Simply Retrofits 3CCT Wide Linear Strip Fixture Owner’s Manual

Simply Retrofits 3CCT Wide Linear Strip Fixture Owner’s Manual

IMPORTANT:

Before assembling your fixture, please make sure that you carefully read through this instruction sheet.
Consider having your fixture installed by a qualified licensed electrician.

Note: The important safeguards and instructions that appear in this sheet are not meant to cover all possible conditions and situations that mayoccur.
It must be understood that common sense, caution, and care are factors that cannot be built into anyproduct. These factors must be supplied by the person(s) caring for and operating the fixture.

General Wiring Diagram

Wiring Diagram With Emergency

Wiring Diagram With Emergency and Sensor

Note:

In the case of 208 or 240 line voltage,the 2″ hot eg will be connected to the white lead coming from the fixture.

Chain Hang Installation

1. Install the hanging hooks(included)onto the top of the fixture, Make sure the wiring hangers are fully engaged into the holes on the top channel.

2. Hook the chain onto the hanging hooks then onto the ceiling anchors(not provided).

3.  Open the wiring cover and make the wiring connections with terminal cap (refer to the General wiringdiagram) the replace the wiring cover.

4.  Installation is complete.

Linkable Installation

1. With screws,Use the connecting fittings to lock the back of the fixture.
2. For chain hanging, hook the chain onto the hanging hooks, then onto the ceiling anchors (not provided).

Read More About This Manual & Download PDF:

References

• Simply Retrofits – High Quality LED Lights, Panels, Highbays, Pot Lights & more

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>