i-PRO WV-QWL500-W Wall Mount Bracket Instruction Manual

i-PRO WV-QWL500-W Wall Mount Bracket

Product Information

The product is a wall mount bracket designed for attaching dome-type cameras facing down on a wall. It is available in two models: WV-QWL500-W and WV- QWL500-G. The bracket is manufactured by i-PRO Co., Ltd.

Standard Accessories

• Operating Instructions (1 pc.)
• Fixing screws for attachment plate (5 pcs.) – M4 x 8 mm (5/16 inches) – 1 spare included

Other Items Needed (Not Included)

• Fixing screws (M4) – 4 pcs.

Specifications

• Ambient Operating Temperature
• Dimensions
• Mass
• Finish: WV-QWL500-G (Light gray)

Manufacturer Information
i-PRO Co., Ltd. is the manufacturer of this product. For more information, visit their website:

• For U.S. and Canada: i-PRO Americas Inc.
• For Europe and other countries: i-PRO EMEA B.V.
• Website: https://www.i-pro.com/

Important Precautions

• The product must be securely mounted to the wall according to the Installation Guide to prevent injury.
• Do not mount the product on a desktop or at a slant as it may affect camera performance and shorten its lifetime.
• If the product is no longer in use, it should be removed.

Installation Precautions

• Installation work requires technique and experience, so it is recommended to consult the dealer or a professional.
• The product should only be used with suitable cameras to avoid drops and accidents.

Product Usage Instructions

1. Before attempting to connect or install the product, read the Operating Instructions carefully and save the manual for future reference.
2. Ensure that the installation location is suitable and will not interfere with normal use.
3. Gather all the standard accessories provided with the product, including the Operating Instructions and fixing screws for attachment plate.
4. If needed, acquire additional fixing screws (M4) – 4 pcs.
5. Refer to the corresponding section of the document for information about screws and brackets required for installation.
6. Make sure to select screws according to the material of the location where the camera will be mounted. Do not use wood screws or nails.
7. Securely mount the product on a wall following the Installation Guide provided. Ensure that it is properly attached to prevent injury or accidents.
8. For detailed installation instructions, consult the Installation Guide or seek assistance from the dealer or a professional.
9. If the product will no longer be used, remove it from the wall.

Note: Always follow safety precautions and consult professionals if needed to ensure proper installation and usage of the
product.

Wall Mount Bracket

⚫ Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
⚫ The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.

Preface

• This product is used to attach dome-type cameras facing down on a wall.
• For the latest information about the supported cameras, refer to our support website (https://i-pro.com/global/en/surveillance/training_support/support/technical_information <Control No.: C0501, C0502, C0112>).

Specifications

• Ambient operating temperature: –50 °C to +60 °C {–58 °F to +140 °F}
  • 158 mm (W) × 112 mm (H) × 188 mm (D)
  • {6-7/32 inches (W) × 4-13/32 inches (H) × 7-13/32 inches (D)}
• Mass: Approx. 520 g {1.15 lbs}
• Finish: Aluminum die cast
  • WV-QWL500-W : i-PRO white
  • WV-QWL500-G : Light gray

Precaution

• Refer installation work to the dealer.
• Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product.
• Be sure to consult the dealer.
• Install the product securely on a wall in accordance with the installation instructions. Failure to observe this may cause injury or accidents.
• Do not use this bracket except with suitable cameras.
• Failure to observe this may cause a drop resulting in injury or accidents.
• Do not install this product on a place that is greatly influenced by wind.
• Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall of the product resulting in injury or accidents.
• The measures of protection against snowfall shall be taken.
• Weight of snow may cause a fall of the product resulting in injury or accidents.
• Protect the product against snowfall by installing it under eaves.
• When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.

Caution:
Before attempting to connect or operate this product, please read these instructions carefully.

Notice:

• This equipment is not suitable for use in locations where children are likely to be present.
• Do not install this product in locations where ordinary persons can easily reach.
• For information about screws and brackets required for installation, refer to the corresponding section of this document.

Standard accessories

• Operating Instructions (this document) … 1 pc.
• Fixing screws for attachment plate ……..5 pcs.
• (M4 x 8 mm {5/16 inches}) (of them, 1 for spare)

Other items that are needed (not included)
Fixing screws (M4) ………………… 4 pcs.

IMPORTANT

• Minimum pullout strength: 196 N {44 lbf} (per 1 pc.)
• This value indicates the minimum pull-out strength required value per screw. For information about the minimum pull-out strength, refer to our support website .
• Select screws according to the material of the location that the camera will be mounted to. In this case, wood screws and nails should not be used.

Precautions for installation

• In order to prevent injury, the product must be securely mounted to the wall according to the Installation Guide of this bracket.
• Mounting method for this product
• This product is for attaching to a wall. If the product is mounted on a desktop or at a slant, the camera may not work correctly and its lifetime may be shortened.
• Make sure to remove this product if it will no longer be used.

< Installation example>
NOTE
When an outdoor 360-degree panoramic type camera is attached using this product, it will be close to the wall surface, so the infra-red light built into the camera will have an effect on the images taken. Additional information on omnidirectional shooting using an IR LED is available at the Website below.
https://i-pro.com/global/en/surveillance/training_support/support/technical_information