blurams A10C Smart Home Camera User Manual
- June 6, 2024
- blurams
Table of Contents
blurams A10C Smart Home Camera User Manual
Package Information
After removing the package, please check if the camera is in good condition and the accessories are complete.
-
1x Camera
-
1x USB cable & Power adapter
-
1x Screw accessory pack
-
1x mounting Base
-
1x Manual
Camera Component
-
Front
-
Back
Installation instructions
-
Placing the camera in a best position.
-
Power on this camera to a power socket via the USB cable.
-
Installation Tips
You can follow this to install the camera: -
Choose the location where you exactly want to put the camera.
-
Place the mounting tab on the wall and drill through it to make holes for making first.
-
Aligning this IP camera with the mounting tab.
-
Place the camera over the fastened mounting tab and rotate it until it’s locked and secured.
Quick configuration
-
Connecting the IP camera to power socket with a usb cable.
-
Make sure your phone is connecting to a 2.4G WiFi network. Then scan the QR code and download the blurams app which is for free.
-
Register and log into the blurams account.
-
Following the app instruction to add the camera.
-
Live View:
Enter into the video interface on the blurams App, where you can live view the videos or choose the setting options such as voice command, two-way audio, snapshot and video recording.
-
Parameters Setting:
Tap setting options to enter the setting interface, where various custom setting are available.
FAQs
Measures against camera-network connection failure:
- The camera does not support 5G WiFi network temporarily. Please make sure the WiFi network around the camera is in good condition.
- Re-plug the power supply to assure the reliable connection.
- Reconfigure the camera.
- Customer service E-mail: [email protected].
Indicator light connotation:
| Green Light | Online |
|---|---|
| Green Light Blinking | Connecting |
| Red Light | Starting |
| Red Light Blinking | Waiting for scan |
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules.
These limits aredesigned to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
FCC ID: 2ASAQ-A10C
