camry CR 4443 Coffee Grinder User Manual

: June 6, 2024
: camry

Table of Contents

CLEANING AND MAINTENANCE
TECHNICAL DATA
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

CR 4443
user manual

SAFETY CONDITIONS. IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different if the device is used for commercial purposes.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 230V ~50Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let the cord hang over the edge of the counter.
Do not immerse the motor unit in water.
Always operate the grinder with the safety lid securely in place. Keep hands and objects out of the coffee hopper while grinding and when the appliance is plugged in. Make sure there are no foreign bodies in the beans before you start grinding.
Do not use the appliance when it is empty.

PRODUCT DESCRIPTION (Fig. A):

Bean hopper
Bean hopper lid
Body of the appliance
ON/OFF switch
Removable upper mill
Ground coffee holder
Ground coffee holder lid
Number of cups selector
Ground coffee fineness selector
Ground coffee dispenser

BEFORE FIRST USE
Clean the ground coffee holder (6), the ground coffee holder lid (7), and the bean hopper lid (2) with warm soapy water. Clean the inside of the bean hopper (1) with a damp cloth. Thoroughly dry the elements and place them back into the appliance.

USE

Fit the ground coffee holder (6) and the ground coffee holder lid (7) in the body of the appliance and make sure they are positioned correctly.
Remove the lid (2) and pour coffee beans into the hopper (1). Replace the bean hopper lid and make sure it is in the right position.
Set the desired amount of ground coffee by adjusting the number of cups selector (8).
Set the ground coffee fineness by adjusting the ground coffee fineness selector (9).
Connect the appliance to the power supply.
Press the ON/OFF switch (4) to start the appliance.
The appliance will stop automatically once the selected quantity has been ground.
To stop the appliance before grinding is complete, press the ON/OFF switch (4).
Remove the ground coffee holder, tap the container gently, remove the lid and pour the ground coffee directly into the espresso machine filter.

CLEANING AND MAINTENANCE

Always unplug the appliance before cleaning.
Do not use detergents or cleaners.
Clean the lids and the ground coffee holder in warm soapy water or in a dishwashing machine.
To remove the upper mill (5), set the ground coffee fineness selector (9) to the minimum position. Take hold of the side elements of the
upper mill. Turn it clockwise and lift vertically.
Thoroughly clean the inside of the bean hopper (1) with a damp cloth.
To replace the upper mill, set the ground coffee fineness selector (9) to the maximum position, insert the removable upper mill and turn it around counter-clockwise one time.
Clean the body of the appliance and the dispenser with a damp cloth.

TECHNICAL DATA

Power supply: 220-240V ~50/60Hz
Power: 200W
Device is made in class II of insulation. The device is compliant with EU directives:

Low voltage directive (LVD)
Electromagnetic compatibility (EMC)
Device marked CE mark on the rating label

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.

www.camryhome.eu