mercury VDP001 HD 7 Inch Colour Video Door Phone User Manual
- June 6, 2024
- Mercury
Table of Contents
VDP001 HD 7″ Colour Video Door Phone
Item ref: 350.020UK
User Manual
A sleek and modern video door phone that provides superb full-color HD images
in all light conditions along with high-quality duplex speech between the
video head unit and the external camera call point. Images in darker hours are
also enhanced by the automatic activation of 6 infra-red LEDs. The stylish
low-profile video head unit provides the facility to monitor the video feed
from the external camera, talk to your visitor and options to both unlock an
external door and an additional electric gate. The head unit faceplate and
external call point chassis are manufactured in aluminum providing a tough and
attractive finish. Also provided are 15m of
installation cable and a UK power supply making the unit ideal for DIY
installation.
Features:
- 7” widescreen display with 1080p high definition imaging
- Weatherproof outdoor station with night vision
- 2-way intercom
- Electric door release function
- Outdoor gate release function
- Adjustable volume, image brightness, and colour
- 16 ringtones to choose from
- Complete with 15m of cable and power supply for DIY installation
- Comes complete with rechargeable batteries and a wall fixing kit
www.avsl.com
Specifications:
| Power supply | 12Vdc, 2000mA |
|---|---|
| Screen | 7” |
| Screen resolution | 800 x 400 (RGB) |
| Aspect ratio | 5:03 |
| Talk time | 120 seconds +/- 10% |
| Power consumption | Static <2W, Working <7W |
| Effective distance | Approx. 1m (outdoor unit) |
| Viewing angle | Approx. 45° (outdoor unit) |
| Operating temperature | -10~+40°C (indoor unit), -15~+50°C (outdoor unit) |
| IP rating | IP44 (outdoor unit) |
| Cable length | 15m (supplied) |
| Dimensions (indoor unit) | 215 x 152 x 18mm |
| Dimensions (outdoor unit) Weight (indoor unit) | 130 x 51 x 47mm |
| Weight (outdoor unit) | 390g |
| Weight (outdoor unit) | 180g |
Pack contents:
1pc Video screen for indoor use
1pc Camera call point for outdoor use
1pc Rain guard fixing bracket for the outdoor unit
1pc Mains adaptor for the screen
1pc Fixing bracket for the screen
1x Reel 15m x installation cable
1pc Pack of fixing screws
1pc User manual
Installation instructions
Indoor Unit
Fasten the fixing bracket for the video head unit to the wall using the fixing kit provided. Use the screws and wall plugs if you are screwing straight into the wall surface or the fixing bolts if you are using a back-box.
Outdoor Unit
- Install the outdoor unit at a height of 1.4m to 1.7m up from the ground, ensuring it’s not going to be in direct sunlight.
2. Fasten the rain guard fixing bracket in the desired location using the screws and wallplugs provided.
3. Run the supplied length of cable between the indoor and outdoor unit
ensuring it’s secured correctly and won’t get caught or snagged on any doors
or moving surfaces.
4. Connect up the wires according to the wiring instructions (next page).
5. Finally, clip the unit into the rain guard bracket and secure using the
small screw provided. Reseal the hole using the rubber grommet provided.
Wiring Instructions
- Please use the installation cable supplied unless you need a greater distance between the2 units. If you are extending the operating distance from 15m to up to 50m please use an appropriate 4-core 0.5mm² diameter cable and from 50m up to 100m please use an appropriate 4-core 0.75mm² diameter cable.
- When you are connecting the unit to an electric door lock or gate release please use an appropriate 2 core 1.0mm² diameter cable.
- Connect wires 1,2,3 and 4 to both units respectively as highlighted in the diagram below.
- Terminals 5 and 6 on the indoor unit are to be used for an electric door lock. Pressing the release button applies 12 volts of DC at up to 500mA max.
- Terminals 7 and 8 on the indoor unit are closing contacts rated at 5A for an electric gate release. The release must have its own power supply and the contacts will act as a switch if wired in series with this.
- Finally connect the power supply to the indoor unit and hang it on its fixing bracket.
Indoor Video Screen
1. Monitor
2. Door release
3. Gate release
4. Talk
5. Microphone
6. Melody volume
7. Melody select
8. Screen brightness
9. Screen color saturation
10. Speaker volume
Outdoor Camera Call Point
1. Rain guard fixing bracket
2. Microphone
3. Camera
4. Infra-red lights
5. Call button
Operating Instructions
- When a visitor presses the call button on the outdoor unit the indoor unit melody will sound and the video feed will automatically switch on.
- Press the talk button on the indoor unit to hold a 2-way conversation with your visitor for a maximum talk time of approx. 120 seconds. Press the talk button again to end the conversation early.
- Press the door release and/or gate release buttons accordingly to allow your visitor access to your premises.
- Use the monitor button to switch on the video feed if no one has pressed the call button. This is useful if you hear a noise outside and want to check for intruders.
- On the side of the indoor unit, you can adjust the volume of the melody to (L/M/H) using the melody volume switch.
- Below the melody, volume switch is the melody select button, press this repeatedly to scan through the various melodies available on the unit. There are 16 melodies in total to choose from.
- . On the lower side of the unit are the adjustment controls for video and volume. Use these to adjust the brightness and color of the video feed and the volume of the main unit.
Trouble Shooting
No picture or signal| Ensure all connections are secure.
Ensure the indoor unit power is connected and on.
Ensure there is nothing obstructing the camera lens
---|---
No audio on the intercom| Ensure the unit volume is turned up.
Ensure there is nothing interfering with the speaker or
camera on both units. Ensure all connections are secure.
The outdoor unit cannot
call the indoor unit| Ensure all connections are secure.
Door/Gate release not
working| Ensure all connections with the locks are secure.
Ensure your lock is connected to a power supply that is
powerful enough to operate it.
My visitor cannot hear outside, but I can
hear them| Ensure you have pressed the talk button on the indoor
unit to operate the 2-way intercom.
Ensure all connections are secure.
Warnings
- For reasons of electrical safety, neither unit must be cleaned with water or other liquids or immersed in water. Always clean the lens of the camera on the outdoor unit and screen on the indoor unit with a dry and soft lint-free cloth.
- Keep the indoor unit away from high temperatures and out of direct sunlight.
- Keep the outdoor unit out of direct sunlight.
- Do not install the indoor unit close to a television or any other piece of electronic equipment that emits radio waves as it may interfere with the reception and signal quality.
- When a vehicle passes close by to the outdoor unit whilst in operation, it is possible that some interference is received to the picture and sound.
- Please do not use this device if you find that it is damaged in any way.
- Do not attempt to repair this device or take it apart under any circumstances, as this will invalidate your warranty.
This product is classed as Electrical or Electronic equipment and should not
be disposed with other household or commercial waste at the end of its useful
life. The goods must be disposed of according to your local council
guidelines.
Errors and omissions excepted.
Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park,
Taylor Road, Trafford Park, Manchester. M41 7JQ.
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>