Guanyu GY-Z10 3-In-1 Foldable Magnetic Wireless Charger User Manual
- June 6, 2024
- Guanyu
Table of Contents
Guanyu
GY-Z10 3-In-1 Foldable Magnetic Wireless Charger
**User Manual
**
PRODUCT INTRODUCE
Simple, elegant, golden ratio outline, foldable and portable, wide
compatibility with devices, creative iWatch charging drawer, multi-angle
adjustable metal bar for view magnetically nagging new iPhone series, charge 3
devices wirelessly and simultaneously with only 1 able… this is 3 in 1
foldable magnetic wireless charger that newly designed for your fashion and
cool way of charging.
The phone charging pad can magnetically hold the phone vertically and
horizontally in order o have a great view, so this part is mainly for iPhone
12 series and above( if supports MagSafe charging). And for other Qi-enabled
phones like iPhone 8 and Galaxy S21, it supports flat charging only. For
iWatch charging pad, it’s only for Apple Watch S2 to S6 and E while the
earbuds charging area is not only for AirPods 2 and AirPods Pro but also for
popular android TWS earbuds like Galaxy buds.
You can enjoy your charging experience safely and effectively with the
protection of over-voltage,over-current,over-temperature, and FOD function.
HOW TO CHARGE
- Plugin the Type-C cable to power on the wireless charger, the white light will be on. Put your phone on the phone charging pad, it will be automatically charged and the blue light will breathe. If it is magnetically attached to the pad, you can adjust the height and angle of view by folding and stretching the adjustable metal bar if you want .
- To charge your Watch, pull out the iWatch charging drawer below the right of the whole charger first, then put your watch to charge on the Watch charging pad, you can turn up the pad to charge horizontally, especially for a single round watch strap.
- Place your earbuds case on the center of the earbuds charging area to make sure the charging light of the case of the earbuds is on, then charging is getting started.
LED LIGHT INSTRUCTIONS
| LED Status | Standby Mode | Phone Charging | FOOD |
|---|---|---|---|
| LED Color | |||
| LED Light | Solid White Light | Blue Light Breathing | Blue Light Flashing |
Note: the light shows for phone charging only
CHARGING SCHEMATIC DIAGRAM
APPLICABLE DEVICE
-
Smart Phone:
Apple: iPhone 12,42 Pro,12 Pro Nlax12 mini,SE,11,11 Pro,11 Pro Max, Xs, X# Max, XR, X,8,8 Plus.
Sampung: Galaxy|S: 21 5G,21+ $G,21 Ultra 5G,20 5G, 20+ 4G, 20 Ultra 5G, 20 FE 5G, 10]10+,10e,9,9+,8, 8+, 7,7 edge,b,6 edge,6 edge+,6 G9209,B6 Active.
Gaaxy Note:10,40e,1 0+,9,8, 7,45.
Huawei: P30 Pro, P40 Pro,P40 Prot. Mate: 40F, 40 RS, 40 Prof, 40 Pro, 40,3QE Pro,30 5G, BO Pro 54 30,30 Pro, 39 RS, 20 Pro, 2G RS, RS.
XiaOmi: 10,10 Pro,8,9 Pro,Mix 3, Mix 2s
Including other devices with a wireless charging receiver built-in.
(Note: All deviceg must meet the Qi standard). -
Smart Watch:
Apple: iWatch S2]S3,S4,S5,S6,SE. -
Earbuds:
Apple: AirPods 2, AirPods Pro.
Sunjsung: Galaxy: Buds, Buds+, Buds Pro, Buds Live.
Huawei: Freebuds: 2,3,4), Pro.
And more TWS(other Qi enable earbuds).
PRODUCT SPECIFICATION
Input 9V/2A ,9V/2.7A or 12V/2A
Input socket Type-onversion Rate(Phone):73%
Product Size: 145.5(VV)X89.9(D)X23.8(H)mm
Phone Output 15W/10W/7.5W/5W
Watch Output 2.5W
Earbuds Output 3.0W
PACKING LIST
Wireless Charger 1, Type-C quick charge cable1, User manual*1
FAQ
-
If you’re experiencing interrupted or slow charging, check the following:
(1) The back of your phone should not have any metal, pop sockets, or credit cards.
(2) Put the phone in the center of the charging surface (this lets the charging coil in your phone lineup with the one inside the wireless charger).
(3) The wireless charging coil on Sony phones is located slightly below the center.
(4) Phone cases should be no thicker than 5 mm for effective charging.
(5) Check whether the adapter is QC3.0 fast charger. -
If you’re failing to charge your device, please try out the following:
(1) Please restart your cell phone and test with another USB cable.
(2) Please check whether the indicator turns on or not
(3) The wireless charging coil on Sony phones is located slightly below the center.
(4) Phone cases should be no thicker than 5 mm for effective charging.
(5) Check whether the adapter is QC3.0 fast charger. -
If you’re using the recommended wireless charger with the QC3.0 Adapter and have removed any potential charging obstructions, but are still experiencing issues, try this (1) Replacing the cable connecting your wireless charger.
(2) Rebooting your phone.
(3) Unplug the adapter and reinsert -
Charging is still slow.
The mobile phone itself or the external receiving coil allows the wireless charging current is charging. It is recommended to reduce or close the application. -
The phone is charging intermittently, or the indicator light flashes.
If the charging current is not enough, please use an adapter with sufficient power of 9V/2A or 18W above. -
Charging fever.
It is normal for the receiving coil or transmitter board to generate heat during wireless charging. the lithe wireless charger is too hot, please take your phone off it, when the wireless charger is cooled down, please charge it again. -
The charger does not work.
Do not put metal debris or magnetic cards on the charging area. If the product does not work due to overheating. please take off the phone and charge it again when it is cooled down. -
If there are other problems, please contact our after-sales for a solution.
WARNING
- Avoid using the product at places that are wet, humid, or have a high temperature.
- Avoid dropping the product from high places.
- Do not disassemble the product by yourself. Please contact us if necessary.
- Do not clean the product unless the unit is powered off.
- It is recommended to use an 18W or above adapter to charge 3 smart devices at the same time
All products brands and trademarks are property of their respective owners
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.