blurams A12S FoldVue Cam User Manual
- June 2, 2024
- blurams
Table of Contents
Fold Vue Cam – A12S
User Manual
A12S FoldVue Cam
https://helpcenter.blurams.com/hc/en-us/sections/360008609214-Multilingual- Manual-Guide
Packing list
- Camera
- Type-C interface & Power adapter
- Screw accessory pack
- Plotting sheet
- Manual
Get to know your camera
- Indicator light
- Reset button
- Microphone
- microSD card slot
- Type-C interface
Congratulations!
Your camera is ready to use. Thank you for choosing breams.
| |
---|---|---
https://www.facebook.com/blurams/|
https://www.instagram.com/blurams?utm_source=qr|
https://helpcenter.blurams.com/hc/en-
us/community/topics
Contact us to extend the product warranty for another 180 days
support@blurams.com
www.blurams.com
Plug in your camera
Plug the power adapter into a power outlet with Type-C cable connected.
Please use the items included in the original package for optimal performance.
https://www.blurams.com/app/1540795774407
Download blurams App
Download the App by searching “blurams” in the App Store or Google Play.
Alternatively, you can open a QR scanner App and scan the blurams App QR code
below to install the App.
Add your camera into App
Enter into the blurams App, sign up for a free blurams account and log in. Go
to the home page and Click the “+” icon on the top right corner, select your
camera.
Please follow the instruction on the App interface to add your camera.
Use of access to the cameras via a web interface
After you have installed the camera on your mobile phone and created an
account with blurams there, you can also access the camera via a browser
(Chrome, Firefox, Edge).
Please enter the following address in the address line:
https://client.blurams.com/login
Enter your registered email address, password and a verification code.
Click on your camera and the live image will appear. At the top right you will
find a gear symbol. If you click on it you can change the settings of the
camera and see the recordings made.
Customer Service
+1 (855) 917 4591
(Mon-Fri 08:00 AM – 05:00 PM Pacifc Time)
support@blurams.com
- Do not use the camera in the environment at too high or too low temperature, never expose the camera under strong sunshine or too wet environment. The suitable temperature for the product and accessories is -10°C-50°C.
- The plug considered as disconnect device of adapter. If you use a third-party charger, the recommended output voltage/current of the adaptor is DC 5V/1A, and the adapter shall be CE approval type.
- RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body.
- To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
- Wi-Fi Operating Frequency Range: 2412MHz~2472MHz; Wi-Fi Max Output Power: 17.13dBm(EIRP)
- Wi-Fi Operating Frequency Range: 5150MHz~5850MHz; Wi-Fi Max Output Power: 13.7dBm(EIRP)
- This product can be used across EU member states.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
FCC ID: 2ASAQ-A1XX
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>