solac SMD-330T Aroa Premium Electric Kettle Instruction Manual

solac SMD-330T Aroa Premium Electric Kettle

DESCRIPTION

1.  Hinged lid
2.  Lid opening button
3.  On/off switch
4.  Red on light
5.  Insulated handle
6.  Body of the appliance
7.  Base
8.  Filter
9.  “Prog” programming button
10.  Temperature selection buttons
11.  Blue programming light
12.  Display screen

USE AND CARE:

•  Do not switch the appliance on without water.
•  Do not use the appliance if the on/off switch does not work.
•  human consumption is recommended.
•  Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
•  Take care when handling recipients containing liquids heated in this appliance as they may boil fiercely.

SERVICE:

•  Make sure that the appliance is serviced only by specialist personnel, and that only original spare parts or accessories are used to replace existing parts/accessories.
•  Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void.

INSTALLATION

Make sure you have removed all packing material. In order to prevent possible risk of accidents, do not leave items such as plastic bags, polystyrene or cables within the reach of children.

FULLY UNROLL THE APPLIANCE’S POWER CABLE BEFORE EACH USE.

•  Clean the appliance following the appliance cleaning instructions in this manual.
•  Place the appliance on a flat, stable surface that can withstand the weight and heat emitted from the appliance.

USE:

•  Open the lid (1) by pressing the opening button (2).
•  Fill the body of the appliance (6) with cold drinking water.
•  Place the body of the appliance (6) on its base (7).
•  Plug the power cable in to a socket.
•  Close the lid (1) of the appliance.
•  Press the on/off switch (3) to turn the kettle on.
•  The red on light (4) will come on. The display screen (12) will show “ON”.
•  The kettle may be turned off manually using the on/off switch (3) again or will switch off automatically then the water has boiled.

TEMPERATURE SELECTION FUNCTION

•  Open the lid (1) by pressing the opening button (2).
•  Do not move the appliance while in use.
•  Use the appliance handle/s, to catch it or move it.
•  Do not use the appliance if it is tipped up and do not turn it over.
•  Do not turn the appliance over while it is in use or connected to the mains.
•  Respect the MAX and MIN levels
•  Disconnect the appliance from the mains when not in use and before undertaking any cleaning task.
•  Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
•  Do not store the appliance if it is still hot.
•  The appliance is only intended for heating water; as a consequence the appliance should not be used for the cooking or heating of milk…
•  The use of bottled mineral water adapted for
•  Fill the appliance (6) with cold drinking water.
•  Place the body of the appliance (6) on its base (7).
•  Plug the power cable in to a socket.
•  Close the lid (1) of the appliance.
•  Press the on/off switch (3) to turn the kettle on
•  The red on light (4) will come on. The display screen (12) will show “ON”.
•  Press the programmable button (9). The red on light (4) will go off and the blue temperature selection light (11) will come on. The number “50” will flash on the display screen (12).
•  Select the desired temperature by pressing the + or temperature selection buttons.
•  You can select any temperature between 50o and 95oC, in increments of 5oC.
•  Once you’ve selected the temperature, the number indicated will flash for a few seconds and then be memorised. The number shown on the screen indicates the current temperature of the water.
•  The kettle may be turned off manually at any time using the on/off switch (3). The appliance will beep after 12 seconds of boiling.
•  When the water reaches the selected temperature, it will be kept at this temperature for 2 hours. The kettle will switch itself on and off automatically as necessary to maintain the desired temperature.
•  After maintaining the temperature for two hours, if the kettle has not been used it will go into standby mode.

CLEANING

•  Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
•  Clean the electrical equipment and the mains connection with a damp cloth and dry. DO

NOT IMMERSE IN WATER OR ANY OTHER LIQUID.

•  Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
•  Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
•  Neither parts of this appliance are suitable for cleaning in the dishwasher.

HOW TO DEAL WITH LIMESCALE INCRUSTATIONS:

•  For the appliance to work correctly it should be kept free of limescale or magnesium incrustations caused by the use of hard water.
• To prevent this kind of problem, we recommend the use of water with low lime or magnesium mineralization.
•  However, if it is not possible to use the kind of water recommended above, you should periodically remove the limescale from the appliance:
•  Every 6 weeks if the water is “very hard”.
•  Every 12 weeks if the water is “hard”.
•  A specific anti-limescale product should be used on this kind of product.
•  Homemade solutions are not recommended in the decaling of this appliance, such as the use of vinegar

References

• SOLAC, tienda online de electrodomésticos – sOlac
• USA Location information - USA.com
• Espresso Machine Repair, Coffee and Espresso Machines | Bergenfield, NJ
• SOLAC, tienda online de electrodomésticos – sOlac

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>