blurams A20 Outdoor Lite Camera 2K User Manual
- June 6, 2024
- blurams
Table of Contents
blurams A20 Outdoor Lite Camera 2K
Packing list
Get to know your camera
Plug in your camera
Plug the power adapter into a power outlet with cable connected. Please use the items included in the original package for optimal performance.
The camera has a power supply port and a LAN port. Waterproof must be done on both these ports.
- Wrap the power supply port with the waterproof tape as shown below.
- Wrap the LAN port with the waterproof tape or a waterproof tube.
- Wrapping with the waterproof tape
- Using the waterproof tape on the power supply port
- Using a waterproof tube on the LAN port
- Wrapping with the waterproof tube
Download blurams App
Download the App by searching “blurams” in the App Store or Google Play. Alternatively, you can open a QR scanner App and scan the blurams App QR code below to install the App.
Add your camera into App
Enter into the blurams App, sign up for a free blurams account and log in. Go to the home page and Click the “+” icon on the top right corner, select your camera. Please follow the instruction on the App interface to add your camera.
FAQs
If you encounter any troubles in product information, product installation and
use, please refer to the “Mine > Help And Feedback” in blurs app or email at
support@blurams.com.
Give us your feedback blurams strive for a high-quality product and user
experience, we’re eager to hear your feedback or suggestions. Send your
feedback through the App or email at
support@blurams.com.
Do not use the camera in an environment at too high or too low a temperature,
never expose the camera under strong sunshine or in too wet environment.The
suitable temperature for the product and accessories is -20℃-50℃.
The charger type is TEKA012-1201000EU, XED-CE120100CC, output voltage/current
is 12Vdc/1A. The plug is considered as a disconnect device of adapter. If you
use a third-party charger, the recommended output voltage/current of the
adaptor is 12Vdc/1A, and the adapter shall be CE approval type. RF exposure
information: The Maximum Permissible Exposure (MPE) level has been calculated
based on a distance of d=20 cm between the device and the human body. To
maintain compliance with RF exposure requirements, use products that maintains
a 20cm distance between the device and the human body.
- Operating Frequency Range: 2412 MHz ~ 2472 MHz
- Max Output Power:< 20dBm
This product can be used across EU member states.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environments. This equipment should be installed and operated
with a minimum distance 20cm between the radiator and your body.
FCC ID: 2ASAQ-A20
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>