materials and workmanship for a period of one year. Notwithstanding the foregoing, the Warranty Period for a factory refurbished Product is one (1) year, even if installed by a professional. If the Product fails to conform to this Limited Warranty during the Warranty Period, Jem Accessories will, at its sole discretion, either (a) repair or replace any defective Product or component; with proof of purchase using original documentation. Repair or replacement may be made with a new or refurbished product or components, at Jem Accessories’s sole discretion. If the Product or a component incorporated within it is no longer available, km Accessories may, at Jem Accessories’s sole discretion, replace the Product with a similar product of similar function. This is your sole and exclusive remedy for breach of this Limited Warranty. Any Product that has either been repaired or replaced under this Limited Warranty will be covered by the terms of this Limited Warranty for the longer of (a) ninety (90) days from the date of delivery of the repaired Product or replacement Product, or (b) the remaining Warranty Period. This Limited Warranty is not transferable from the original purchaser to subsequent owners.
2. TOTAL SATISFACTION RETURN POLICY If you are the original purchaser of the Product and you are not satisfied with this product for any reason, you may return it in its original condition to the retailer in compliance with the retailer’s return policy.
3. WARRANTY CONDITIONS; HOW TO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a claim under this Limited Warranty, the owner of the Product must (a) visit monsterilluminessence.com/support during the Warranty Period to provide notice of your warranty daim and describe the alleged failure, and (b) comply with Jem Accessories (or its authorized distributor’s) return shipping instructions. Jem Accessories will have no warranty obligations with respect to a returned Product if it determines, at its reasonable discretion after examination of the returned Product, that the Product is an Ineligible Product (defined below).
4. WHAT THIS LIMITED WARRANTY DOES NOT COVER This Limited Warranty does not cover the following (collectively “Ineligible Products”): (i) Products marked as a sample” or” Not for Sale”, or sold IS”; (ii) Products that have been subject to (a) modifications, alterations, tampering, or improper maintenance or repairs, (b) handling, storage, installation, testing, or use not in accordance with any quick start guide, manual or other instructions provided by Jem Accessories; (c) abuse or misuse of the Product; (d) breakdowns, fluctuations, or interruptions in electric power or the telecommunications net, work; or (e) Acts of God, including but not limited to lightning, flood, tornado, earthquake, or a hurricane; or (iii) any non-Jem Accessories branded hardware products, even if packaged or sold with Jem Accessories hardware. This Limited Warranty does not cover consumable parts, including batteries unless damage is due to defects in materials or workmanship of the Product, or software (even if packaged or sold with the product). Jem Accessories recommends that you use only authorized service providers for maintenance or repair. Unauthorized use of the Product or software can impair the Product’s performance and may invalidate this Limited Warranty.
5. DISCLAIMER OF WARRANTIES Except as stated above in this limited warranty, and to the maximum extent permitted by applicable law, Jem Accessories disclaims all express, implied, and statutory warranties and conditions with respect to the product, including the implied warranties of merchantability and fitness for a particular purpose. To the maximum extent permitted by applicable law, km Accessories also limits the duration of any applicable implied warranties or conditions to the duration of this limited warranty.
6. LIMITATION OF DAMAGES In addition to the above warranty disclaimers, in no event, will Jem Accessories be liable for any consequential, incidental, exemplary, or special damages, including any damages for lost data or lost profits, arising from or relating to this limited warranty or the product, and Jem Accessories’s total cumulative liability arising from or related to this limited warranty or the product will not exceed the amount actually paid for the product by the original purchaser.
7. LIMITATION OF LIABILITY The Jem Accessories online services at monsterilluminessenceam (“services”) provide you information (“product information”) regarding your Jem Accessories products or other peripherals connected to your products (“product peripherals”). The type of product peripherals that may be connected to your product may change from time to time. Without limiting the generality of the disclaimers above, all product information is provided for your convenience, as is”, and “as available”. Jem Accessories does not represent, warrant, or guarantee that product information will be available, accurate, or reliable or that product information or use of the services or product will provide safety in your home. You use all product information, the services, and the product at your own discretion and risk. You will be solely responsible for (and Jem Accessories disclaims) any and all loss, liability, or damages, including to your wiring, fixtures, electricity, home, product, product peripherals, computer, mobile device, and all other items and pets in your home, resulting from your use of the product information, services, or product. The product information provided by the services is not intended as a substitute for direct means of obtaining the information. For example, a notification provided through the service is not intended as a substitute for audible and visible indications in the home and on the product, nor for a third-party monitoring service that monitors alarm state.
8.  YOUR RIGHTS AND THIS LIMITED WARRANTY This Limited Warranty gives you specific legal rights. You may also have other legal rights that vary by state, province, or jurisdiction. likewise, some of the limitations in this Limited Warranty may not apply in certain states, provinces, or jurisdictions. The terms of this Limited Warranty will apply to the extent permitted by applicable law. For a full description of your legal rights, you should refer to the laws applicable in your jurisdiction and you may wish to contact a relevant consumer advisory service. If you need to start a warranty claim for your Monster Smart device, please reach out to Customer Support by emailing custonnerservicomonsterilluminessence.com or calling our support number 866-246-2008. Please allow 7-10 business days to process warranty claims. Customers located outside of the U.S. will be responsible for all shipping costs.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>