Dgl Group RSS-JS-ELMV-WHT LED Vanity Mirror User Guide
- June 6, 2024
- DGL GROUP
Table of Contents
LED Vanity
Mirror
YOUR 4-IN-1 SMART MIRROR
WIRELESSLY STREAM MUSIC, CHARGE YOUR SMARTPHONE OR CREATE VIDEO CONTENT ALL FROM THIS 4 IN 1 SMART MIRROR!
FEATURES
- 20 BUILT-IN LED LIGHTS
- 180 ° HORIZONTAL ROTATION
- 10X MAGNIFICATION MIRROR
- SMARTPHONE HOLDER
WIRELESS CHARGING
- INPUT: 5V / 2A
- OUTPUT: 5W
- TRANSMISSION DISTANCE:< 8MM
- WORKING FREQUENCY: 110-205KHZ
SPEAKER SPECIFICATIONS
- BATTERY TYPE: 3.7V/1200MAH LITHIUM-ION BATTERY
- OUTPUT: 40/3W*2
- BLUETOOTH VERSION: V5.o
- BLUETOOTH RANGE: 32 FEET (10 METERS)
- CHARGING TIME: 3-4 HOURS
- PLAYTIME: 1.5-2.5 HOURS
·APPLICABLE AT 50% OF MAXIMUM VOLUME RESULTS WILL BE LOWER WHEN VOLUME IS HIGHER
PACKAGING CONTENTS
- 4 IN 1 SMART MIRROR
- 10X MAGNIFICATION MIRROR
- USB CHARGING CABLE
- USER MANUAL
0PE RATION G U I DE
CHARGING
- INSERT THE USB CHARGING CABLE’S MICRO USB PLUG INTO THE CHARGING PORT ON YOUR MIRROR
- INSERT THE USB CHARGING CABLES INTO THE USB PORT OF A COMPUTER OR SUITABLE USB CHARGING ADAPTER
- AN LED INDICATOR LIGHT WILL TURN RED WHILE THE MIRROR IS CHARGING AND TURN OFF ONCE CHARGING IS COMPLETE. CHARGING
TAKES APPROXIMATELY 3-4 HOURS. UNPLUG WHEN CHARGING IS COMPLETE
BLUETOOTH PAIRING
- PRESS AND HOLD THE POWER BUTTON FOR 3-4 SECONDS TO POWER ON THE SPEAKER.
- THE LED INDICATOR LIGHT ON THE CHARGING PORT WILL TURN BLUE AND FLASH RAPIDLY TO INDICATE THAT MIRROR IS IN PAIRING MODE.
- GO TO THE BLUETOOTH SETTINGS MENU ON YOUR PHONE. MAKE SURE BLUETOOTH IS TURNED ON. CONNECT TO THE DEVICE LISTED AS “MR4357”
- THE LED INDICATOR LIGHT WILL REMAIN BLUE AND FLASH SLOWLY TO INDICATE THAT SPEAKER IS PAIRED WITH YOUR PHONE
CONTROLLING MUSIC
PRESS AND HOLD
FOR臼SECONDS TO POWER THE SPEAKER ON OR OFF
PRESS TO ANSWER OR END A PHONE CALL
PRESS ONCE TO SKIP TO THE NEXT TRACK.
PRESS AND HOLD TO REJECT A CALL
PRESS AND HOLD TO INCREASE VOLUME
4PRESS ONCE TO RETURN TO THE LAST TRACK
PRESS丁0 PLAY OR PAUSE A SONG
PRESS AND HOLD TO DECREASE VOLUME
LED LIGHTING CONTROL
- SLIDE POWER SWITCH ON THE BACK TO THE “ON’POSITION
- TAP THE LED LIGHTING BUTTON IN FRONT OF THE MIRROR TO TURN ON OR OFF THE LED LIGHTS
- HOLD THE LED LIGHTING BUTTON TO DIM THE LIGHTS
WIRELESS CHARGER
-
PLUG ONE END OF THE INCLUDED CHARGING CABLE INTO THE WIRELESS CHARGER POWER PORT. PLUG THE OTHER END INTO A
1 AMP OR HIGHER USB WALL CHARGER -
PLACE YOUR PHONE ON THE WIRELESS CHARGING PAD. FOR BEST RESULTS MAKE SURE YOUR PHONE IS AS CLOSE TO THE CENTER AS POSSIBLE
-
ONLY ONE SMART DEVICE CAN BE CHARGED AT A TIME. DO NOT ATTEMPT TO CHARGE MULTIPLE DEVICES AT ONCE
-
THE WIRELESS CHARGING STATUS LIGHT WILL FLASH GREEN AND THEN TURN RED WHEN THE CHARGING PAD IS POWERED ON
-
LIGHT IS GREEN WHILE THE DEVICE IS CHARGING. LIGHT TURNS RED ONCE CHARGING IS COMPLETE
-
ONLY ONE SMART DEVICE CAN BE CHARGED AT A TIME. DO NOT ATTEMPT TO CHARGE MULTIPLE DEVICES AT ONCE
-
DO NOT PLACE METALLIC ITEMS LIKE COINS ON THE CHARGING PAD
WARNINGS & MAINTENANCE
- READ ALL INSTRUCTIONS BEFORE USING YOUR MIRROR
- NEVER EXPOSE YOUR MIRROR TO WATER
- DO NOT EXPOSE YOUR MIRROR TO EXTREME TEMPERATURES
- DO NOT ALLOW CHILDREN TO PLAY WITH MIRROR UNSUPERVISED
- DO NOT USE YOUR MIRROR AT TEMPERATURES UNDER 32 ° F (0 ° C) OR OVER 104 ° F (40 ° C). KEEP OUT OF DIRECT SUNLIGHT
- DO NOT USE IN EXTREMELY DRY ENVIRONMENTS AS THIS CAN LEAD TO STATIC DISCHARGE DURING USAGE
- DO NOT PLACE METALLIC ITEMS, LIKE COINS, ON THE CHARGING PAD
- DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF
- UNPLUG THIS DEVICE WHEN NOT IN USE FOR EXTENDED PERIODS OF TIME OR DURING LIGHTING STORMS
- DO NOT PLACE NEAR OBJECTS THAT GENERATE A STRONG MAGNETIC FIELD
- WHEN NOT IN USE, STORE YOUR MIRROR IN A COOL DRY PLACE
- CLEAN YOUR MIRROR USING A SOFT CLOTH OR PAPER TOWEL. DO NOT USE HARSH CHEMICALS WHEN CLEANING YOUR MIRROR. NEVER SUBMERGE UNDERWATER.
- PLEASE RECYCLE OR DISPOSE OF YOUR MIRROR PROPERLY BASED ON THE LAWS AND RULES OF YOUR MUNICIPALITY. CONTACT LOCAL RECYCLING FACILITIES FOR FURTHER INSTRUCTIONS
FCC STATEMENT
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
RF warning statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.