MONSTER MS22101 Bluetooth Speaker, Adventurer Max IPX7 Waterproof User Guide
- June 6, 2024
- Monster
Table of Contents
MONSTER MS22101 Bluetooth Speaker, Adventurer Max IPX7 Waterproof
Product Overview
- Speaker Unit
- USB-C Charging Cable
- AUX IN Audio Cable
- Baldric
- Quick Start Guide & Warranty Letterl.
-
Power On/Off Button, Mode Button, audio input selection
Charging LED Indicator -
Bluetooth Pairing, disconnect/connect, Mode LED Indicator
-
Volume Control”-” Button, volume down, track backward
-
Multi Function Button (MFB), music play/pause … Indoor/outdoor audio switching
-
Volume Control “+” Button, volume up, track forward6. USB-C Charging Input
-
Reset Button
-
AUX IN Port
-
MIC IN Port (6.35mm)
-
.USB IN (Audio) Port
-
.SDSlot
-
Handle
Power/Charging
For better enjoyment, you should fully charge the speaker before use.
The package includes a USB-C charging cable (change only, no data transfer
function) that can be connected to your computer or other device made for
standard USB compatible charging. Charing with 5V/2A or above power adapter
(not included).
Caution: ONLY use computer USB output or standard 5 volt only power adapter for charging.
Damage may occur if non-standard USB power adapter is used for charging. Do not charge if connector and/or device is wet or damaged.
Power On/Off
In power off mode, press and hold the Power On/Off Button for about 2 seconds
to power on the speaker, you hear the opening tone.
To power off the speaker, press and hold the Power On/Off Button for about 2
seconds again, you will hear a shutdown tone.
Caution: If no Bluetooth device is connected, the speaker will be turned
off within about 15 minutes.
Pairing
- When you unbox the speaker and power it on for the first time, it will enter to pairing mode automatically.
- If Bluetooth device is connected, press and hold the Bluetooth button for about 3 seconds, disconnect and ready to pair another device.
- If speaker does not connect any Bluetooth device, it will enter to pairing mode automatically.During pairing, activate Bluetooth on your phone and set it to search for new Monster device for pairing. When the speaker is connected successfully, connected tone will be heard and the blue LED will stop flashing and the LED indicator will remain on.
Volume Control
Short press the Volume Button”+” or”-” to turn volume up or down.
Music
Play/Pause: In the music playback mode, press the MFB to play/pause music.
Track forward: In the music playback mode, press and hold the Volume”+” Button
for 2 seconds for next song.
Track backward: In the music playback mode, press and hold the Volume “-”
Button for 2 seconds for previous song.
SD Card Playback
When speaker is on and SD card is inserted, SD card is the priority playback
source. If you want to use Bluetooth function, press the “00” Button to switch
the source.
AUX IN Playback
When speaker is on and audio source is inserted via AUX IN, AUX IN is the
priority playback source. If you want to use Bluetooth function, press the
“(1)” Button to switch the source.
use IN (Audio) Playbackb When speaker is on and USB drive is inserted,
USB IN (Audio)
is the priority playback source. If you want to use Bluetooth function,
press the “(1)” Button to switch the source.
Playback Priority
The Bluetooth mode is the default playback mode, when there are multiple audio
sources, the playback priority is as follows:
- SD Mode – first priority
- AUXIN Mode – second priority
- USB IN (AUDIO} Mode – third priority
- Bluetooth Mode – fourth priority
Audio source can be switched by press the “())” Button, the sequence is as follows:
- In Bluetooth mode, when no device is connected, the speaker will be switched off automatically in 15 minutes.
- SD card mode/AUX IN mode/ USB IN (AUDIO) mode or Bluetooth mode, no music playback for 15 minutes, the speaker will be switched off automatically. If microphone is plugged in and idled over 15 minutes, the speaker will be switched off automatically.
Indoor/outdoor audio mode switching
When the speaker is on, press and hold the multi-function button for 3 seconds
to switch the indoor/outdoor sound mode.
Reset Device
If there is a malfunction, press the Reset Button by using a paper clip.
LED Indicator Guide
Special Note:
-@ indicates the handle of the Bluetooth speaker. maximum weight cannot exceed 25kg to avoid any accidents.
Battery Use Caution:
- It is not recommended to replace the battery privately.
- The battery (battery pack or battery pack combination) must not be exposed to sunshine, fire or similar overheated environment
fcc statement
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>