camry CR 4498 Coffee Maker User Manual

CR 4498

**SAFETY CONDITIONS

**

IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purposes.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3. The applicable voltage is 220-240V ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
4. Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
7. Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc.. Never use the product in humid conditions.
8. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
9. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
10. Place the device on a cool, stable, even surface, away from any kitchen appliances that heat up, such as: electric cooker, gas burner, etc.
11.  Never use the product close to combustibles.
12. Do not let the cord hang over the edge of the counter.
13. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
14. For additional protection, it is advisable to install a residual current device (RCD) in the electrical circuit with a rated residual current not exceeding 30 mm. A specialist electrician should be consulted in this regard.
15. NOTE: The milk frother has a heating function. Be very careful while opening the lid and pouring milk in so as to avoid getting burnt.
16. To avoid being splashed with milk or foam (which may be hot), always put the lid on the milk frother before you switch it on.
17. Hold the milk frother by the handle (1e). The pot housing becomes hot during operation.

DEVICE DESCRIPTION

a. Lid
b. Whisk for milk frothing
c. Whisk for heating milk
d. Maximum filling level mark
e. Handle
f. Milk jug
g. Control button
h. Power base
i. Heating plate
Filling level indicators
a. MAX level for heating milk:350ml (2a)
b. MAX level for cold / hot milk frothing:250ml (2b)

INSTRUCTIONS FOR USE

1. Choose the whisk for the desired effect. Whisk for milk frothing (1b). If you want your milk frothed. Whisk for heating the milk (1c). If you want your milk heated.

2. Pour in a portion of milk (preferably 3.2% fat). The milk should cover the whisk (1b or 1c), and reach the marked minimum level but not exceed the maximum level mark (1d). The maximum level for milk heating is 350ml (2a) and for milk, frothing is 250ml (2b).
   NOTE: For best results use cold, fresh milk. Non-dairy milk doesn’t froth as well as dairy milk. For best effect use “barista” type plant-based milk.
   NOTE: Do not exceed the MAX line inside the jug.

3. Put the lid (1a) on the jug and place the jug on the power base (1h). Insert the power plug into an electrical outlet. The mode icons will light up for one second.

4. Touch the control button (1g) and choose desired program: cappuccino, latte, hot chocolate, cold.
   – once – if you want to heat and froth your milk (with whisk 1b) to get the cappuccino froth
   – twice – if you want to heat and froth your milk (with whisk 1b) to get the latte froth
   – three times – if you want to heat and froth your milk (with whisk 1b) to prepare hot chocolate. Or if you want only to heat your milk (with whisk 1c).
   – four times – if you want your milk to keep cold and just froth it (with whisk 1b) for iced coffee or flavored milk.
   The light above the function will flash for 2 seconds and the milk frother will start working automatically.

5. The appliance will run until a high temperature of the milk is reached. Once it’s done it will stop automatically and beep three times.
   NOTE: AFTER OPERATING BOTTOM OF THE JUG IS HOT. DO NOT TOUCH IT!
   NOTE: DO NOT TOUCH THE HEATING PLATE (1i).

6. To turn off the appliance before the end of the cycle, press the control button (1g) during work.
   NOTE: DO NOT take off the jug from the heating plate when its operating.
   NOTE: Milk heats to approximately 68-78°C. This temperature ensures the best flavor of the coffee.

CLEANING AND MAINTENANCE

1. Before washing the appliance, make sure it cooled down and is disconnected from the power socket.

2. Always remove the jug from the power base before cleaning.

3. Clean jug with a soft cloth and washing-up liquid.

4. The device should be washed after each use.
   IMPORTANT: Do not put milk frother base into water.
   NOTE: The milk jug is dishwasher safe but should not be washed in higher temperatures than 70°C/ 158°F.

5. You can also clean the frother by pouring water into it and running for one cycle (this prevents the whisk from blocking by milk sediments accumulating on the agitator shaft seal).

TECHNICAL DATA:

Power supply: 220-240V ~50/60Hz
Power: 500W
Maximum power: 1000W
Capacity: frothed: 250ml / heated: 350ml
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.

www.camryhome.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>