HEADRUSH 8092992 Wireless Party Speaker Instruction Manual

HEADRUSH 8092992 Wireless Party Speaker Instruction Manual

The Bluetooth°word mark and logos are registered trademarks owned by Bluetoothe’SIG, Inc. and any use of such marks by The Source (Bell) Electronics Inc. isunder license. Other trademarks and trade names are those of their respectiveowners.

COMPONENT IDENTIFICATION

1. MIC/guitarbutton
2. Power/modebutton
3. Bluetooth®button
4. Lightmodebutton
5. Party/Broadcastbutton
6. Bassboostbutton
7. MIC/guitarvolume button
8. MICechobutton
9. Volume-
10. Play/Pause
11. Volume+
12. MlCbassbutton
13. MICtreblebutton
14. Guitarjack
15. MIC jack
16. ResetHole
17. Aux inJack
18. USB-C port

PRODUCT OVERVIEW

Youcanusethisitemwithanycompatible,BluetoothLenableddevicetostreammusicand enjoyhands-freecalling.Pleasereadthismanualfirstbeforeusing. ThisspeakerhasanIPX4rating:Protectedagainstsplashingwater.

OPERATION

OFFwillappearontheLEDdisplay.
Play/pause
Press the r’s| Press the button to play. press to pause. press again tore sume.
Nexttradc| -Press and hold the button.
Reitioustrack| Press and hold the button.
Increasevolume| Press the button.
Decreasevolume| Pressthe button.
SwitchtoAUXmode| Press theibutton. .
Changel[ghtmode| Press thebutton.
Switch to Mcrophone/karaoke/Guitarmode|
Plug in 6.35mm Microphone input.
Bassboost| Press thegass boostbutton totumONwhenplayingmusic. PressagaintoturnOFF.
Increase/decrease mic treble in| Press thelbutton.
rricro phone/Icaraokemode
Increase/decrease bass in| Press thelobuon.
micro phone/Icaraokemode
Increase/decreasemicechoin micro phone/karaokemode| Press thegdbutton.
Increase/deaeaseMicvolumeinm icrophonefkaraokemode| Press thCbutton.
Pairvia Bluetooth| Press the button.
Factoryreset| In any modes, press the Power On and Play/Pause key for 3 seconds at the same time

STATUS INDICATOR

LEDdisplay| flashing| Pairingmode
---|---|---
AUXON| AUXmode
flashing| Broadcastmode
A-00| Speakervolume
L-00| MlCvolume
G-00|  Guitarvolume

CHARGING

Usetheincludedchargingcabletofultychargethespeakerbeforefirstuse.ltwilltake approximately5hourstofullycharge. –

• TheredLEDwillbeONwhilethespeakerischarging –
• TheredLEDwillturnOFFoncechargingiscomplete

TIP: When the battery is low, the speaker will beep every few seconds, please charge thespeaker.Ifitisnotpl uggedintochargewithi napproximately1 Omin utes,itwillturnOFF.Thes peakerwillautomaticallypowerOFFifnotinusefor3Ominutes.

PAIRING

1. Pressthe  tontoturnthespeakerON.ThespeakerwillchimeandtheLEDdisplaywillshowA—and2digitsindicatingthevolumelevel,forexampleA-08.
2. The buttonwillflashtoindicatethespeakerisreadytopair.
3. TurnBluetooth ONinyourdevicesettingsandselect”HRB5043″.Thespeakerwillchime.0 ncepairedsuccessfully,theiconontheLCDdisplaywillbeON. NOTE:Ifthereisnodevicepairedwithin30minutesthespeakerwillturnOFF.Toun-pa ir, di scan nectinyou rdevi cesettings.Thespeakerwi I la utomatica I lypa irwithpreviouslypai redd evic esprovid ed Blu etoothqs0Nandwith in range.Thespea kerwi Ilchi metoi nd icatethatithassuccessfu I lyr e-paired.IfyourdevicedoesnotdiscovertheH RSP5043speaker,pressthebutton andrepeatthe pairingprocess.

MICROPHONE AND KARAOKE MODE

PlugyourmicrophoneintotheMICjack.ThewillaeyearontheLEDdisplay.

1. Toturnthevolumeupordown,pressthe buttorcolumelevelscanbeadjusted,fromL— 01 to L —16.
2. ForKaraoklchoosemusicfromyourdeviceandsingalong.
3. Pressthe ± buttontoincreaseordecreasetheecho.TheLEDdisplaywillbrieflydisplay E-00uptoE-16andthenrevertbacktoshowthevolumelevel.
4. Pressthe buttontoincreaseordecreasebass.
5. Pressthe buttontoincreaseordecreasetreble.

NOTE:Afteryoupluginthemicrophone,L 00willshowontheLEDdisplayfor1Oseconds.ftwillthenrevertbacktothevolumeA-00.Alwayssetthevolumetoaminimumlevelbeforeplugginginorunpluggingamicrophone.

GUITARMODE

Ifusinganelectricguitar,plugitintotheguitarjack.ThelconwitshowintheLEDdisplay.DONOTplu gthisintothemicrophonejack.
NOTE:Afteryoupluginaguitar,G-00willshowontheLEDdisplayfor1Oseconds.ftwillthenrevertbacktothevolumeA-08.

LEDLIGHTEFFECT

• Press thebuttontoselectfromthe4availablelightmodes.
  1. Multi-colourlightrotation
  2. Lig htdanci ng
  3. Half light rotation
  4. Halflightdancing 5. OFF
• Pressandholdthe buttontochangetoasinglecolourandthenpress buttontochange colours (choosefrom 7colour options)
• Pressandholdthe buttontoreturntothedifferentlightmodeoptions

HARDWARE RESET

Toresetthespeakerifitbecomesunresponsive,insertaneedleintotheresethole.Thespeakerwillturn OFFthenturnbackON

FACTORY RESET

In any modes, press the Power On and Play/Pause key for 3 seconds at the same time.

LINE-IN(AUXIN)MODE

1. Usethesupplied3.5mmaudiocabletoconnectthespeakerdirectlywithyourdevice.
2. AUXwillshowinthedisplay.

NOTE: LINE-IN will take priority over the Bluetoothe connection. To switch to Bluetoothemode,pressthe button.

IPX4RATING

ThisproducthasanIPX4rating,itisprotectedfromsplashingwater.Toavoidwaterdamageto the speaker please: 1. ThoroughlydrythechargingportdrybeforeconnectingACpower. 2. Keeptheprotectivecoversclosedsecurelybeforeexposingthespeakertospla shingwater.

PARTY/BROADCASTPAIRING

1. Turn the speakers on and Bluetooth ON, then select one HRSP 5043 from your Bluetooth device list as primary speaker.
2. Turntheother speakersON,press and holdthebuttononallspeakerstoenterparty/broadcastmode.
3. Thespeakerswillpairautomatically,and’A’willshowintheLEDdisplayontheprimaryspeakera nd’B’willshowintheLEDdisplayfortheotherspeakers.
4. Toexitparty/broadcastmode,pressandholdthebuttons

NOTE: Audiocontrolcanonlybeadjustedontheprimaryspeaker.lftherearetwodevicesconnectedtot hespeaker,pressthe(useparty/broadcasticon)buttontodisconnectonedevice.TWSpairingwillnot workwhenspeakersarebeingusedinbroadcastmode.

TWSPAIRING

1. Turn ON two HRSP 5043 Party Base speakers and press and hold the button on bothspeakerssimultaneously.
2. ThespeakerswillenterstereopairingmodeandtheiconontheLEDdisplaywill ftashwhite.
3. Whenpairedsuccessfully,’A’willlightupontheLEDdisplayontheprimaryspeaker,andthe’Biwillli ghtupontheLEDdisplayonthesecondaryspeaker.
4. TurnBluetoothoONinyourdevicesettingsandselectHRSP5043.
5.  ThewilllightupintheLEDdisplayonbothspeakersafteryourdevicehaspaired.

NOTE: Pressandholdthe buttonsagaintoexitTWSpairingmode

TROUBLESHOOTING

NoSound:

• Ensurethespeakerischargedandhasenoughbatterypowerforoperation
• Ensure the speaker isswitched ON
• EnsureBluetoottVdeviceisON
• Thevolumeofthespeakeristoolow,adjustthevolumetoanappropriatelevel NOTE:Ifthespeakerbeepseveryfewseconds,thebatteryislow.Pleaserechargethespeaker.Nopow er/Lowbatteryprompttone
• Batterymaybeinprotectionmodeordrained.Chargethespeakerfor6hoursPoors oundquality/buzzingsound
• Ensuretherearenoobstaclesbetweenthespeakerandthedeviceandthattheyarewithinan effectiverange
• Checkyournetworkonyourdevice
• Connect with another deviceSpeakerdoesnotpair/discon nect
• Movethespeakeranddevicesotheyarecloser(within1m)
• TurnOFFallotherBluetooth*devicesordisabletheirBluetooth® ,
• Clearthespeakermemoryorpairittoanewdevicebypressingthe buttonddholdtheE> buttonfor3seconds
• ClearyourphonepairinglistandpairtheBluetooth*devicewiththespeakermanuallyNosound/lowvolume
• Increasethespeaker/devicevolumeandensurethatthesoundonyourdeviceisno muted
• Ensurethespeakerandthedevicearewithin1 mofeachother
• Turn OFF your speaker and reconnect your device
• Connectwithadifferentdevice
• Chargeyourspeaker for6hoursMicrophoneisencounteringfeedback
• Turntheechoeffectdown
• Orientthemicrophonesothatitisnotpointingdirectlyatthespeaker
• Tryadifferentmicrophone
• Tryadifferentpositionforthespeakerand/orvocalistonstage
• Increasethedistancefromthespeakertothemicrophone
• lfusingavocaleffectsprocessor,makesureitisnotcontributingtothefeedbackprob em

TECHNICAL SPECIFICATIONS

• Outputpower: 60w

• Bluetooth version:
  Bluetooth®5.2Batterycapacity: 7.4V/5200mAh

• Chargingtime: Around 5-6

• hoursFrequencyresponse: 50Hz-

• 18kHz Operationdistance: Upto10m(33¢ft.)T

• WSdistance: 10m (33ft.)

• Playtime: 8hours

NOTE: This speaker is in compliance with the specified Bluetooth*version. It does notguaranteecompatibilitywithallthefunctionsoneveryBluetooth®-
enableddevice. Pleasecheckyourmobilephone’susermanualforcompatibilityandfunctionality.

WARNING:Changes or modifications to this unit notexpressly approved by the party responsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment.

IC Caution

Radio Standards Specification RSS-Gen, issue 5

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

THE SOURCE WARRANTY

TheSourcewarrantsthatthisproductwillbefreefromdefectsinmaterialsandworkmanshipforaperiodoftwelve( 1 2)monthsfromthedateofpurchase.Withinthisperiod, simplytaketheproductandyourproofofpurchasetoanyTh eSourcestoreorparticipatingdealerandtheproductwillbereplaced(whereavailable)withoutcharge.Anyproductwhichhasbeensubjecttomisuseoraccidentaidamageisexcludedfromthiswarranty.

ThiswarrantyisonlyapplicabletoaproductpurchasedthroughTheSourcecompany-
ownedstoresorparticipatingdealersinCanadawherethewarrantyisincludedwiththeproduct.

Whilethiswarrantydoesnotconferanytegalrightsotherthanthosesetoutabove, youmayhaveadditionalstatutoryrightswhichwillvary underthelawsofthevariouscountries states provincesandothergovernmentalentitiesinwhichThe Source operates. This warranty is subject toall statutory rights you may have in Canada.

Importedby:

TheSource, Barrie, Ontario, Canada,L4M4W5Manufactured in

China www.thesource.ca
©2021 TheSource.Allrightsreserved.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to
  which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:

1. This device may not cause harmful
   interference, and

2. this device must accept any interference received,
   including interference that may cause undesired operation.

RF Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>