CLAS OM 8039 Injector Extraction Fork Instruction Manual
- June 13, 2024
- CLAS
Table of Contents
CLAS OM 8039 Injector Extraction Fork
Product Information
The OM 8039 Fourchette Extraction Injecteurs is a specialized tool designed
for extracting injectors from Renault, Nissan, Opel, and Fiat vehicles. It is
manufactured by CLAS Equipements, a
company based in Chignin, France. This product is designed to ensure the
proper removal of injectors and is compliant with the technical specifications
outlined in the user manual. It is essential to read and follow the
instructions provided in the manual for optimal performance and safety.
The dimensions of the extraction fork are as follows:
- Fork Width: 25 mm
- Connection Thread: M18x1,5
- Height: 61 mm
- OEM: EN-46786/KM328B
Product Usage Instructions
Before using the OM 8039 Fourchette Extraction Injecteurs, it is mandatory
to read and understand the instruction manual thoroughly. Failure to do so may
result in misuse or improper usage of the
tool.
Follow these guidelines for safe and effective use:
- Ensure that you have the necessary protective gear, including work gloves, protective footwear, a hard hat, and safety goggles.
- Only expert personnel should operate this tool. Do not allow unauthorized or untrained individuals to use it.
- Inspect the tool before each use to ensure it is in proper working condition. If any issues are detected, contact the manufacturer or authorized technician.
- Position the extraction fork correctly on the injector to be removed, aligning it with the injector’s connection thread.
- Apply even pressure and force downward on the fork, gradually extracting the injector from its housing. Exercise caution to avoid damaging the injector or surrounding components.
- Once the injector is successfully extracted, carefully remove it from the fork and proceed with the necessary maintenance or replacement procedures.
If you encounter any problems during the usage of this product, please contact your authorized technician for assistance. For component or part inquiries, reach out to your reseller. For any other concerns or inquiries regarding the product, you can contact CLAS Equipements via email at sav@clas.com or by phone at +33(0)4 79 72 69 18. Additional information can also be found on their website at clas.com.
WARNING
Before returning this product for any reason (installation problem,
instructions for use, breakdown, manufacturing problem…), please contact us.
Contact: You can reach us by mail at sav@clas.com
or by phone at +33(0)4 79 72 69 18 or go directly to our website
clas.com If you have changed your mind regarding your
purchase, please return this product before you attempt to install it.
INTRODUCTION
It is compulsory to read this instruction manual before starting any kind of action. The proper operation and full compliance of this product’s performance is guaranteed only if all the instructions provided in this manual are closely adhered to. We guarantee that this product complies with the technical specifications described in this manual. The manufacturer shall not be held responsible for any improper uses other than those described herein. Use protective work gloves, protective footwear, hard hat, and safety goggles.
Misuse
- This product should only be used as described in this documentation; any other use is considered improper.
- The manufacturer accepts no responsibility for any damage caused by the incorrect or unreasonable use of the equipment.
- Moreover, misuse shall also void the warranty.
Take care of your tools
- Be sure to store your tools in a clean state.
- Place the tools inside their original package.
Only expert personnel are allowed to use this tool.
CARACTÉRISTIQUES TECHNIQUES
Fork width 25 mm
Connection thread M18x1,5
Height 61 mm
OEM EN-46786/KM328B
CLAS Equipements
ZA de la CROUZA
73800 CHIGNIN
FRANCE
Tél. +33 (0)4 79 72 62 22
Fax. +33 (0)4 79 72 52 86