CHAUVET PROFESSIONAL ONAIRPRODUCER Customize and Operate Seamlessly User Guide
- June 5, 2024
- Chauvet Professional
Table of Contents
CHAUVET PROFESSIONAL ONAIRPRODUCER Customize and Operate Seamlessly User Guide
About This Guide
The onAir Producer Quick Reference Guide (QRG) has basic product information
such as mounting and menu options.
Download the User Manual from
www.chauvetprofessional.com for more
details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT
OUR WEBSITE. For Customers in the United States and Mexico:
www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the
Netherlands, Luxembourg, France, and
Germany:www.chauvetlighting.eu/warranty-
registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or his service agent.
- The product is intended for professional use only.
- DO NOT open this product. It contains no user-serviceable parts.
- CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
- DO NOT install this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it (IP20).
- DO NOT operate this product if the housing or cables appear damaged.
- In the event of a serious operating problem, stop using immediately.
- The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
- The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
- The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America, and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Refer to Contact Us at the end of this QRG for contact information.
What is Included
- onAir Producer
- USB C charging cable
- Quick Reference Guide
DC Power
This product has a 3.7 V, 1,200 mAh lithium ion battery which can be charged by any standard 5V power adapter via the included USB C charging cable.
Battery Charge Notes
This product is equipped with a built-in rechargeable lithium ion battery.
-
Avoid depleting the battery below 10%.
-
For best results, charge the battery in a temperature between 32 °F (0 °C) and 95 °F (35 °C).
-
When charging the battery, keep the product at least 1 m away from any open flame or hot plate.
-
If the battery is completely discharged, the device cannot be turned on immediately when the charger is connected. Allow a depleted battery to charge for a few minutes before turning on the device.
-
While charging, the device may heat up. This is normal and should not affect the device’s lifespan or performance.
If the battery gets hotter than usual, the charger may stop charging. -
Do not place the product in a closed container when charging the battery.
-
Do not charge the battery for more than 24 hours.
Storage Notes
- Recharge the battery to full capacity before storing the product.
- Store charged product(s) in a dry environment, away from direct sunlight.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. The onAir Producer uses RDM to make changes to the menu map options of the connected onAir products. Download the User Manual from www.chauvetprofessional.com for more details.
Mounting
The onAir Producer is designed for handheld or tabletop use. It features a loop to which a lanyard or carabiner may be attached for your convenience.
Mounting Diagram
Control Panel Description
Menu Map
Refer to the onAir Producer product page on www.chauvetprofessional.com for the latest menu map.
Using the Copy Presets and Send Presets function with more than 1 onAir product connected will cause undesired errors in the connected products.
Contact Us
chauvetcs@chauvetlighting.com
www.chauvetprofrssional.com
UKtech@chauvetlighting.eu
www.chauvetprofessional.eu
BNLtech@chauvetlighting.eu
FRtech@chauvetlighting.fr
DEtech@chauvetlighting.de
servicio@chauvet.com.mx
www.chauvetprofessional.mx
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U. K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.
onAir Producer QRG Rev. 1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>